User manual BOSS CAP2C
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual BOSS CAP2C. We hope that this BOSS CAP2C user guide will be useful to you.
Manual abstract: user guide BOSS CAP2C
Detailed instructions for use are in the User's Guide.
[. . . ] .
Cause/Solution
Check and make sure whether the fuse is blown, replace with the proper value if necessary. Press RESET button.
Check and make sure whether the antenna is inserted or the antenna is properly connected, if not, insert the antenna or connect it properly. Make sure the antenna is fully extended; if broken, replace the antenna with a new one. The antenna is poorly grounded, check and make sure the antenna is properly grounded at its mounting location. [. . . ] Be sure the temperature inside the vehicle is between +60 C and -10 C before turning on your unit . To enjoy optimum sound and images while playing, handle the discs as follows: Handle the disc by its edge to keep the disc clean, and do not touch the surface.
Do not use your CDs with paste residue or ink attached.
in the monitor performs the same
Do not use CDs with labels or stickers attached, which may leave a sticky residue while beginning to peel off. (Shown as the picture)
On Screen Display During radio status, keep pressing OSD to display the current mode
Note: * Press DISP on the head unit performs the same function.
8
Clean the discs with an optional cleaning cloth. (Shown as the picture)
Besides playing the discs above, the unit also can be connected to other connector. 36 5
01
Before You Start
Tuner
Listening to the radio
FM1 CH:1 87. 50MHz
09
Band Selector
During radio status, repeatedly press 3 BAND button to select bands in the following order:
FM1 FM2 FM3 AM1
Maintenance
Replacing the Fuse Make sure the amperage matches the specified value when replacing the fuses. If the fuse is blown, check the power connection and replace with a new one. In such cases, please consult to the nearest service dealer.
!
87. 50M
87. 50M 108. 00M 106. 00M
AM2
Note:
Insert the Battery Holder into the Remote Control.
90. 00M 98. 00M
* Press BAND on the head unit or BAND in the monitor performs the same function.
Manual/Automatic Tuning
1 Band Indicator
Warning
Shows which band the radio is tuned to.
Manual Tuning: Press ( or ) button on the remote control continuously to select a station downward or upward respectively. Automatic Tuning: Press and hold ( or ) button for more than 3 seconds, the radio automatically searches a station downward or upward respectively and plays when it finds a station.
Note: * Press and button on the head unit or in the monitor performs the same function.
Never use the fuse with the rated amperage more than that supplied to your unit, otherwise it will damage the unit.
Precautions on Using Lithium Battery Always keep the lithium battery beyond children s reach. Cleaning the battery with a dry cloth, to ensure its perfect connected. Secondly press GOTO button, and the monitor shows: --:--:--, input your desired time, then press ENTER.
Note:
Note:
* This function is operated by using the remote control.
* Press and on the head unit or and in the monitor perform the same function.
Selecting Tracks Fast
During MP4(AVI, MPEG4) playback, firstly press 21 to replay the current track, press 21 again to play the backward track, press to play next track. 21
Note: * Pressing and button on the head unit or also and in the monitor perform the same operation.
Menu Selector
During MP4(AVI, MPEG4) playback, firstly press 4 MENU to return to the title menu, you can select your desired chapter by press or 23 , then press 17 to play. Note: * Press in the monitor performs the same function.
06
Install the Unit
Parts List
Selecting the MP3 Track
During Mp3 mode, firstly press 2 GOTO and the TFT shows:---. Then press 23 NUMBER BUTTONS to input the Mp3 track s Number to play it, ; secondly press GOTO button, and the TFT shows : --:-- , now input the desired Number to play the current track at this point, If there are some mistakes, press 22 CLEAR to clear them.
Note:
M4x3 &M5x5 £p £p Mounting Sleeve x1 Rear Mounting Bolt x1 Harness Rubber x1
6
4 Screws Each
Selecting Tracks Fast
7
During Mp3 playback, press 27 play the backward track, Press 27 play next track.
Outer Trim Frame x 1 Connecting Wire x1 Steel Bar x 1
to to
* This function is operated by using the remote control.
Installation Method
Panel
DIN Front-Mount
Install twor M5x6 screws on both sides (left and right) of the lock hook brackets
Note: * Pressing and button on the head unit or also and in the monitor perform the same operation.
Pause the Playback
During Mp3 playback, press itch between play and stop.
Note:
to sw-
Repeat Playing
During Mp3 playback , press 15 RPT to replay the current track, press it again to cancel this function.
Note:
* Press in the monitor or performs the same function.
on the head unit
Skip backward/forward/F. F /F. REW the playback
Press 20 ( or ) on remote control to perform fast reward or fast forward.
2X 4X 8X 16X
Bend these claws outward for a tight fit, if necessary. Install the unit with four M2 2 screws Fire Wall To support the unit
* This function is operated by using the remote control. * The default setting is catalog Repeat.
Number Buttons
Press one of 23 Number Buttons(0~9) to select a track to play automatically.
Note:
Note:
* Press and on the head unit or and in the monitor perform the same function.
* This function is operated by using the remote control. * Press 22 CLEAR to clear the mistake input.
Install Outer Trim Frame
On Screen Display
Hold and press OSD button to display the current status.
Note: * Press DISP on the head unit performs the same function.
29
Stop Playing
¼ò¹ÊÅÅÖ¸ÄÏ µ¥Õϳý
to stop
12
During Mp3 playback, Press 18 the playback.
05
DVD
---Password Setup page---
Installation
Install the Unit
Installation Method
Installation using the screw holes at the sides of the unit. Select a position where the screw holes of the mounting bracket supplied with the car and the screw holes of the main unit become aligned (are fitted), and tighten the screws (see 4 at 2 places on each side). And then fasten them to the car.
Note: Outer Trim Frame 5 and Mounting Sleeve 1 are not used for installation method.
02
Password Mode
(Press
Example showing how to set password mode: (Press , or , then press ENTER)
--Password Setup Page-Password Mode On Password
--Password Setup Page-Password Mode On Password
On Off
Bracket supplied to your car
Go To Password Setup Page
Password Mode
Password
(Press
Example showing how to set load factory setting: the default password is 8888. (Press , or , then press ENTER)
Dashboard or Console
--Password Setup Page-Password Mode On Password
--Password Setup Page-Password Mode On Password
Change
Go To Password Setup Page
Change Password
Detach the Unit
1. Screw the 4 screws, pull the head unit out.
28
13
03
Common Operations
Setting the Sound Characteristics
Repeatedly press 14 SEL button to select the desired mode in the following order:
VOL TRE
DVD
---Preferences page--
05
Reset the Unit
Operating the unit for the first time or after replacing the car battery, you must reset the unit. Remove the front panel at first, and then Press 9 RESET button in the panel with a pointed object, (such as a ballpoint pen) to set the unit to initial status.
Note: * When some errors occur on the display, you can also press RESET button to resume to normal, and it will erase the clock setting and some memorized functions.
Disc Menu
BAL FAD BAS
Example showing how to set Disc Menu Language: (Press , or , then press ENTER)
(Press --Preference Page--
--Preference Page-TV Type Audio Subtitle Disc Menu Parental Default Auto Eng Eng Eng English French Spanish Chinese Japanese Korean Russian Others
After selecting the desired mode, you can adjust the current level by pressing 14 VOL buttons.
Note:
* Pressing 7 button and rotating it on the head unit also performs the same operation.
TV Type Audio Subtitle Disc Menu Parental Default Go To Preference Page
Auto Eng Eng Eng
Preferred Menu Language
* This function can only be operated by the head unit.
EQ Setting
While listening to the popular music, classic music or rock music, you can select the corresponding preset modes to adjust the sound quality perfectly by using 26 EQ button. Repeatedly keep pressing 26 EQ button to 3 choose the following modes in turn:
POP EQ OFF CLASSICAL ROCK
Turning the Unit On/Off
Press 1 PWR button to turn on the unit, press it again, the unit is still in the waiting status. [. . . ] If the disc that is inserted does not have the preferred option then the discs own preference will be used. * Regarding SETUP MENU, please refer to the following pages for more details. * Some functions varies depending on the types of models or formats of the disc. * Press 19 SETUP on the remote control or MENU on the head unit to exit the menu setup.
* This function is operated by using the remote control.
* This function only operates with DVDs featuring multi-subtitle recordings. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE BOSS CAP2C
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual BOSS CAP2C will begin.