User manual HAWKE 123 DATASHEET

[. . . ] Industrial Cable Glands 123 Application Industrial 'H' Metric Entry 'G' Approx(Compressed Length) Entry Thread The 123 cable gland provides two independant seals on non-armoured elastomer and plastic insulated cables. [. . . ] 13. 5 15. 4 21. 2 28. 0 34. 8 46. 5 58. 3 40. 0 40. 0 40. 1 44. 3 47. 2 49. 6 64. 6 64. 8 68. 0 68. 0 68. 0 68. 0 'G' Hexagon Dimensions Across Flats 24. 0 24. 0 30. 0 36. 0 46. 0 55. 0 65. 0 80. 0 95. 0 106. 4 115. 0 127. 0 Across Corners 27. 7 27. 7 34. 6 41. 6 53. 1 63. 5 75. 1 92. 4 109. 6 123. 0 132. 8 146. 7 ½" ½" ¾" or ½" 1" or ¾" 1¼" or 1" 1½" or 1¼" 2" or 1½" 2½" or 2" 3" or 2½" 3½" 3½" 4" All dimensions in millimetres (except * where dimensions are in inches). For G size glands and above, a 2mm pitch is supplied as standard (1. 5mm pitch with 15mm length of thread can be supplied) please specify when ordering. 1 Smaller 2 Sizes value is applicable when selecting reduced NPT entry option. For O size with M16 thread, the maximum cable outer sheath diameter is 10. 9mm. 3 Accessories including locknuts, sealing washers, serrated washers, earth tags, shrouds, adaptors and reducers are also available. Features Provides superior cable retention to standard unarmoured cable glands, with seal at two independant points. Manufactured in brass (standard), nickel plated brass, 316 stainless steel or aluminium. Brass NPT entries are nickel plated as standard. Technical Data Construction and test standards EN 50262. IP66, IP67 and IP68 (30 metres for 7 days) ingress protection to IEC 60529, EN 60529 and NEMA 4X. 306. www. ehawke. com Connection Solutions To the best of our knowledge the information contained in this leaflet, is accurate at the time of going to print and the company reserves the right to improve or modify any product illustrated without notification. [. . . ] Copyright Condition: This document shall be used only for the purpose for which it is provided and no reproduction or publication of the document may be made and no article may be manufactured or assembled in accordance with information contained in the document without prior written consent of the owner. International HWK104 August '08 Ø 'B' [. . . ]