User manual ADS TECH DLX-182 QUICKGUIDE

[. . . ] Just plug in your digital camcorder, launch the software and you're ready to make movies. Note: If you did not receive one or more of the contents listed above inside the Dual-Link Cardbus package, please contact the vendor you purchased it from or contact ADS directly. Step 1: Driver Installation Step 2: Hardware Installation - Dual-Link Cardbus card Hardware install - Dual-Link Cardbus card Driver install Step 3: Connecting Devices Step 1 Locate your Notebook's open Cardbus port and place the card into the slot as you see in Fig. Once you have installed the camcorder drivers you are ready to connect your camcorder to the Dual-Link Cardbus. [. . . ] Follow these steps to ensure that the operating system recognizes your camcorder and you are familiar with the camcorder driver your system is using. Many camcorders do not have enough power when running from the battery. Connect the DV Cable supplied with the Dual Link to any available port on the Dual Link card and your digital camcorder. Your Camcorder will be recognized, as a new device by Windows and the camcorder driver will be loaded. In some cases Windows may ask for the Windows 98, WinME, WinXP or Win2000 CD to load other needed files. If you are using Win98 your camcorder will appear as "1394 DV Camcorder" appears under "Sound, Video and Game Controllers". If you are using Win98SE, WinMe, WinXP or Win2000 your camcorder will appear in Device Manager under "Imaging Device" and will be listed as a "DV camera or VCR". You can also connect Firewire drives/drive kits, Firewire webcams and any other Firewire device to the Dual-Link Cardbus card. Make sure your camcorder is turned on to VTR/ VCR MODE and connected to the Dual-Link Cardbus at this time. We are constantly adding more information to the Online Help section of our website. If there is no RMA number on the package or the RMA number has expired, the shipment will be refused. Replacement product cannot be shipped to you until the defective product has been received by ADS. Once the product is received at the factory it will be tested and then repaired or replaced. (ADS) warrants this product against defects in material and workmanship for a period of One (1) year from the date of original purchase from ADS or an authorized ADS dealer. This warranty applies only to the original purchase of the product and is not transferable. This warranty does not cover any incompatibilities due to the user's computer, hardware, software or other related system configuration in which the product interfaces. Proof of purchase will be required before any warranty consideration by ADS occurs. This warranty does not cover any damage caused by negligence, non-authorized modifications, or parts installed without prior written permission from ADS. This warranty does not apply if the product has been damaged by accident, abuse, or misapplication, nor as a result of service to the product by anyone other than ADS. If your ADS product is not in working order, your only recourse is repair or warranty replacement, as described above. [. . . ] This warranty does not apply if the product has been damaged by accident, abuse, or misapplication, nor as a result of service to the product by anyone other than ADS. If your ADS product is not in working order, your only recourse is repair or warranty replacement, as described above. Be liable for consequential damages, including but not limited to any lost savings, lost profits, or any other damages, caused by the use of any ADS Technologies, Inc. This includes damage to property and, to the extent permitted by law, damages for personal injury. [. . . ]