User manual ART CABLECOP

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual ART CABLECOP. We hope that this ART CABLECOP user guide will be useful to you.


ART CABLECOP : Download the complete user guide (51 Ko)

Manual abstract: user guide ART CABLECOP

Detailed instructions for use are in the User's Guide.

[. . . ] ART cessories March 2003 TM Creative audio solutions in cool little boxes. CableCOP Cable Tester There are several types of cables used widely in pro audio ­ mic cables and patch cords with 2 or 3 conductors, instrument cables with 2 conductors, basic speaker cables with 2 conductors and MIDI cables comprised of DIN5 connectors using 2 conductors. The CableCOP features a full selection of standard pro audio connectors for testing all such cables. [. . . ] If no LEDs illuminate, either the cable is totally non-functional or the battery is dead. If only the left LED illuminates and it's a 2-conductor cable, the cable has an open tip connection in one or both of the plugs. If it is a 3conductor cable, the tip and ring on a 1/4" TRS plug, pins 2 and 3 on an XLR, pin number 5 on a DIN5 connector, it needs soldering. If only the middle LED illuminates and it's a 2-conductor cable, one or both ground connections need soldering on 1/4" or RCA plugs. If it is a 3-conductor cable, the ground and ring on a TRS, or pins 1 and 3 on an XLR may need soldering. If only the right LED illuminates and it is a 3-conductor cable (this LED should never illuminate with a 2-conductor cable), the tip and sleeve of a 1/4" TRS, or pins 1 & 2 on an XLR, or pin 4 on a DIN5 plug needs soldering. If both the left and center LEDs illuminate and it's a 2-conductor cable, it's OK. If it's a 3-conductor cable, you have two leads wired out-of-phase. They would be tip and ring in a 1/4" TRS plug, or pin 2 and 3 in an XLR. If all 3 LEDs illuminate with a 3-conductor cable, it's OK. Specifications: · The CableCOP helps to test all basic types of cables quickly and easily, even with a combination of different ends. [. . . ] · The right LED indicates pin 3 on male or female XLRs, pin 5 on DIN5 (MIDI) plugs or the ring on TRS 1/4" plugs. · Dimensions: 4. 25 x 3 x 1. 5 inches (180 mm x 76 mm x 40 mm) · Weight: 1 lb (454 g) 90 DAY WARRANTY DESIGNED & DISTRIBUTED BY: APPLIED RESEARCH AND TECHNOLOGY · 215 Tremont Street · Rochester, New York 14608 · USA For Customer Service, please call: 585. 436. 2720 · Email: cserve@artproaudio. com · www. artproaudio. com · ART-ARTcs-03/03 [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE ART CABLECOP




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ART CABLECOP will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.