User manual HARMAN KARDON CITATION 12
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual HARMAN KARDON CITATION 12. We hope that this HARMAN KARDON CITATION 12 user guide will be useful to you.
You may also download the following manuals related to this product:
HARMAN KARDON CITATION 12 Product Brochure (1230 ko)
Manual abstract: user guide HARMAN KARDON CITATION 12
Detailed instructions for use are in the User's Guide.
[. . . ] It is important to also read your owner's manual to the Harman Kardon ADP 303. CONNECTING THE 7. 0 A/V Controller to the ADP 303 The ADP 303 includes loop through audio connection jacks for receiving the audio outputs from the Citation 7. 0 and routing them through the ADP 303. [. . . ] Before making any connections, first, power off all components in your audio system, especially power amplifiers. Follow the diagram below for making the proper connections between your Citation 7. 0 and the ADP 303.
7. 0 AV CONTROLLER BACK PANEL
AUDIO OUTPUTS FRONT L CENTER FRONT SURROUNDS SIDE BACK
R MONO SUB
CITATION AUDIO OUTPUTS TO SIDE CHANNEL AMP INPUTS IF USED
ADP 303 AUDIO INPUTS
ADP 303 AUDIO OUTPUTS
ADP 303 DOLBY DECODER BACK PANEL
IN
OUT AC - 3 RF IN L R L R SURROUND CENTER SUB WOOFER
FROM RF DIGITAL OUTPU T OF LASER DISC PLAYER
TO LEFT FRONT AMP INPUT
TO RIGHT FRONT AMP INPUT
TO LEFT SURR AMP INPUT
TO RIGHT SURR AMP INPUT
TO CENTE R FRONT AMP INPUT
TO SUB WOOFER AMP INPUT
"Y" OUT MONO SUB OUT FOR USE WITH STEREO SUBWOOFERS
If you are using the side channel outputs of your Citation 7. 0 controller, leave these channels connected directly to the side channel amplifier inputs. These channels will not be used for Dolby Digital playback of the ADP 303 digital processor. They will, however, still be used for all playback of 2 channel modes such as 6 AXIS, 70 MM, Dolby, and THX . If your system side channel speaker locations are behind the primary listening position, you may elect to route the side channel outputs of the 7. 0 processor through the ADP 303. In this scenario, the back outputs of the 7. 0 processor will remain directly connected to your amplifier inputs and will not be used for Dolby Digital playback. The maximum output level should closely match the reference level of the 7. 0 A/V Controller. We recommend the use of a SPL meter to accurately set up and match audio levels of the two units. USING the ADP 303 For Dolby Digital Playback, the ADP 303 should be "ON" and the appropriate input selected on the ADP 303. When 6 AXIS or any other matrix surround mode is in use, the ADP 303 will be in a "By-pass" mode and the 7. 0 will operate as if the ADP 303 was not in the circuit. "By Pass" is accessed on the ADP 303 by pressing the "By-pass" button located on the ADP 303 front panel. The ADP 303 will also be in the "By-Pass" mode when the "Power" to the unit is "OFF". [. . . ] You will hear a popping sound when "By-pass" is engaged and disengaged. This is normal and does not reflect a problem with your unit or installation. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE HARMAN KARDON CITATION 12
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual HARMAN KARDON CITATION 12 will begin.