User manual ACR ELECTRONICS GLOBALWATCH2 AIS INSTALLATION MANUAL V1.0

[. . . ] TM GlobalWatch Installation Manual Version 1. 0 2 AIS Y1-03-0183-1 Rev. A Please read this first! Warning: Although ACR strives for accuracy in all its publications; this material may contain errors or omissions, and is subject to change without prior notice. ACR shall not be made liable for any specific, indirect, incidental or consequential damages as a result of its use. ACR components may only be used in safety of life devices or systems, with the express written approval of ACR, as the failure of such components could cause the failure of the ACR device or system. [. . . ] A Version 1. 0 N 1^24' E 0^17' |1>0. 10|2>1. 30|3>1. 80nm ---------------------------------------++++++++++++++++++++++++++++++++++++++++ Service password protected!Please enter service password: ++++++++++++++++++++++++++++++++++++++++ ---------------------------------------| Enter | | | Exit Select Submenu 1 "Change Service Password" with cursor button [Up] & [Down] by pressing Nr. 1 on the keyboard. N 1^21' E 0^14' |1>0. 01|2>1. 30|3>1. 80nm |---------------------------------| 6. | | -----| | Displ| ---------------------------------------NUM| Select->| | |<-Back GlobalWatch2TM AIS Installation Manual 10 Y1-03-0183-1 Rev. A Version 1. 0 Enter the new Password: Repeat the new Password: A minimum of 4, a maximum of 8 characters are allowed. Should the new password include numbers, use the shift key to generate them. N 1^25' E 0^18' |1>0. 10|2>1. 30|3>1. 80nm ******* Change Service Password ******** Enter new password : Repeat new password: {Length: 4. . 8 characters} ---------------------------------------| Save | | | Back Press Save to store the change. Changing the User Password Select Submenu 2 "User Password Settings" with cursor button [Up] & [Down] by pressing Nr. 2 on the keyboard. N 1^21' E 0^14' |1>0. 01|2>1. 30|3>1. 80nm |---------------------------------| 6. | | -----| | Displ| ---------------------------------------NUM| Select->| | |<-Back GlobalWatch2TM AIS Installation Manual 11 Y1-03-0183-1 Rev. A Version 1. 0 Select Submenu 1 "Change User Password" with cursor button [Up] & [Down] by pressing Nr. 1 on the keyboard. N 1^21' E 0^14' |1>0. 01|2>1. 30|3>1. 80nm |---------------------------------| 6-2. | | -----| | Displ| ---------------------------------------NUM| Select->| | |<-Back Enter the new Password: Repeat the new Password: A minimum of 4, a maximum of 8 characters are allowed. Should the new password include numbers, use the shift key to generate them. N 1^25' E 0^18' |1>0. 10|2>1. 30|3>1. 80nm ******* Change User Password *********** Enter new password : Repeat new password: {Length: 4. . 8 characters} ---------------------------------------| Save | | | Back Press Save to store the changes. GlobalWatch2TM AIS Installation Manual 12 Y1-03-0183-1 Rev. A Version 1. 0 4. 3 Changing the MMSI / IMO Numbers Select "Service Configuration" from the Main Menu with the cursor button [Up] & [Down] or press Nr. 6 on the keyboard. N 1^19' E 0^13' |1>0. 01|2>1. 30|3>1. 80nm |---------------------------------| Menu -----| | | +- 1. Display Settings -----| | Displ| ---------------------------------------NUM| Select->| | |<-Back Input Service Password and press [Enter]. N 1^23' E 0^16' |1>0. 01|2>1. 30|3>1. 80nm ---------------------------------------++++++++++++++++++++++++++++++++++++++++ Service password protected!Please enter service password: ++++++++++++++++++++++++++++++++++++++++ ---------------------------------------| Enter | | | Exit GlobalWatch2TM AIS Installation Manual 13 Y1-03-0183-1 Rev. A Version 1. 0 Select Submenu 3 "Change MMSI/IMO" with cursor button [Up] & [Down] by pressing Nr. 3 on the keyboard. N 1^21' E 0^14' |1>0. 01|2>1. 30|3>1. 80nm |---------------------------------| 6. | | -----| | Displ| ---------------------------------------NUM| Select->| | |<-Back Input new MMSI / IMO Numbers and press [Save] to store input data. It is very important that a number with one digit has to be used! N 1^21' E 0^14' |1> N/A|2>0. 00|3>0. 10nm ********** Change MMSI / IMO *********** MMSI :1193046 IMO No. :303174162 ---------------------------------------NUM| Save | | | Back GlobalWatch2TM AIS Installation Manual 14 Y1-03-0183-1 Rev. A Version 1. 0 4. 4 Inputing Voyage Related Data ­ (User Password Protected) Select "Voyage Settings" from the Main Menu with the cursor button [Up] & [Down] or press Nr. 3 on the keyboard Note: The default User Password is set to "NAUT" ­ please reconfigure it immediately after Transponder initial operation N 1^20' E 0^13' |1> N/A|2>0. 00|3>0. 10nm |---------------------------------| Menu -----| | | +- 1. [. . . ] A 1 2 3 4 5 6 7 8 A A 1, 5m ± 10mm 1 50±5 4 3) 4) B 1 1) 16, 17, 33 48, 49, 32 + 1) - B 6 2) 6) C 1, 2 Weitergabe sowie Vervielfaltigung dieser Unterlage, Verwertung und Mitteilung ihres Inhaltes nicht gestattet, soweit nicht ausdrucklich zugestanden. Alle Rechte vorbehalten, insbesonders fur den Fall der Patenterteilung oder GM-Eintragung. 6) 6, 7 3 3) 5) CH 4 ext. Display in + in - 21 22 in gnd 20 out + 18 out - 19 4 3 5 2 1 C 5 Paar verdrillt D 1) aufgeqetscht 2) Schirm auf Schale Pos 1 gelötet 3) Beschriftung unverwischbar aufgebracht (Siebdruck oder Klebeschild) D E 4) Beschriftung: "NAU-B508" Schiftgröße min. 1, 6 gelötet ANLIEFERFORM: Zu Ring gebunden, verpackt in PE-Beutel Toleranz Maßstab: 1:1 Masse: NAUTICAST ISO 2768-mK Datum Bearb. [. . . ]