Detailed instructions for use are in the User's Guide.
[. . . ] , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , MFC 7050C , , , , , , , , , , , , , , ,
OWNER'S MANUAL
®
If You Need to Call Customer Service
Please complete the following information for future reference: Model Number MFC 7050C Serial Number:* __________________________
Date of Purchase: __________________________ Place of Purchase: __________________________ * The serial number is on the back of the unit. Retain this Owner's Manual with your sales receipt as a permanent record of your purchase, in the event of a theft, fire or warranty service.
© 19961999 Brother Industries, Ltd.
Brother Numbers
Fax-Back System
Brother Customer Service has installed an easy-to-use Fax-Back System, so you can get instant answers to common technical questions and product information for all Brother products. You can use the system to send faxes to any fax machine, not just the one from which you are calling. If you can't resolve a difficulty with your MFC using this manual, call our Fax-Back System, and follow the voice prompts to receive faxed instructions about using the system and an index of Fax-Back subjects. [. . . ] 8-1
WARNING
You can set up phone credit card numbers the same way. However, when using combined dialing, do NOT send a cover page because your credit card number will be on it!
Hold
1 2 3
Press Hold to put a call on Hold. Picking up an extension handset will not release the call from Hold.
Dialing
Pause
Press Redial/Pause to insert a 3. 5 second pause between numbers. If you are dialing overseas, you can press Redial/Pause as many times as needed to increase the length of the pause.
TELEPHONE OPERATION
9-3
Redial
If you dialed using Hook and got a busy signal, press Hook again to clear the line. You can dial again easily by pressing Redial/Pause .
Tone/Pulse
If you have pulse dialing service, but need to send tone signals (for telephone banking, for example), follow the directions below. If you have touch tone service, you do not need this feature to send tone signals.
1 2 3
Lift the handset. Digits dialed after this send tone signals.
When you hang up, the MFC returns to pulse dialing service.
Searching Telephone Index
See Storing One Touch Dial Numbers p. 8-3 You can search for names you have stored in One Touch and Speed Dial memories. Names are stored alphabetically.
1 2 3 4 5
Press Tel-index , then enter the first letter of the name you're looking for. Press or to search the memory.
When the screen displays the name you want to call, press Hook , (or for a voice call, pick up the handset). If you pressed Hook to dial the call, pick up the handset when the other party answers. (The speaker works only one way; the other party won't be able to hear you unless you pick up the handset. ) When the call is over, hang up.
6
9-4
TELEPHONE OPERATION
MFC Settings and Activity
You can print the following lists and reports:
10
Printing Reports
1. XMIT REPORT 2. ACT. REPORT 3. ALL DIAL
Choose if you would like a Transmission Verification Report printed after all faxes you send. Activity Report lists information about the last 50 incoming and outgoing faxes. Lists names and numbers stored in One Touch and Speed Dial memory, in numerical order. Lists settings for INITIAL SETUP, SETUP RECEIVE, SETUP SEND, TEL SERVICE, PRINT REPORTS and SETUP MSG CTR.
Printing Reports
4. TEL. INDEX
5. USER SETTINGS
6. MEMORY STATUS
Lists summary information and amount of occupied memory.
PRINTING REPORTS
10-1
To Print a Report
See Printing Reports p. (For example, press 4 to print the TEL-INDEX. ) or to select
For the Activity Report, also press PRINT REPORT?Press Stop to exit.
Transmission Verification (Xmit) Report
You can use the Xmit Report as proof that you sent a fax. This report lists the name or fax number of the receiving party, the time and date of transmission, and if the transmission was successful. When the feature is OFF, the report is printed automatically only if there's an error during transmission. When the feature is ON, the report is printed with every fax you send.
1 2 3
Press Function , 1 , 6 , 1 . Press or to select ON or OFF and press Set .
Press Stop to exit.
Activity Report Interval
You can set the MFC to print activity reports at a specific interval (6, 12, 24 hours, 2, 4 or 7 days). If you set the interval to OFF, you can print the report by following the steps in the previous section.
1 2 3 4 5
10-2
Press Function , 1 , 6 , 2 . [. . . ] See Troubleshooting Distinctive Ring 6-9, 6-10 document dark/light 7-9 jam 24-4 resolution 7-2 size 7-1 tray 2-6 drivers fax 17-4 installing 14-5 printer 16-1 TWAIN compliant 17-7 dual access 7-3
F
fax codes changing 6-7 Fax Receive Code 6-6, 6-7 Remote Access Code 12-10 Telephone Answer Code 6-6, 6-7 troubleshooting 6-6 Fax Forwarding changing remotely 12-11, 12-14 setting up at MFC 12-8 Fax Receive Code 6-6, 6-7 fax tones 1-2 fax(es) in PC. See Multi-Function Link® Pro
I-2
INDEX
fax(es), stand-alone receiving 6-1 erasing from memory 12-7 forwarding 12-8, 12-11 polling 6-7~6-8. See also polling printing from memory 12-6 reducing to fit on paper 6-4 retrieving from remote site 12-10 sending 7-1 automatic fax redial 7-3 automatic transmission 7-3 broadcasting 7-11 canceling from memory 7-5 contrast 7-9 cover page. See cover page delayed 7-10 from memory (dual access) 7-3 in real time 7-4 manual transmission 7-2 overseas 7-9 polling 7-12. [. . . ]