User manual GIGABYTE GS-R12P4S
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual GIGABYTE GS-R12P4S. We hope that this GIGABYTE GS-R12P4S user guide will be useful to you.
You may also download the following manuals related to this product:
GIGABYTE GS-R12P4S (17079 ko)
Manual abstract: user guide GIGABYTE GS-R12P4S
Detailed instructions for use are in the User's Guide.
[. . . ] 9 Contents Packages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 GS-R127-RH Series Model List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Chapter 1 Features Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Chapter 2 System Hardware Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] To clear CMOS, temporarily short 2-3 pin.
1 1
1-2 close: Normal (Default setting) 2-3 close: Clear CMOS
28
BIOS Setup
Chapter 5 BIOS Setup
BIOS Setup is an overview of the BIOS Setup Program. The program that allows users to modify the basic system configuration. This type of information is stored in battery-backed CMOS RAM so that it retains the Setup information when the power is turned off.
ENTERINGSETUP
Power ON the computer and press <F2> immediately will allow you to enter Setup.
CONTROLKEYS
<> <> < < > > Move to previous item Move to next item Move to the item in the left hand Move to the item in the right hand Main Menu - Quit and not save changes into CMOS Status Page Setup Menu and Option Page Setup Menu - Exit current page and return to Main Menu <+/PgUp> Increase the numeric value or make changes <-/PgDn> <F1> <F2> <F3> <F4> <F6> <F7> <F8> <F9> <F10> Decrease the numeric value or make changes General help, only for Status Page Setup Menu and Option Page Setup Menu Reserved Reserved Reserved Reserved Reserved Reserved Load the Optimized Defaults Save all the CMOS changes, only for Main Menu
<Esc>
29
GS-R127-RH Series Rack Mount Server
GETTINGHELP Main Menu
The on-line description of the highlighted setup function is displayed at the bottom of the screen.
Status Page Setup Menu / Option Page Setup Menu
Press F1 to pop up a small help window that describes the appropriate keys to use and the possible selections for the highlighted item. To exit the Help Window press <Esc>.
Main
This setup page includes all the items in standard compatible BIOS.
Advanced
This setup page includes all the items of AMI special enhanced features. (ex: Auto detect fan and temperature status, automatically configure hard disk parameters. )
Security
Change, set, or disable password. It allows you to limit access the system and setup.
Server
Server additional features enabled/disabled setup menus.
Boot
This setup page include all the items of first boot function features.
Exit
There are five optionsin this selection: Exit Saving Changes, Exit Discarding Changes, Load Optimal Defaults, Load Failsafe Defaults, and Discard Changes.
30
BIOS Setup
Main
Once you enter Phoenix BIOS Setup Utility, the Main Menu (Figure 1) will appear on the screen. Use arrow keys to select among the items and press <Enter> to accept or enter the sub-menu.
Figure 1: Main
System Time
The time is calculated based on the 24-hour military time clock. Note that the "Day" automatically changed after you set the date. (Weekend: DD: MM: YY) (YY: 1099~2099)
31
GS-R127-RH Series Rack Mount Server
IDE Primary Master, Slave / Secondary Master, Slave
The category identifies the types of hard disk from drive C to F that has been installed in the computer. Manual type is user-definable; Auto type which will automatically detect HDD type. Note that the specifications of your drive must match with the drive table. (Default setting) Disable this function.
C1 Enhanced Mode
With enabling C1 Enhanced Mode, all loical processors in the physical processor have entered the C1 state, the processor will reduce the core clock frequency to system bus ratio and VID. (Default setting)
Execute Disable Bit
Enabled Disabled Enable Execute Disable Bit. (Default setting)
35
GS-R127-RH Series Rack Mount Server
Advanced
About This Section: Advanced
With this section, allowing user to configure your system for basic operation. User can change the processor options, chipset configuration, PCI configuration and chipset control.
Figure 2: Advanced
36
BIOS Setup
Memory Configuration
Figure 2-1: Memory Configuration
System Memory/Extended Memory/DIMM Group 1~8 Status
These category is display-only which is determined by POST (Power On Self Test) of the BIOS.
Memory Reset
Yes Select `Yes', system will clear the memory error status. After rebooting system, the Memory Reset item will set to `No' automatically. (Default setting)
37
GS-R127-RH Series Rack Mount Server
Extend RAM Step
Enabled Disabled Enable test extended memroy process. (Default setting)
Memory Branch Mode
Sequential Interleave Mirror Single Channel 0 Memory will use sequential mode to save date. Memory will use Interleave mode for to distribute every one memory to save date. Only Single channel 0 will be detect.
Branch 0 Rank Sparing
Enabled Disabled Enable this item, memory will spare two(dual channel) of all slots. (Default setting)
Branch 1 Rank Sparing
Enabled Disabled Enable this item, memory will spare two(dual channel) of all slots. (Default setting)
38
BIOS Setup
PCI Configuration
Figure 2-2: PCI Configuration
Embedded NIC LAN 1 Option ROM Scan
Enabled Disabled Enable onboard LAN1 device and initialize device expansion ROM. [. . . ] Click "Yes".
65
GS-R127-RH Series Rack Mount Server
4. Installation completed, Click "Finish" to restart computer.
66
Driver Installation
B.
ATI ES1000 VGA Driver Installation
Insert the driver CD-title that came with your motherboard into your CD-ROM driver, the driver CD-title will auto start and show a series of Setup Wizard dialog boxes. If not, please double click the CD-ROM device icon in "My computer", and execute the setup. exe. The CD auto run program starts, Double click on "ATI VGA Driver" to start the installation. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE GIGABYTE GS-R12P4S
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual GIGABYTE GS-R12P4S will begin.