User manual GENERAL ELECTRIC 21828

[. . . ] Precautions of Use The quality of communication depends on the location and environment of the base and the handset. The 21828 must be kept away from sources of excessive heat (radiators, direct sunlight, etc. ) and protected against vibrations and dust. Never allow your telephone to come into contact with water or other liquids or with aerosols. To reduce the risk of interference and optimize reception, take particular care to keep it away from the immediate vicinity of windows, large metal objects, reinforced concrete, televisions, music centres, halogen lamps or heating devices, fluorescent lighting, burglar alarms, microwave ovens, computers, etc. [. . . ] It is only possible to enter subscribers in the phone book who are not already entered. Muting the Microphone Press key to switch the microphone on or off during a call. Holding Calls / Forwarding Calls If the telephone is connected to a PABX system, it is possible to put calls on hold and call other extension lines or to forward calls. Press "R" key to put the call on hold and dial the extension number (e. g. Press "R" key once more to take the call back again or press key to forward the call. Note: If several handsets are registered on the base station and a call should be put on hold or forwarded, press "INT/OK" key instead of "R". Note: The above information can vary according to the PABX system used. or key to select submenu and press "INT/OK" Press or key to scroll through the phone book. If editing, edit the number and name (using "C" for deleting). Press "INT/OK" key when finished. Handset Settings Changing the Ringing Volume Press key until the HANDSET menu appears and Press "INT/OK" key three times. Press or key to select the required volume and Press "INT/OK" key. If the ringer symbol appears as non dotted line, the ringing volume will be switched to OFF. Changing the Ringer Melody (external / internal) Press key until the HANDSET menu appears and Press "INT/OK" key twice. Use or key to select the required submenu (EXT RINGER or INT RINGER) and press "INT/OK" key. Use or key to select the required melody (1-10) and press "INT/OK" key to confirm. Entering/Changing Handset Name It is possible to assign a name to each handset. Press key until the HANDSET menu appears and press "INT/OK" key. MOBIL 1) and press "INT/OK" key to confirm. Switching the Key Tone On/Off Press key as often as necessary until the HANDSET menu appears and press "INT/OK" key. key to select the submenu and press key to select the setting and press "INT/OK" Saving a Prefix It is possible to save prefix numbers in the handset. This number is then recalled after pressing and hold "0" key for two seconds. Press key as often as necessary until the HANDSET menu appears and press "INT/OK" key. key to select the submenu and press 10 Enter prefix number (e. g. Press "INT/OK" key to confirm. Activating/Deactivating Automatic Call Answering The automatic call answering function enables the incoming call to be taken immediately when the handset is removed from the base station. Press key as often as necessary until the HANDSET menu appears and press "INT/OK" key. key to select the submenu and press Use or key to switch automatic call answering on or off and press "INT/OK" key to confirm the input. Press "INT/OK" key to confirm. Activating/Deactivating Call Timer It is possible to display the call duration of a call on the handset. Press key as often as necessary until the HANDSET menu appears and press "INT/OK" key. [. . . ] Enter the PIN (factory setting = 0000) and press "INT/OK" key. Press "INT/OK" key to confirm. Deregister HS If several handsets are registered on one base station, they can deregister each other mutually. Press key until the BASE menu appears and press "INT/OK" key. Press or key to select the required submenu and press "INT/OK" key. [. . . ]