User manual AMX MVP-TDS TABLETOP DOCKING STATION
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual AMX MVP-TDS TABLETOP DOCKING STATION. We hope that this AMX MVP-TDS TABLETOP DOCKING STATION user guide will be useful to you.
Manual abstract: user guide AMX MVP-TDS TABLETOP DOCKING STATION
Detailed instructions for use are in the User's Guide.
[. . . ] Operation/Reference Guide
MVP-TDS
Table Docking Station
for MVP-7500/8400 Modero® ViewPoint® Wireless Touch Panels
Touch Panels & Accessories
Last Revised: 10/06/2006
AMX Limited Warranty and Disclaimer
AMX warrants its products to be free of defects in material and workmanship under normal use for three (3) years from the date of purchase from AMX, with the following exceptions: · · · Electroluminescent and LCD Control Panels are warranted for three (3) years, except for the display and touch overlay components that are warranted for a period of one (1) year. Disk drive mechanisms, pan/tilt heads, power supplies, and MX Series products are warranted for a period of one (1) year. AMX Lighting products are guaranteed to switch on and off any load that is properly connected to our lighting products, as long as the AMX Lighting products are under warranty. AMX does guarantee the control of dimmable loads that are properly connected to our lighting products. [. . . ] Attach a keyboard or mouse using the docking station's rear USB ports. This connection facilitates surfing the Web via the G4 Computer Control application. This feature requires that the code must be entered on the panel (via the on-screen security/Password keypad) before it can be removed from the docking station. The following table lists the specifications for the MVP-TDS Table Top Docking Station.
Specifications
MVP-TDS Specifications
Dimensions (HWD): Power Requirements: · Fully raised: 7. 49" x 7. 00" x 9. 83" (19. 02 cm x 17. 78 cm x 25. 00 cm) · Fully lowered: 4. 27" x 7. 00" x 9. 83" (10. 80 cm x 17. 78 cm x 25. 00 cm) · Stand-alone with no batteries: 0. 1 A @ 12 VDC · Stand-alone charging two batteries: 2. 1 A @ 12 VDC · With no batteries and charging a connected MVP panel's two internal batteries: 3. 3 A @ 12 VDC · With two batteries and charging a connected MVP panel's two internal batteries: 3. 3 A @ 12 VDC
MVP-TDS Table Docking Station for MVP Panels
1
MVP-TDS Table Top Docking Station
MVP-TDS Specifications (Cont. )
Weight: Charging Features: Front Panel Components: · Stand-alone: 3. 38 lbs (1. 53 kg) · With two batteries: 4. 18 lbs (1. 90 kg) · Two-Bays: Simultaneous Charging · Charge time for two depleted batteries ~ 5 hours · Electromagnet · MVP Interface Connector Pins: Provides both communication and power between the MVP and the MVP-TDS. · MVP Support Cradle: This cradle supports a MVP panel and allows a user to angle the MVP LCD. · LEDs (blue): - Left LED indicates battery status in either the MVP-TDS or MVP - Right LED indicates communication between the MVP-TDS and MVP · Security Release pushbutton: Toggles an on-screen keypad for entering a security code (password). If security is enabled, a valid password must be entered before the MVP can be removed from the TDS. Rear Panel Components: · Battery Compartment: Houses up to two MVP-BP batteries. · USB Connectors: Two type A USB ports connect an external keyboard and mouse device for use with the G4 Computer Control application. · Power Connector: 2. 1 mm barrel-style power jack - connects to a PS4. 4 power supply connector. Operating/Storage Environments: · Operating Temperature: 0° C (32° F) to 40° C (104° F) · Operating Humidity: 20% - 85% RH · Storage Temperature: -20° C (-4° F) to 60° C (140° F) · Storage Humidity: 5% - 85% RH
MVP-TDS docking station connectors
FIG. 2 shows the layout of the connectors on the rear of the MVP-TDS.
Battery Compartment 1 Keyboard/Mouse USB Connectors Battery Compartment 2
12VDC
KEYBOARD/ MOUSE
KEYBOARD/ MOUSE
PWR
PWR connector (for use with PS4. 4 power supply) FIG. 2 Connector layout on the rear of the MVP-TDS
2
MVP-TDS Table Docking Station for MVP Panels
MVP-TDS Table Top Docking Station
MVP-TDS LED Indicators
The two LED indicators indicate the battery and communication status:
LED Pattern Indicators for the MVP-TDS
LED TDS only Solid Bright Flashing Bright (Slow) Flashing Bright (Fast) Solid Dim Left - Battery Status MVP in Cradle MVP panel is docked and communicating N/A MVP panel is docked but not communicating MVP panel is NOT docked and NOT communicating TDS batteries are fully charged MVP batteries are fully charged TDS batteries are charging N/A TDS receiving power but contains no batteries in cradle MVP batteries are charging N/A No batteries within the MVP Right - Comm. 3 gives the pin numbering and function information for the docking stations
1 - Data - Panel Detect IN 2 - Ground 3 - not used 4 - Ground 5 - not used 6 - Ground 7 - not used 8 - not used 9 - not used 10 - DC Power 11 - Data - Receive 12 - DC Power 13 - Data - Transmit 14 - DC Power 15 - Data - USB Device D16 - Data - Cradle Detect 17 - Data - USB Device D+ 18 - Data - Panel Detect OUT FIG. 3 MVP-TDS Connector Pin locations and Pinout function
2 1 17 18
Connecting a Power Supply
The MVP-TDS uses a PS4. 4 power supply (included with the MVP) to indirectly provide power to the MVP panel, while charging internal batteries.
Static electricity can damage electronic circuitry. After the panel splash-screen disappears:
If a USB mouse has been connected, a mouse cursor appears on the panel screen and its location corresponds to the mouse cursor position sent by the external USB mouse. If a USB keyboard has been connected, only on-screen keyboards and keypads will reflect any external keystrokes sent from the external USB keyboard. To be detected by the docking station, USB input devices (keyboard / mouse) must be plugged into the docking station before it is powered-up. The docking station will not detect USB input devices until the unit cycles power.
4
MVP-TDS Table Docking Station for MVP Panels
MVP-TDS Table Top Docking Station
Securing an MVP Panel to an MVP-TDS
The MVP will not be able to communicate with or receive power from the MVP-TDS without a proper connection.
1. Provide power to the MVP-TDS (refer to the Powering the MVP-TDS section on page 3). Place the MVP on the support cradle so that the alignment pins on the TDS fit into the matching holes on the bottom of the MVP. Once proper alignment is verified, gently angle back the MVP until the rear of the panel makes contact with the electromagnet. [. . . ] Verify you have downloaded the latest firmware file from www. amx. com and then save the Kit file to your computer.
Step 2: Upgrade the Docking Station firmware via USB 1. Prepare NetLinx Studio for communication to the panel via a Virtual Master.
Refer to the MVP-7500/8400 Operation/Reference Guide (available online at www. amx. com) for information on configuring communications on the panel.
3. After the Communication Verification dialog window verifies active communication between the Virtual Master and the panel, click the OnLine Tree tab in the Workspace window to view the devices on the Virtual System. Right-click on the System entry and select Refresh System to re-populate the list. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE AMX MVP-TDS TABLETOP DOCKING STATION
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual AMX MVP-TDS TABLETOP DOCKING STATION will begin.