User manual AT&T E2715B

[. . . ] 91-000272-010-000_E2715B&E1215B_R0. qxd 2/23/2005 5:37 PM Page 1 User Manual (Part 2) 2. 4 GHz Cordless Telephone E2715B/E1215B with Caller ID & Call Waiting 91-000272-010-000_E2715B&E1215B_R0. qxd 2/23/2005 5:37 PM Page 2 You must install and charge battery before using the telephone. STOP! See page 7 for easy instructions. For customer service or product information, visit our web site at Please also read Important Product Information Enclosed in product package. www. telephones. att. com or call 1-800-222-3111. CAUTION: To reduce the risk of fire or injury to persons or damage to the telephone, read and follow these instructions carefully: · · · · · · Use only replacement battery 2419 (Part number 80-5543-00-00) or battery 2420 (SKU 00578. Released electrolyte is corrosive and may cause damage to the eyes or skin. Exercise care in handling batteries in order not to short the battery with conducting materials such as rings, bracelets, and keys. Charge the battery provided with or identified for use with this product only in accordance with the instructions and limitations specified in this manual. [. . . ] Call Forward · The first handset (HS1) can forward an external call to the other handset (HS2) by pressing and holding the INTERCOM key. · To answer the call, HS2 can press PHONE, SPEAKER or any of the dial pad keys. NOTE: If HS2 does not respond within 30 seconds, the external call will be returned to HS1 and its display will show CALL BACK. If the returned call is not answered within 30 seconds, the external call will end automatically. Call Transfer · HS1 can transfer an external call to HS2, by pressing the INTERCOM key. NOTE: The external call is put on hold automatically. · HS2 will ring, showing an intercom call. · Press PHONE, INTERCOM, SPEAKER or any dial pad key on HS2 to answer the intercom call. NOTE: Press INTERCOM on HS1 to switch back and forth between the intercom and outside call. · HS1 and HS2 can discuss the external call. CALL TRANSFERRED will display on HS1. NOTE: If there is no answer on HS2 within approximately 1. 5 minutes, HS1 will automatically reconnect to the external call. 13 91-000272-010-000_E2715B&E1215B_R0. qxd 2/23/2005 5:38 PM Page 14 Telephone Operation Highlighted menu item Handset settings At the feature menu you can change settings to customize how the telephone works. Press MENU, then use the ^V buttons to scroll to the feature you want to change. As you scroll through the menu, the top menu item is always highlighted with a > symbol. Press OFF at any time to cancel an operation, back up to the previous menu, or exit the menu display. Ringer volume > DIRECTORY CALL LOG RINGER VOLUME At this menu you can set a default ring volume level (1-6), or turn the ringer off. Use the ^V buttons to hear an example of each volume level, then press SELECT to select the one you prefer. UME OUTSIDE TONE 1 Ringer volume can also be adjusted by pressing VOLon the side of the handset during incoming ringing. Ringer tone This feature allows you to choose one of 10 ringing tones. Use the ^V buttons to hear an example of each ringer tone, then press SELECT to select the one you prefer. KEY TONE ON Key tone The handset is factory programmed to beep at each key press. Use the ^V buttons to select ON or OFF, then press SELECT to save your preference. 14 91-000272-010-000_E2715B&E1215B_R0. qxd 2/23/2005 5:38 PM Page 15 Telephone Operation Handset settings Handset name HANDSET NAME AT&T_ At this menu you can customize the name that appears on the handset screen when the phone is idle. Press DELETE to erase letters, then replace them with a name of your preference, up to 16 characters long (see page 17 to enter letters). Language LANGUAGE ENGLISH At this menu you can select the language used in all menus and screen displays. Use the ^V buttons to select English, Spanish or French, then press SELECT to save your preference. Dial Type DIAL TYPE TONE At this menu you can choose Tone or Pulse dialing. Change this to PULSE only if you do not have touch-tone dialing service. Use the ^V buttons to select TONE or PULSE, then press SELECT to save your preference. CLR Voice Mail If you subscribe to voice mail services provided by your local telephone company, you will receive a text message on the handset when you have new voice mail. To manually remove the voice mail message on the display: · Press MENU. · Press the ^ or V button to highlight CLR VOICE MAIL is selected. · Press SELECT again to remove the displayed message, or press OFF to exit. NOTE: This only turns off the displayed message on the handset, it does not delete your voice mail message(s). >DIRECTORY CALL LOG >CLR VOICE MAIL DIAL TYPE TURN INDICATOR OFF? >CLR VOICE MAIL DIAL TYPE 15 91-000272-010-000_E2715B&E1215B_R0. qxd 2/23/2005 5:38 PM Page 16 Phone book Shared phone book directory Pat Williams 555-1234 The phone book directory is stored in the base, and is shared by both handsets. [. . . ] · Press and hold DELETE to delete all entries from your call log. When asked to confirm, press SELECT to clear your call log of all entries, or OFF to exit and leave all call log entries intact. If the name or number is not provided, you will be prompted to enter them. 21 91-000272-010-000_E2715B&E1215B_R0. qxd 2/23/2005 5:38 PM Page 22 Appendix Screen icons, indicator lights & tones Handset screen icons & alert tones Screen icons Speakerphone in use. Ringer off. AT&T MUTE NEW 11/23 Battery charging (animated display). [. . . ]