Detailed instructions for use are in the User's Guide.
[. . . ] Tuner LCD Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Switch to Radio Tuner source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Select FM/AM Band . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Auto Tuning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] When the parking brake inhibit is on, the front monitor displays "Parking Is On", preventing the driver from watching content while driving. Rear video screens are not affected.
Reverse Driving Use
If the rear-view video camera is connected, the unit is on, and the monitor is stationed inside the main compartment of the unit, the monitor automatically moves into the viewing position and switches to CAMERA mode upon reverse driving. When the reverse driving stops, the monitor returns to the main storage compartment. If the monitor is in display mode, the monitor automatically switches to CAMERA mode upon reverse driving. When the reverse driving stops, the monitor return to its original input mode.
·
Image Setting
Video Output Format Table 3 shows the video output format for each playing source. Table 3: Video Output Formats Playing Source
TUNER DVD AUX IN CAMERA
·
Monitor Movement Mechanism
If an obstruction occurs in the monitor path, the following protective measurements can be executed to prevent damage to the mechanism or monitor: Table 4: Monitor Protective Measures
Obstruction Monitor loading out horizontally Monitor loading in horizontally Monitor loading out vertically Monitor loading in vertically Self Protection Monitor is automatically loaded into unit Unit stops at obstruction point Unit stops at obstruction point Unit stops at obstruction point OPEN Button Pressed Monitor fully extended horizontally Monitor fully extended horizontally Monitor swivels back to the unit Monitor swivels back to the unit Power Reconnected Monitor is automatically loaded into unit Monitor is automatically loaded into unit Monitor swivels back to the unit Monitor swivels back to the unit
Video Output Format
RGB Mode RGB Mode CVBS Mode CVBS Mode
Monitor Tilt Angle Adjustment
A known characteristic of LCD panels is the quality of the display in relationship to the viewing angle. The monitor angle can be adjusted for optimum viewing using one of the following methods: Step by Step Angle Adjustment Press the ( ) or ( ) button (3, 4) on the monitor frame to adjust the tilt angle of the screen one step at a time. Continuous Angle Adjustment Press and hold the ( ) or ( ) button (3, 4) on the monitor frame to adjust the tilt angle in a continuous motion.
*CVBS Composite Video Baseband Signal Adjustable Parameters While in DVD or TUNER mode, the only parameter that can be adjusted is brightness (BRIGHT). To access "PICTURE", "COLOR", "CONTRAST", and "TINT" you must be in AUX or CAMERA mode. Enter Picture Quality Setting mode: Press the PIC button (24) on the remote or press and
Aspect Ratio
Press the WIDE button (28) on the remote control or WIDE/ PICTURE button (2) on the monitor to adjust the aspect ratio as follows:
After the protective procedure is executed, normal operation is resumed by pressing the OPEN button (2) or disconnecting and reconnecting the power.
10
VME 9314 TS OPERATING INSTRUCTIONS
Power On / Off
Press the /MUTE button (1) to turn the unit on. The buttons on the front of the unit light up and "WELCOME" appears briefly in the LCD panel (17), followed by the current mode status. Enter the option field for the feature you want to adjust by pressing the button (18) on the remote or by pressing the ENTER (joystick) button (20) on the unit. A submenu appears in a second row with the selected option highlighted in light blue. Select a new value by pressing the or buttons (14, 22) on the remote control or the or buttons (18, 19) on the joystick. Confirm your selection by pressing the , , or buttons (14, 17, 19) on the remote control, or the or button (16, 17) on the joystick. Table 7: General Setup Menu Features DIRECTION BUTTONS Setting
Radio
Adjusting the Clock Method 1 TFT screen open: 1. Press the or buttons (14, 22) on the remote control or the or buttons (18, 19) on the joystick to move the cursor to the "Hour" or "Min" position. Press the , or buttons (17, 19) on the remote control or the or buttons (16, 17) on the joystick to adjust the hour or minutes. Press and hold the DISP button (5) until the clock flashes in the LCD display. Press the or buttons (18, 19) on the joystick to move the cursor to the "Hour" or "Min" position. Press the or buttons (16, 17) on the joystick to adjust the hour or minutes. , then
General Setup Menu
Accessing the General Setup Menu To access the "GENERAL SETUP" Menu, press the direction buttons on the joystick (16, 17, 18, 19) or remote control (14, 17, 18, 19, 22) to highlight "GENERAL SETUP" in green.
3.
4.
Method 2 TFT screen closed: 1. [. . . ] Use the numeric keypad (29) on the remote control to access files directly.
20
VME 9314 TS TROUBLESHOOTING
Table 18: Troubleshooting Problem
GENERAL Unit will not power on Radio Fuse blown Car battery fuse blown Illegal operation Remote control does not function Battery depleted Battery installed incorrectly No/low audio output Improper audio output connection Volume set too low Improper "MUTE" connection Speakers damaged Heavily biased volume balance Speaker wiring is in contact with metal part of car Poor sound quality or distortion Pirated disc is in use Speaker power rating not compatible with unit Speaker is shorted Tel-Mute malfunction Unit resets itself when engine is off TFT MONITOR Monitor does not open automatically No image TFT Auto Open is turned off Incorrect connection to parking brake wire PRK SW is activated and parking brake is not engaged Flashing image or interference appears on screen DVD is not compatible with current TV system settings Improper video signal connections Prolonged image or improper height/width ratio display Monitor stops at incorrect position TUNER Weak station searching Auto antenna is not fully extended Auto antenna not properly connected LOCAL function is activated Cannot insert disc Disc already inside unit Connect the auto antenna control cable properly Connect the auto antenna control cable properly Turn LOCAL function off Eject current disc and insert new one Improper aspect ratio setup Moving path is blocked Turn TFT Auto Open on Check wiring and correct Stop vehicle is safe place and apply parking brake Change setup to accommodate disc Check wiring and correct Use correct aspect ratio setting Press OPEN key to restart monitor movement "MUTE" wire is grounded Incorrect connection between ACC and positive battery wire Install new fuse with correct rating Install new fuse with correct rating Press the RESET button located in the bottom right corner of the front panel Replace battery with new one Remove battery and install correctly Check wiring and correct Increase volume level Review wiring diagram and check "MUTE" connection Replace speakers Adjust the channel balance to the center position Insulate all speaker wiring connections Use original copy Connect proper speakers Check speaker contact Check that "MUTE" connection is not grounded and that it's properly insulated Check wiring and correct
Cause
Corrective Action
21
VME 9314 TS
Table 18: Troubleshooting Problem
Disc does not play back
Cause
Disc is warped or scratched Disc is dirty or wet Laser pickup is dirty Incompatible disc is used Disc rating exceeds Parental Lock rating limit Disc region code is not compatible with unit Disc is inserted upside down Use disc in good condition Clean disc with soft cloth Clean laser pickup with cleaning disc Use compatible disc
Corrective Action
Change Parental Lock settings to lower restriction Use disc with proper region code Insert disc with label side up Use original disc
Image blurred, distorted, or dark PBC cannot be used during VCD playback No repeat or searching while playing VCD MP3 Interruption occurred during playback
Disc is illegally copied PCB is not available on the disc PCB is on
Turn PCB off
Disc is dirty or scratched File is damaged/bad recording
Clean disc or replace Recreate disc with good files
Incorrect playback message displayed
Message is longer than LCD can display
Error Messages
Table 19: Error Messages Message Displayed
Loading No Disc Disc is being read Disc is dirty Disc is upside down Disc not present in loading compartment Bad Disc Disc is dirty Disc is upside down Unknown disc Region Error Error Disc format is not compatible with this unit DVD is not compatible with region code of unit illegal mechanism operation Press EJECT key for 5 seconds to reset loading mechanism Clean disc with soft cloth Insert disc with label side up Insert disc Clean disc with soft cloth Insert disc with label side up
Cause
Corrective Action
Care and Maintenance
1. Use only a clean silicone cloth and neutral detergent to clean the front panel or monitor. A rough cloth and nonneutral detergent (such as alcohol) may result in scratching or discoloration. If the temperature inside the player gets too hot, a protective circuit automatically stops play of the disc. [. . . ]