User manual AXIS UPRUN

[. . . ] Instant uP & Running AXIS StorPoint NAS 100 TM AXIS StorPoint CD E100 TM CD inside Getting Your AXIS StorPointTM Up & Running 1) 2) Connect your AXIS StorPoint Server to the network and turn it on. Ethernet Address - Serial Number You will need to know the Ethernet address of your AXIS StorPoint Server. [. . . ] Note: The new IP address must be set within 30 minutes after restarting your AXIS StorPoint Server. 4a) Windows Networks - Web Browser In most Windows environments, you can use a standard Web browser to set the IP address. Enter the following in the address/location field: <nnnnnn> are the last six digits of the serial number, e. g. 3E5207 for the serial number 00408C3E5207 <ip3_ ip4> the last two groups of the desired IP address, e. g. 253_80 for the IP address 192. 16. 253. 80 The AXIS StorPoint Server retrieves the first two groups of the new IP address from the subnet. Example The serial number of your AXIS StorPoint Server is 00408C3E5207 and you want to assign it the IP address 192. 16. 253. 80. Enter 3E5207_253_80 in the location/ address field. Note: If the connection cannot be established, set the IP address using AXIS IP Installer described in 4b. 4b) NetWare, All Windows Platforms - AXIS IP Installer In NetWare and on all Windows platforms, you can set the IP address using the AXIS IP Installer software utility which is available on the "AXIS Storage Online CD" and on the Axis Web site www. axis. com 1. Select the serial number of your AXIS StorPoint server in this list. 2. Enter the desired IP address in this field. 4c) UNIX and OS/2 - ARP In UNIX and OS/2, you can set the IP address using the arp -s command: arp -s <IP address> <Ethernet address> temp ping <IP address> Example arp -s 192. 16. 253. 80 00:40:8C:3E:52:07 temp ping 192. 16. 253. 80 Note: The arp -s command may vary from system to system. 4d) Macintosh - Text Editor (AXIS StorPoint CD E100 only) In Macintosh, you set the IP address using a text editor: 1. From the Select a file server list, select AXIS<nnnnnn_AT> where <nnnnnn> are the last six digits of the serial number, e. g. [. . . ] You will be prompted for the Server password the first time during a session. help button admin button root pass Note: The default user name and password are root and pass. 7) For more information about setting up your AXIS StorPoint Server, refer to the "User's Manual" and other online information available on the "AXIS Storage Online CD". [. . . ]