Detailed instructions for use are in the User's Guide.
[. . . ] 7 Chapter 1 Features Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Chapter 2 System Hardware Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Step 2-1: Chassis Removal and Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Step 2-2: CPU Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Step 4 Reverse Step 1, , 2, 3 to replace the chassis cover
3
1
2
1
10
Hardware Installation Process
Step 2-2: CPU Installation
Please make sure the CPU type and speed that are supported by the motherboard.
Step 1 Raise the metal locking lever on the socket. Step 3 Push the metal lever back into locked position.
3 1
2
11
GS-R22PE Rack Mount Server
Step 2-3: Heat Sink Installation
Step 1 Place the Heat Sink on the CPU. Before putting the heat sink on the CPU, please well remember to apply the thermal conductivity compound on the CPU. Step 2 Seat the heat sink in the retention modules with the four screws. Installation completed.
2 2 2 2
1
12
Hardware Installation Process
Step 2-4: Memory Installation
Step 1. Insert the DIMM memory module vertically into the DIMM slot, and push it down. Close the plastic clip at both edges of the DIMM slots to lock the DIMM module. DIMM must be populated in order starting from DIMM_A1 or DIMM_C1 socket. Reverse the installation steps when you wish to remove the DIMM module.
2 1 2
DIMM_C4 DIMM_D4 DIMM_C3 DIMM_D3
CPU2
DIMM_C2 DIMM_D2 DIMM_C1 DIMM_D1
DIMM_B1 DIMM_A1 DIMM_B2 DIMM_A2
CPU1
DIMM_B3 DIMM_A3 DIMM_B4 DIMM_A4
13
GS-R22PE Rack Mount Server
DIMM Population Table
DIMM: Single or dual Rank Max. capacity 4GB.
CPU1 Single Channel (One DIMM) Dual Channel (2 DIMMs) Dual Channel (4 DIMMs) Dual Channel (8DIMMs) CPU2 Single Channel (One DIMM) Dual Channel (2 DIMMs) Dual Channel (4 DIMMs) Dual Channel (8DIMMs) DIMM_A4 DIMM_B4 DIMM_A3 DIMM_B3 DIMM_A2 DIMM_B2 DIMM_A1 Populate Populate Populate Populate DIMM_B1 Populate Populate Populate
Populate
Populate
Populate
Populate
Populate Populate
Populate Populate
DIMM_C4 DIMM_D4 DIMM_C3 DIMM_D3
Populate
Populate
Populate
Populate
DIMM_C2 DIMM_D2 DIMM_C1 DIMM_D1 Populate Populate Populate Populate Populate Populate Populate Populate Populate Populate Populate
14
GS-R22PE Rack Mount Server
Step 2-5: PCI Expansion Card Installation
GS-R1231-RH provides expansion riser slots for two PCI-E x16 slot. To install the peripheral, please go through the following steps.
Note!!This type of information is stored in battery-backed CMOS RAM so that it retains the Setup information when the power is turned off.
ENTERINGSETUP
Power ON the computer and press <F2> immediately will allow you to enter Setup.
CONTROLKEYS
<> <> < < > > Move to previous item Move to next item Move to the item in the left hand Move to the item in the right hand Main Menu - Quit and not save changes into CMOS Status Page Setup Menu and Option Page Setup Menu - Exit current page and return to Main Menu Decrease the numeric value or make changes General help, only for Status Page Setup Menu and Option Page Setup Menu Reserved Reserved Reserved Reserved Reserved Reserved Load the Optimized Defaults Save all the CMOS changes, only for Main Menu
<Esc>
<+/PgUp> Increase the numeric value or make changes <-/PgDn> <F1> <F2> <F3> <F4> <F6> <F7> <F8> <F9> <F10>
29
GS-R22PE Rack Mount Server
GETTINGHELP Main Menu
The on-line description of the highlighted setup function is displayed at the bottom of the screen.
Status Page Setup Menu / Option Page Setup Menu
Press F1 to pop up a small help window that describes the appropriate keys to use and the possible selections for the highlighted item. To exit the Help Window press <Esc>.
Main
This setup page includes all the items in standard compatible BIOS.
Advanced
This setup page includes all the items of AMI special enhanced features. (ex: Auto detect fan and temperature status, automatically configure hard disk parameters. )
Security
Change, set, or disable password. It allows you to limit access the system and setup.
Server
Server additional features enabled/disabled setup menus.
Boot
This setup page include all the items of first boot function features.
Exit
There are five optionsin this selection: Exit Saving Changes, Exit Discarding Changes, Load Optimal Defaults, Load Failsafe Defaults, and Discard Changes.
30
BIOS Setup
Main
Once you enter Phoenix BIOS Setup Utility, the Main Menu (Figure 1) will appear on the screen. Use arrow keys to select among the items and press <Enter> to accept or enter the sub-menu.
Figure 1: Main
System Time
The time is calculated based on the 24-hour military time clock. Note that the "Day" automatically changed after you set the date. (Weekend: DD: MM: YY) (YY: 1099~2099)
BIOS Verison/BIOS Date
These two fields indicate the main board BIOS version and release date.
31
GS-R22PE Rack Mount Server
Processor Information
These following items display all information of current CPU Type, CPU Speed, and CPU Count. These items are display-only which is determined by POST (Power On Self Test) of the BIOS.
Total Memory Size
This item identifies the total memory size.
32
BIOS Setup
Advanced
About This Section: Advanced
With this section, allowing user to configure your system for basic operation. User can change the processor options, chipset configuration, PCI configuration and chipset control.
Figure 2: Advanced
33
GS-R22PE Rack Mount Server
Advanced Processor Options
Figure 2-1: Advanced Processor Option 34
GS-R22PE Rack Mount Server
Advanced Processor Option
This category includes the information of CPU Type, CPU Speed, CPU1/CPU2 ID, CPU1/CPU2 L2 Cache, CPU Type, CPU Speed. Setup menu for AMD Virtualization (TM) Technology, Enhanced Virus Protection, Power Now Technology, Node Interleave, and ACPI SRAT Table.
AMD Virtualization (TM) Technology
AMD Virtualization Technology will allow a platform to run multiple operating systems and applications in independent partitions. With virtualization, one computer system can function as multiple "virtual" systems. [. . . ] (Default setting)
49
BIOS Setup
Hardware Monitor
Figure 2-9: Hardware Monitor
50
GS-R22PE Rack Mount Server
51
BIOS Setup
CPU1/CPU 2/ SystemTemperature
Display the current CPU1/2 temperature and system temperature.
Voltage Monitor: VCORE1/2, 3. 3V, 5V, -12V, +12V, 1. 5V, P1 1. 8V, P2 1. 8V, P1 0. 9V, P2 0. 9V
Detect system's voltage status automatically.
FAN Monitor: SYS FAN1A/1B, SYS FAN2A/2B, SYS FAN3A/3B, SYS FAN4A/4B, SYS FAN5A/5B, SYS FAN6A/6B
Display the current system fan speed.
52
GS-R22PE Rack Mount Server
Security
About This Section: Security
In this section, user can set either supervisor or user passwords, or both for different level of password securities. In addition, user also can set the virus protection for boot sector.
Figure 3: Security
Set Supervisor Password
You can install and change this options for the setup menus. Type the password up to 6 characters in lengh and press <Enter>. The password typed now will clear any previously entered password from the CMOS memory. [. . . ]