User manual AMX RDC-DC RADIA CONTROL CARD, 6 CHANNEL DIMMER-SINGLE PHASE
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual AMX RDC-DC RADIA CONTROL CARD, 6 CHANNEL DIMMER-SINGLE PHASE. We hope that this AMX RDC-DC RADIA CONTROL CARD, 6 CHANNEL DIMMER-SINGLE PHASE user guide will be useful to you.
Manual abstract: user guide AMX RDC-DC RADIA CONTROL CARD, 6 CHANNEL DIMMER-SINGLE PHASE
Detailed instructions for use are in the User's Guide.
[. . . ] Installation Sheet
RDC-DC Control Card (120, 240, or 277 VAC)
The RDC-DC 6-Channel Control Card module controls up to six dimmable channels with six satellite connectors (for RDM series dimmer or switching modules). [. . . ] 1 RDC-DC control card Pin 4 (GND) Pin 3 (RLY) Pin 2 (DIM) Pin 1 (+12 V) RDC-DC 4-pin module connector
Connecting AXlink
Connect the 4-pin captive-wire AXlink from the RDC-DC to the Central Controller for AXlink control of the dimming system.
PWR AXP AXM GND (optional) PWR AXP AXM GND
Central Controller
RDC-DC UL and C-UL Ratings:
Line Input · 120 VAC, 2W+G, 1Ø, 50/60 Hz, 50 mA · 240 VAC, 2W+G, 1Ø, 50/60 Hz, 25 mA · 277 VAC, 2W+G, 1Ø, 50/60 Hz, 22 mA Control Input: · AXlink · PROlink · Eight dry closures Control Output: · Six control channels · Max. 3 AXlink wiring
Connecting PROlink:
Connect the orange 4-pin captive-wire PROlink connector from the RDCDC to a PRO-DP8 PROlink wall panel.
PRO-DP8 +12 PR+ PRGND FIG. 4 PROlink wiring Pack 1 Pack 2 +12 PR+ PRGND
Connecting Dry Closures
Use the 8 (+ common) dry closures with a WPD8 eight-button wall panel.
1 2 3 4 5 6 7 8 COM Each contact (1 - 8) is preprogrammed with a default preset. Refer to the AMX Lighting Control System instruction manual for details on dry closure default presets and recording new presets.
Specifications:
· · · · · · · · Dimensions (HW): 10. 0" x 2. 75" (254. 0 mm x 69. 85 mm) 12 VDC power (optional) Torque terminals to 20 in-lbs. wire size: 10 AWG (4 mm²) Wire stripping length: 0. 28" (7 mm) Weight: 1. 2 lbs. (0. 54 kg) Control current: 300 mA for six ports RESET button: By pressing the Reset button, located on the RDC-DC circuit board, it is possible to restart the processor without having to
Button/Jumper Information:
FIG. 5 Dry closures connection
Each contact closure connection (1 - 8) is pre-programmed with a default preset. The table below shows the default presets for each contact closure.
Dry Closure Default Presets
Contact Closure 1 2 3 4 5 6 7 8 Default Function Channel 1 at 100% in 1 second Channel 2 at 100% in 1 second Channel 3 at 100% in 1 second Channel 4 at 100% in 1 second Channel 5 at 100% in 1 second Channel 6 at 100% in 1 second Pack on (channels 1-6) Pack off (channels 1-6 All other channels are undefined.
Setting AXlink and PROlink Address Numbers:
AXlink Address PROlink Address Test
Set the AXlink address number (1-255) for the RDC-DC. [. . . ] 3000 research drive, richardson, TX 75082 USA · 469. 624. 8000 · 800. 222. 0193 · fax 469. 624. 7153 · technical support 800. 932. 6993 [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE AMX RDC-DC RADIA CONTROL CARD, 6 CHANNEL DIMMER-SINGLE PHASE
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual AMX RDC-DC RADIA CONTROL CARD, 6 CHANNEL DIMMER-SINGLE PHASE will begin.