User manual ADS TECH API-810 PYRO 1394B PCI

[. . . ] Be sure to remove the power cord completely from your computer as shown in the picture above. [. . . ] STEP 5: Locate an available PCI expansion slot*, then visually confirm that the PYRO 1394b PCI card will fit into the available slot you have chosen. STEP 6: If necessary, remove the knockout on the back of your computer which corresponds to the PCI slot you have confirmed as your selection. If there is a screw, place it in a safe place as you will be using it again to attach the PYRO 1394b PCI card. Apply pressure as needed (but do NOT force the card) until the edge connector is completely sealed; if the card is fully seated, then the gold connectors should be completely in the slot. STEP 8: Mount the PYRO 1394b PCI card in place with the screw you removed in "Step 6". Make sure the screw is firmly tightened so the PYRO 1394b PCI card does not slide out of it's seated position. [. . . ] STEP 10: Now that your PYRO 1394b PCI card is installed and the shell is in place, you can now safely connect the power cable. [. . . ]