User manual CARVIN UX1000MC

[. . . ] Press "UP" button for "LOCK-ON" mode and "DOWN" button for "LOCK-OFF" mode. GROUP DISPLAYED Press "SET" for three seconds for the Group digit display. Press "UP" for LOCK-ON mode and "DOWN" button for LOCK-OFF mode. RELIEVED LOCK-ON Press "SET" for three seconds till "LOCK ON" displays, then press "DOWN" and "SET" at the same time to store LOCK-ON relieved. [. . . ] The receiver can be mounted in a standard 19" rack (1U) with use of the optional UX-DR adapter. The versatile UBP1000 belt-pack transmitter is designed for use with condenser microphones as well as Hi-Z instrument pickups. Please note that in multiple-system applications there must be one transmitter per receiver. GETTING STARTED QUICKLY If you're like most new owners, you're probably in a hurry to plug your wireless system in and use it. With the wireless system unplugged and the unit turned off, complete the following procedures: 1. CHANNEL CHECK Check that both the transmitter and receiver are set to corresponding channel. If multiple systems are used, each system must be set to their own channel. OUTPUT CONNECTIONS There are two audio outputs on the back of the receiver: balanced XLR and unbalanced 1/4". POWER CONNECTIONS Connect the included AC adapter to the DC power input on the back of the receiver. RECEIVER POWER ON Turn down the Volume control of the receiver as well as the mixer. The power indicator will light up even though the transmitter is not on. BELT PACK SETTINGS Connect the instrument cable or mic to the Belt-pack. Reduce if distortion occurs. For your records, record the following information. Serial No. _____________________ Invoice Date_______________ rev A 6. TRANSMITTER POWER ON Switch the transmitter mic to the "on" position. SOUND CHECK To do a sound check, gradually raise the level while watching the AF level indicator. This indicates that maximum level without distortion has been reached. On the belt pack adjust the AF level of the transmitter using the included screwdriver. RECEIVING INSPECTION--read before getting started INSPECT YOUR WIRELESS SYSTEM FOR ANY DAMAGE which may have occurred during shipping. If any damage is found, please notify the shipping company and CARVIN immediately. In the event you have to re-ship your unit, always use the original carton and packing material. This will provide the bestpossible protection during shipment. CARVIN and the shipping company are not liable for any damage cause by improper packing. Please allow several days for the rest of your order to arrive before inquiring. [. . . ] B battery case slides down replace batteries fine gain settings GAIN Sensitivity Set to 0 for instruments -20 -6 0 Set to -20 for mics Antenna UP Button Down Button Hold to release battery tray UX-HM2 UX-LP1 UXGT FIG. C While holding the higher part of the transmitter body, unscrew the handle. E Use the UMC1000-ID 7 color coded rings to identify multiple microphones in use. Each color can correspond to a different wireless channel. MUTE FIG. [. . . ]