Detailed instructions for use are in the User's Guide.
[. . . ] ®
Nexia ® CS DSP Conference System
Nexia CS is a digital signal processor with 10 mic/line inputs and 6 mic/line outputs. Intended for a variety of conferencing applications such as boardrooms, courtrooms, and council chambers, Nexia CS includes a broad selection of audio components, routing options, and signal processing. [. . . ] The DSP conference system shall be CE marked, UL listed, and shall incorporate AES48-2005 Grounding & EMC practices. The DSP conference system shall be compliant with EU Directive 2002/95/EC, the RoHS directive. The DSP conference system shall be Nexia® CS.
Biamp Systems, 10074 S. W. Arctic Drive, Beaverton, Oregon 97005 U. S. A.
(503) 641-7287
www. biamp. com
®
Nexia ® CS SPECIFICATIONS
Frequency Response (20Hz~20kHz @ +4dBu): THD +N (20Hz~20kHz @ +4dBu): line level mic level +0/-0. 4dB < 0. 006% < 0. 05%
Nexia ® CS DSP Conference System
Maximum Output (balanced): Full Scale Output Level (six selections): Sampling Rate: A/D - D/A Converters: Phantom Power: Power Consumption (100~240VAC 50/60Hz): +24dBu -31dBu ~ +24dBu 48kHz 24-bit +48 VDC (7mA/input) 65 watts
Equivalent Input Noise (20Hz~20kHz, 66dB gain, 150 ohm): -125dBu Dynamic Range (20Hz~20kHz, 0dB): Maximum Gain (mic input to line output): > 105dB 66dB
Crosstalk (channel-to-channel @ 1kHz): Dimensions: line level input < -80dB height 1. 75 inches (45mm) mic level input < -75dB 19 inches (483mm) Nexia CS is a digital signal processor with 10 mic/line width inputs and 6 mic/line outputs. Intended for a depth 11. 15 inches (283mm) variety of conferencing applications such as boardrooms, courtrooms, and council chambers, Nexia CS Input Impedance (mic/line balanced): 8k ohms includes a broad selection of audio components, routing options, and signal processing. (3. 9kg) Weight: 8. 6 internal system design is completely user definable via PC software, and can be controlled via daVinciTM Maximum Input (mic/line balanced): +24dBu software screens, RS-232 control systems, and/or Compliance: of optional remote control devices. a variety AES48-2005 Grounding & EMC practices Input Gain Nexia systems can be created utilizing Ethernet and NexLink digital audio linking. RoHS directive 0dB ~ +66dB EU Directive 2002/95/EC, Multi-unitRange (variable): CE marked Output Impedance (balanced): 200 ohms UL listed
· 10 balanced mic/line inputs on plug-in barrier strip BIAMP SYSTEMS · Ability to select, view, and calibrate: · 6 balanced mic/line outputs on plug-in barrier strip - Mixers: standard, automatic, matrix, combiners · Ethernet port for software configuration/control - Equalizers: graphic, parametric, feedback U ·L serial port for third-party RS-232 remote control - Filters: HPF, LPF, high shelf, low shelf, all-pass · remote control bus for dedicated control panels - Crossovers: 2-Way, 3-Way and 4-way · NexLink ports for multi-unit system designs - Dynamics: leveler, comp/limiter, ducker, ANC Nexia BLOCK DIAGRAM · Nexia software for Windows® XP Professional/Vista - Routers: 2x1 ~ 32x32 · pre-configured I/O with definable processing - Delays: 0 ~ 2000 ms · mix, route, combine, EQ, delay, control, etc. RS-232 Control Control · RoHS compliance and AES grounding practices - Meters: signal present, peak, RMS Comms Bus · CE marked and UL listed - Generators: tone, pink-noise, white-noise · covered by Biamp Systems' five-year warranty
designed and assembled in the USA www. biamp. com
FEATURES Nexia CS REAR PANEL DIAGRAM
NexLink Rx Class 2 wiring Remote Control Bus serial 6 5
CAUTION
4
outputs
RISK OF ELECTRICAL SHOCK. DO NOT OPEN.
3
2
1
10
9
8
7
mic/line inputs 6 5
4
3
2
1
C
R
US
LISTED
52SJ
100-240V~ 50/60Hz 65 Watts, 1. 0 A
term
24VDC @ 0. 5A
hi lo
Ethernet
NexLink Tx
- Diagnostics: transfer function
MicroProcessor
ARCHITECTS & ENGINEERS Memory SPECIFICATION
The DSP conference system shall provide ten balanced mic/line inputs and six balanced mic/line outputs on plug-in barrier-strip connectors. [. . . ] The DSP conference system shall be Nexia® CS.
Biamp Systems, 10074 S. W. Arctic Drive, Beaverton, Oregon 97005 U. S. A.
(503) 641-7287
www. biamp. com 3Dec08 [. . . ]