Detailed instructions for use are in the User's Guide.
[. . . ] Phone 1-800-ALPINE-1 (1-800-257-4631) ALPINE ELECTRONICS OF CANADA, INC. 777 Supertest Road, Toronto, Ontario M3J 2M9, Canada Phone 1-800-ALPINE-1 (1-800-257-4631)
ALPINE ELECTRONICS OF AUSTRALIA PTY. 161-165 Princes Highway, Hallam Victoria 3803, Australia Phone 03-8787-1200 ALPINE ELECTRONICS GmbH Frankfurter Ring 117, 80807 München, Germany Phone 089-32 42 640 ALPINE ELECTRONICS OF U. K. 50016, 95945 Roissy Charles de Gaulle Cedex, France Phone 01-48638989
ALPINE ITALIA S. p. A. [. . . ] Turn the Rotary encoder again to set "dd" (Date), then press MODE again.
You can input TV/video sound by connecting an optional Ai-NET/RCA Interface cable (KCA-121B) or Versatile Link Terminal (KCA-410C) to this component. Press MODE when AUX IN is set to ON, and select the AUX Name mode by pressing or , then press MODE. · Via KCA-410C, up to 2 external devices with RCA output can be connected. In this case, press SOURCE/POWER to select AUX mode and then press BAND to select your desired device.
Setting the Clock Display (Clock Mode)
AM (Before noon) 12:00 (12-hour) (Initial setting) / 00:00 (24-hour)
You can select the clock display type, 12-hour or 24-hour, depending on your preference.
Setting the External Digital Input
Digital AUX ON / Digital AUX OFF (Initial setting)
Turning the Clock Display ON/OFF
Clock ON (Initial Setting) / Clock OFF
When an ALPINE Ai-NET compatible digital audio processor (PXA-H701) and a DVD player (DVE-5207) not compatible with Ai-NET are connected, set Digital AUX to ON to enjoy 5. 1-channel surround sound. · Press SOURCE/POWER, and select the D. AUX mode, and adjust the volume, etc. · Depending on the connected audio processor, DVD player sound may continue to be output, even though the source is changed to another one. If this occurs, set the DVD player's power to OFF.
When ON is set, the time always appears in the lower left of the display.
Playing MP3/WMA Data (Play Mode)
CD-DA (Initial setting) / CDDA&MP3/WMA
This product can playback CDs containing both CD and MP3/WMA data. However, in some situations (some enhanced CDs), playback may be difficult. For these special cases, you can select playback of a single session only, containing the CD data. When a disc contains both CD or the MP3/WMA data, playback starts from the CD data portion of the disc.
CD-DA :
Connecting to an External Amplifier
Power IC ON (Initial setting) / Power IC OFF
When an external amplifier is connected, sound quality can be improved by stopping the power supply of the built-in amplifier.
Power IC OFF : Use this mode when the front and rear preamplifier of the unit are used to drive an external amplifier connected to the speakers. In this setting, the head unit's internal amplifier has no output to drive speakers. While displaying "RADIO ID" as shown above, Demonstration (page 18) become nonfunctional.
Receiving Channels with the SAT Radio Receiver (Optional)
About SAT Radio Satellite Radio* is the next generation of audio entertainment, with over 100 digital audio channels. For a small monthly fee, subscribers can hear crystal-clear music, sports, news and talk, coast-to-coast via satellite. For more information, visit XM's website at www. xmradio. com. , or SIRIUS' website at www. sirius. com. To receive SAT Radio, the separately sold XMDirectTM or SIRIUS Satellite Radio Tuner and an appropriate Ai-NET Interface Adapter will be required. * XM and its corresponding logos are trademarks of XM Satellite Radio Inc. * SIRIUS and its corresponding logos are trademarks of SIRIUS Satellite Radio Inc. · The SAT Receiver controls on the CDA-9853 are operative only when a SAT Receiver is connected.
2 1 2
To cancel the ID number display, set the channel to other than "0. "
SIRIUS: While receving a SAT Radio band, press to select channel "255" for SIRIUS. appears in the display.
Category Name Channel No. /Channel Name ID No. ID No.
*
Composer Name ID No.
*
Channel No. /Channel Name Calendar/Clock
(Blank) (Blank)
Category Name Channel No. /Channel Name
1 2
3
Press SOURCE/POWER to select SAT Radio mode. Press BAND to select between one of the three SAT Radio Preset Bands.
Each press changes the band: XM mode: XM1 XM 2 XM 3 XM1 SIRIUS 3 SIRIUS 1
To cancel the ID number display, set the channel to other than "255".
· You cannot use "O, " "S, " "I, " or "F" for the ID Number (XM radio Receiver only). · You can check the ID number printed on a label on your third party, SAT Radio Receiver package. [. . . ] If swallowed, consult a physician immediately.
DO NOT INSTALL IN LOCATIONS WHICH MIGHT HINDER VEHICLE OPERATION, SUCH AS THE STEERING WHEEL OR GEARSHIFT.
Doing so may obstruct forward vision or hamper movement etc. and results in serious accident.
DO NOT ALLOW CABLES TO BECOME ENTANGLED IN SURROUNDING OBJECTS.
Arrange wiring and cables in compliance with the manual to prevent obstructions when driving. Cables or wiring that obstruct or hang up on places such as the steering wheel, gear lever, brake pedals, etc. can be extremely hazardous.
IMPORTANT Please record the serial number of your unit in the space provided below and keep it as a permanent record. [. . . ]