User manual DBX DRIVERACK PA
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual DBX DRIVERACK PA. We hope that this DBX DRIVERACK PA user guide will be useful to you.
You may also download the following manuals related to this product:
DBX DRIVERACK PA QUICK START GUIDE (1285 ko)
DBX DRIVERACK PA COMPLETE EQUALIZATION (2825 ko)
Manual abstract: user guide DBX DRIVERACK PA
Detailed instructions for use are in the User's Guide.
[. . . ] This connection supplies 15 Volts of phantom power to the microphone.
Back To Virtual PA
16
Index
RTA Input Button
This is the RTA INPUT button. Pressing this button will engage the Auto EQ.
Back To Virtual PA
17
Index
LCD/Button Array
This is the BUTTON ARRAY. Use these buttons to navigate through the DriveRack PA
This is the LCD DISPLAY. This display allows you to view the various pages within the DriveRack PA.
Left Click on a BUTTON or TEXT in the LCD to learn more.
Back To Virtual PA
18
Index
Preset #
This shows the currently selected PROGRAM or PRESET #.
Note: There are USER and FACTORY presets. [. . . ] They set a "ceiling" on the output level and help protect speakers from being overdriven and amplifiers from clipping.
Limiter
Prev Slide
More Info
44
Index
Limiter
This is the first (or high output) LIMITER module. Here you can set the THRESHOLD of when the Limiter will be engaged.
Prev Slide Next Page
45
This is your THRESHOLD INDICATOR.
"-"=Below Threshold "O"=In the Overeasy Range "+"=Over the Threshold
This shows which OUTPUTS you are editing.
H="Highs"
Here you can turn the Limiter ON & OFF.
Index
Limiter
This is your GAIN REDUCTION METER. Here you can set the THRESHOLD of when the Limiter will be engaged.
Prev Slide Next Page
46
This is the second (or mid output) LIMITER module. This GRAPH shows you how the crossover points are set a at a glance.
This shows which OUTPUTS you are editing.
L="Lows"
This is the crossover point which is edited on this page. This is the crossover FREQUENCY for the low pass on the low outputs.
This is the filter type and slope selected for the low pass filter for the low outputs.
Prev Slide
Next Page
51
Index
Xover (Crossover)
This is the third page in the XOVER module. This page is for editing the HIGH PASS filter on the "Mid Outputs". This is the filter type and slope selected for the high pass filter for the mid outputs.
This shows which OUTPUTS you are editing.
M="Mids"
This is the crossover point which is edited on this page. This is the crossover FREQUENCY for the high pass on the mid outputs.
Prev Slide
Next Page
52
Index
Xover (Crossover)
This is the fourth page in the XOVER module. This page is for editing the LOW PASS filter on the "Mid Outputs". This GRAPH shows you how the crossover points are set a at a glance.
This shows which OUTPUTS you are editing.
M="Mids"
This is the crossover point which is edited on this page. This is the crossover FREQUENCY for the low pass on the mid outputs.
This is the filter type and slope selected for the low pass filter for the mid outputs.
Prev Slide
Next Page
53
Index
Xover (Crossover)
This is the fifth page in the XOVER module. This page is for editing the HIGH PASS filter on the "High Outputs". This is the filter type and slope selected for the high pass filter for the high outputs.
This shows which OUTPUTS you are editing.
H="Highs"
This is the crossover point which is edited on this page. This is the crossover FREQUENCY for the high pass on the high outputs.
Back To X-Over
Prev Slide
54
Index
Active Outputs
These letters indicate which OUTPUTS are active and how they are configured.
LH=Left High RH=Right High LM=Left Mid RM=Right Mid LL=Left Low RL=Right Low Note: You may see an "ML" rather than an "LL & "RL" for the subwoofer outputs. This means that a mono subwoofer was selected rather than stereo subs in the System Setup Wizard.
Back To Virtual PA
55
Index
Previous Page
This is the PREV PG (Previous Page) button. Press this button to go back to the previous page within the currently selected Last or module.
Back To Buttons
56
Index
Next Page
This is the NEXT PG (Next Page) button. Press this button to go to the next page within the currently selected Last or module.
Back To Buttons
57
Index
Delay
This is the DELAY button. Press this button to enter the Delay module.
Note: Pressing this button multiple times will toggle through the Delay modules for the various active outputs.
Back To Buttons
More Info
58
Index
These are the output Delay modules. These delays are suitable for driver alignment but not delay towers (10 ms max).
Delay
Back To Delay
More Info
59
Index
Delay
This is the first (or high output) DELAY module. Here you can turn the delay module ON & OFF.
This shows which OUTPUTS you are editing.
H="Highs"
Here you can change the delay TIME in coarse or fine increments. Up to 10 ms is available.
Here you select whether you want to set the time in MILLISECONDS, FEET, or METERS.
Prev Slide
Next Page
60
Index
Delay
Here you can turn the delay module ON & OFF.
This is the second (or mid output) DELAY module. This page will only be available in a 3 Way setup.
This shows which OUTPUTS you are editing.
M="Mids"
Here you can change the delay TIME in coarse or fine increments. [. . . ] It is also possible to send a full range signal out of these outputs if needed. Please see the "Advanced Configurations" section for more information.
Back To Virtual PA
78
Index
Mid Output Jacks
These are the MID OUTPUT jacks. Connect these jacks to the mid frequency drivers amplifier when using a 3-Way system.
Note: It is possible to make these jacks output a full range signal.
Back To Virtual PA
79
Index
High Output Jacks
These are the HIGH OUTPUT jacks. Connect these jacks to the high frequency drivers amplifier in a 2-Way or 3-Way system or the amplifier for a pair of full range speakers in a passive or powered full range system.
Back To Virtual PA
80
Index
Operating Level Switch
This is the NOMINAL OPERATING LEVEL switch. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE DBX DRIVERACK PA
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual DBX DRIVERACK PA will begin.