User manual CAT EYE CC-MC100W MICRO WIRELESS

[. . . ] To start/stop measurement using the START/STOP button, turn off Auto-mode. (The speed is not displayed. ) [If the signal icon does not flash, reduce the distance between the sensor and computer, adjust the position of the magnet, and spin the wheel again. [. . . ] 1 year (If the computer is used for 1 hour/day without the backlight on) Sensor: Until Total Distance reaches about 10, 000 km (6, 250 mile) * This is the average figure of being used under 20°C temperature and the dis tance between the computer and the sensor is 65 cm. * If the backlight is used frequently, the battery life diminishes accordingly. 4-bit 1-chip microcomputer (Crystal controlled oscillator) Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0100 mm - 3999 mm (default figure A : 2095 mm, B : 2050 mm) Working Temperature . . . . . . . 0°C - 40°C (32°F - 104°F) Dimension/Weight 52. 5 x 38 x 22 mm [2-3/32" x 1-1/2" x 7/8"] / 30 g [1. 06 oz] * The factory-loaded battery life might be shorter than the above-mentioned specification. * The specifications and design are subject to change without notice. Option Parts #169-6667 Center Mount Kit #169-9760 Magnet for Composite Wheel Starting/Stopping measurement This computer allows automatic (Auto-mode) or manual measurement. The maximum speed and total distance will update, regardless of measurement. · Auto-mode (automatic measurement) If the icon is visible, measurement is automatic. In Auto-mode, starting/stopping measurement using the START/ STOP button is impossible. · Manual measurement If the icon does not light, starting/stopping the measurement using the START/STOP button is possible. For further information, see the MENU FLOW. #169-9690 Hi-Power Wheel Magnet LIMITED WARRANTY - 2-Year Computer/Sensor only (Accessories/Attachments and Battery Consumption excluded) If trouble occurs during normal use, the part of the Main Unit or sensor will be repaired or replaced free of charge. To return the product, pack it carefully and remember to enclose the warranty certificate with instruction for repair. [. . . ] If two weeks' inactivity elapses, power-saving mode will change to SLEEP mode. Pressing the MODE or START/STOP button in SLEEP mode brings up the measuring screen. Dual Wheel Size Two wheel sizes (Wheel sizes and ) can be registered on the computer. [. . . ]