User manual BRITAX B-SCENE
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual BRITAX B-SCENE. We hope that this BRITAX B-SCENE user guide will be useful to you.
You may also download the following manuals related to this product:
BRITAX B-SCENE INFANT CAR SEAT ADAPTER FRAME (321 ko)
Manual abstract: user guide BRITAX B-SCENE
Detailed instructions for use are in the User's Guide.
[. . . ] B-SCENETM Stroller
User Guide
IMPORTANT: To ensure your child is as safe as possible, read all instructions thoroughly before using this stroller. Store this manual for future reference.
Table of Contents Warnings. [. . . ] · Only use accessories and replacement parts approved by Britax Child Safety, Inc. · Do not lift the stroller by the arm bar of the seat when the seat is occupied. · Read and understand these instructions before using this product. To ensure proper use, store this user guide in a convenient place so it can be consulted often. Failure to follow all warnings and instructions could result in serious injury or death. · When using an infant car seat with this product, refer to the product's user guide for maximum weights and other instructions. · Do not exceed the manufacturer's maximum weight limit when using an infant car seat with this product.
3
Features
Canopy Handle. Release. Button
· Actual product may vary from images.
In the Box
Front. Wheel Seat
Rear. Wheels
Arm. Bar
Britax. Infant. Car. seat. Adapters
Stroller. Frame
Rain. Cover
5
Assembly Unfolding · Lift chassis lock lever and open the frame
· Lift handle until frame locks into upright position as shown
Front Wheel · Slide mounting pin into the housing on the frame until it locks into place
NOTE: Always make sure the front and rear wheels are locked into place and that the brake functions properly before each use 6
Assembly Rear Wheels
NOTE: Left and right wheels are marked with an L or R and are from the perspective of standing behind the stroller
· Hold in the release button in the center of the wheel and slide the mounting pin into the housing on the rear axle Arm Bar · Attaching: slide the pins into the mounts on the seat until they lock into place · Removing: push the release button on the bottom of the mounts and pull arm bar out
NOTE: Armbar or cup holders must always be used to avoid finger entrapment in the open connectors
7
Assembly Removing Front Wheel · To remove, pull the wheel release lever on the front hub until the wheel assembly releases
Removing Rear Wheels · Press and hold the release button in the center of the wheel and pull away from the wheel housing
8
Assembly Attaching the Canopy · Line up the bracket on the canopy stay with the canopy mount on the frame of the seat
· Slide the bracket onto the canopy mount until it locks into place
· Attach the six hook and loop fasteners to the back of the seat
9
Operating Instructions Parking Brake · Step on the brake pedal until the indicator window changes color
NOTE: Red indicates the brake is engaged and green indicates the brake is off
Attaching the Seat · Insert the seat locking latches into both chassis sockets
· Push down until an audible click is heard
NOTE: Seat attaches forward or rear facing
10
Operating Instructions · Pull up on the seat to ensure that it is locked into place correctly
Detaching the Seat
IMPORTANT: Always remove child before detaching the seat
· Lift both release levers on each seat locking latch at the same time
· Lift upward
11
Operating Instructions Folding
IMPORTANT: Always apply brake and remove children before folding the stroller
· Pull up both frame release levers located just below the stroller handle, and press the stroller handle down
· Continue folding until the chassis lock engages
TIP: You may need to compress the frame to engage the chassis lock
Swivel Wheels · Slide the swivel lock on the front wheel housing to the left to allow wheel to swivel, or right to lock the wheel straight
12
Operating Instructions Leg Rest · Depress buttons on both sides of the leg rest hinge and hold while raising or lowering the leg rest to the desired position
Recline · Lift and hold the recline lever on the back of the seat and hold while raising or lowering the seat back to the desired position
Handle Angle · Depress and hold the two release buttons on the inside of the handle assembly while raising or lowering the handle to the desired position
13
Securing Your Child · Release the harness by depressing the button in the center of the buckle while pulling the two top tongues away from the buckle assembly
· Sit child in seat and unzip the seat back to access the harness height adjuster
TIP: You may need to loosen the harness to adjust the harness height
· Squeeze the adjuster to release and slide up or down to one of the three positions
NOTE: Adjusted harness height should be at or above the shoulders of the child
14
Securing Your Child · Buckle the harness by pressing the tongues on the harness straps into the buckle assembly
NOTE: Ensure the straps are not twisted as they may become uncomfortable for the child
· Tighten or loosen the harness straps by sliding the harness adjusters
Buckle tongues separate for added safety. To reconnect buckle tongues, line up the two pieces and slide the upper portion onto the track on the lower piece
15
Infant Car Seat Mode Attaching Britax Infant Car Seat Adapters · Slide each of the adapters under the infant car seat handle and into the shell until they click into place
NOTE: There is a left and right adapter and orientation should be as shown
· Pull downward on the adapter to ensure that it is secure
Removing Britax Infant Car Seat Adapters · Pull the release lever and slide the adapters down and out of the infant car seat shell
16
Infant Car Seat Mode Attaching a Britax Infant Car Seat · Lock the parking brake · Align the adapters and insert into both chassis sockets
· Push down until a click is heard
· Pull up on the seat to ensure that it is secure
17
Infant Car Seat Mode Removing a Britax Infant Car Seat · Set the parking brake · Lift both release levers on each seat locking latch at the same time
NOTE: When removing infant car seat from stroller, take care that the car seat does not tip and fall
· Lift upward
NOTE: Once the infant car seat adapters are installed, they do not need to be removed. [. . . ] Neither Britax, nor the retailer selling this product, authorizes any person to create for it any other warranty, obligation, or liability in connection with this product .
24
Visit. our. website. at. www . Britax . com. for. more. information .
Britax Child Safety, Inc. 13501 South Ridge Drive Charlotte, NC 28273 USA A Britax Childcare Group Limited company Tel. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE BRITAX B-SCENE
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual BRITAX B-SCENE will begin.