Detailed instructions for use are in the User's Guide.
[. . . ] iDect_V2_IFU_master. book
Page 1
Friday, April 4, 2008
4:05 PM
USER GUIDE
iDECT V2 System
DIGITAL CORDLESS TELEPHONE
THIS EQUIPMENT IS NOT DESIGNED FOR MAKING EMERGENCY TELEPHONE CALLS WHEN THE POWER FAILS. ALTERNATIVE ARRANGEMENTS SHOULD BE MADE FOR ACCESS TO DIAL EMERGENCY SERVICES.
Ver. 4, Feb 08 (BTP)
Before operating this set, please read these instructions carefully.
iDect_V2_IFU_master. book
Page 1
Friday, April 4, 2008
4:05 PM
Important note -- emergency calls
The iDECT V2 is not designed for making emergency calls if the mains power fails. So you should make alternative arrangements for access to Emergency Services. [. . . ] If you've got new Caller Display records, "X New Call. " is shown on the display, and will only be removed from the standby screen after all new calls have been viewed. Here are some examples of Caller Display records: A call from someone whose name (Jenny) and number are stored in your Phonebook. A call from someone whose name and number are not stored in your Phonebook.
A call from someone who withheld their number by dialling 141.
A call from someone whose number is unavailable (for example, this may be an international call).
22
iDect_V2_IFU_master. book
Page 23
Friday, April 4, 2008
4:05 PM
Caller Display
To check Caller Display records
1
u
Press the Caller Display button !If there are no records the display shows List Empty.
2
:
Press the U or D button to scroll through the records
To return a call
1 2
To ring back someone who's called you: Follow steps 1 and 2 above to display the record
o
Press the PHONE button to dial the number
To store a Caller Display number in the Phonebook
1 2
Use steps 1 and 2 above to display the record Press the MENU/OK button !Display shows Enter Name: Key in a name then press the MENU/OK button !Display shows Enter Number > and the number to be stored Edit the number if required then press the MENU/OK !You will hear a long confirmation beep
M d 3M
.
4
M
Help Line: 0845 345 9677 (Local Call rate)
23
iDect_V2_IFU_master. book
Page 24
Friday, April 4, 2008
4:05 PM
Caller Display
To delete a caller display record
1 2
Use steps 1 and 2 (top of page 23) to display the record to be deleted
M d M
Press the MENU/OK button then the D button TWICE !Display shows Call List > Delete Press the MENU/OK button to confirm !You will hear a long confirmation beep and the display will return to the next caller display record
3
4
f
Press the HANG UP button to go back to standby mode
To delete all caller display records
1 2
Use steps 1 and 2 (top of page 23) to display the records
M d M M f
Press the MENU button then the D button TWICE !You will hear a long confirmation beep The display returns automatically to standby mode
3 4 5
24
iDect_V2_IFU_master. book
Page 25
Friday, April 4, 2008
4:05 PM
Using a multi-handset system
If you have an iDECT V2 multi-handset system, you already have more than one handset registered to your base unit. With two or more handsets, you can: make intercom calls from one handset to another transfer an outside call from one handset to another toggle between an outside call and an intercom call set up a three-way conference call Each handset's number (1 to 4) is shown on its display. If you try to make a call while another handset is already on the line, you'll hear Busy tone. The numbers of the available handsets will be displayed
2
.
Press the handset number you want to call. The other handset rings, and its display shows Call From: Handset 1 (if your handset is number 1). When the other handset user answers, you'll be connected and the displays will show Intercom with the number of the other handset.
To end an intercom call
!
f
On either phone, press the HANG UP button or replace the unit in the base unit or charger pod
Help Line: 0845 345 9677 (Local Call rate)
25
iDect_V2_IFU_master. book
Page 26
Friday, April 4, 2008
4:05 PM
Using a multi-handset system
To answer an intercom call
The ringing tune for intercom calls is different from that for outside calls. When someone makes an intercom call to you, your handset's display shows Call From: Handset # with the number of the handset calling you.
o , !
To transfer a call
Press the PHONE button to answer
When you're talking on an outside call (a call you've either made or answered), you can transfer it to another handset:
1
I
.
Press the INT button and the display will show Intercom and the numbers of all available handsets. If the other user does not answer, you can get back to the outside call at any time by pressing the INT button again.
2
f
Press the HANG UP button to hang up and transfer the call If you prefer, you can press HANG UP to transfer the outside call before the other handset answers your intercom call. If the user hasn't answered after 30 seconds, the outside call will come back to you and your handset will ring.
26
iDect_V2_IFU_master. book
Page 27
Friday, April 4, 2008
4:05 PM
Using a multi-handset system
To toggle between two calls !
When you have made or answered an outside call and then made an intercom call, you can toggle from one to the other, like this:
I f
Press the INT button to speak to each in turn, putting the other on hold You can transfer the outside call to the other handset by pressing HANG UP while you're connected to the intercom call If you press HANG UP while you're connected to the outside call, you'll disconnect it.
To set up a three-way conference
1 2
Make or answer an outside call
I
.
3
Press the INT button to start intercom mode then key in the number of the other handset !When the other user answers: Press and hold the INT button for one second !Display shows Conference
I
To end the conference !
f
Press the HANG UP button !You will drop out of the conference call, leaving the other user connected to the outside call.
Help Line: 0845 345 9677 (Local Call rate)
27
iDect_V2_IFU_master. book
Page 28
Friday, April 4, 2008
4:05 PM
Using a multi-handset system
New Call tone
When you are on an intercom call and an outside call comes in, you'll hear New Call tone to tell you that someone is calling you. To answer the outside call and end the intercom call: !
o
Press the PHONE button briefly ! [. . . ] Network connection This equipment is intended to be used in the UK only. Operation on other countries' PSTN termination points cannot be guaranteed.
Binatone Telecom plc operates a policy of continuous product improvement, and so reserves the right to make changes to the product and functions without notice.
Help Line: 0845 345 9677 (Local Call rate)
43
iDect_V2_IFU_master. book
Page 44
Friday, April 4, 2008
4:05 PM
Registering new handsets
The handset(s) supplied with your iDECT V2 base unit are already registered to it, so you don't need to register them. But if you've bought extra handsets separately, you'll need to register them. To register a new handset
Make sure the handset you're registering is in standby mode.
1 2 3
M d M d M
Press the MENU/OK button ! [. . . ]