User manual H&B DRHD-120

[. . . ] Precautions IMPORTANT The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION : TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The exclamation point within an equilateral triangle is intended to alert the user to the presence fo importantoperating and maintenance(servicing) instructions in the literature accompanying the appliance. These labels can be found on the unit's rear panel. Ces tiquelttes se trousent sur le fond de Pappareil. Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] Chapter Search 1 Select "CHAPTER" by pressing , button. 2 Enter the chapter number by using numeric 0 to 9 button. Time Search 1 Select "TIME" by pressing , button. 2 Enter the time by using numeric 0 to 9 button. For example, if you want to go to 00:31:25, press the numeric buttons in this order (0, 0, 3, 1, 2, 5). It starts to play back from the specified time. 24 Advanced Playback Recording Basic recording To record TV programs, you should search TV channels first. 4 Press SOURCE button to choose the A/V source you want to record. Every time this button is pressed, the A/V source is changed : 1 Press DVD/HDD button to select the HDD(Hard Disk Drive) or a recordable DVD (DVD+R/DVD+RW) on which you want to record. If you want to record on the HDD, press TV/DVD button for HDD to be displayed on TV screen. If you want to record on DVD, load a DVD+RW or DVD+R disc with enough free space for the recording. If the DVD menu is displayed on TV screen automatically, press STOP button twice to stop. Every time this button is pressed, the record quality/recording time is changed as follows. HQ (High Quality) : Highest quality, you can record for up to 1 hour in a blank disc. SP (Standard Play) : Good quality, sufficient for most applications, you can record for up to 2 hours in a blank disc. LP (Long Play) : Slightly lower quality than SP, you can record for up to 3 hours in a blank disc. EP (Extended Play) : Slightly lower quality than LP, you can record for up to 4 hours in a blank disc. SLP (Super Long Play) : Use when maximum recording time is most important, you can record for up to 6 hours in a blank disc. 2 3 If you want to record the TV program, select TV mode. And choose the station you want to record by pressing CHANNEL or CHANNEL + button. 5 6 Press REC button to start your recording. Press PAUSE button if you want to stop the recording for a short while. Press STOP button to stop your recording. NOTE A DVD+R/DVD+RW can record for up to 6 hours, up to 49 titles. If your source is copy-protected, you will not be able to record it. Recording 25 Recording OTR (One touch Timer Recording) 3 1 Press or button to select a new timer program, for example `----', and then press button. During basic recording, press REC button. Every time you press REC button, the recording time will increase by 30 minutes. It is possible to record for up to 3 hours if there is enough room on the disc or HDD. The DVD Recorder will stop automatically after recording for a specific time. 2 If you want to cancel OTR, press STOP button. 4 Enter the timer recording settings. Use , button to select a field, use button to change the value. , Timer Recording For timer recording, the clock, date, and stations must be set correctly. [. . . ] If the DVD Player does not function normally, or if it emits unusual sounds or odors, pull out the plug immediately and contact an authorized technician. If you open or dismantle the shielding, you expose yourself to dangerous voltage and other hazards. Environmental information The system is made of recyclable materials which can be reused if disassembled by authorized personnel. Please follow local regulations for the disposal of packaging materials, used batteries and discarded units. [. . . ]