User manual HOTPOINT AQ114D 697D EU/B

[. . . ] Instructions for installation and use Contents WASHING MACHINE EN EN English, 1 PL Polski, 13 CZ Česky, 25 Installation, 2-3 Unpacking and levelling Connecting the electricity and water supplies Technical data Description of the machine, 4-5 RO Română, 37 Touch control panel Running a wash cycle, 6 Wash cycles and options, 7 Table of wash cycles Wash options AQUALTIS AQ114D 697D Detergents and laundry, 8 Detergent Preparing the laundry Washing recommendations Precautions and advice, 9 General safety Load balancing system Disposal Opening the porthole door manually Care and maintenance, 10 Cutting off the water and electricity supplies Cleaning the machine Cleaning the detergent dispenser drawer Caring for your appliance drum Cleaning the pump Checking the water inlet hose Trouble shooting, 11 Assistance, 12 1 Installation EN !This instruction manual should be kept in a safe place for future reference. If the washing machine is sold, given away or moved, please ensure the manual is kept with the machine, so that the new owner may benefit from the advice contained within it. Read these instructions carefully: they contain vital information relating to the safe installation and operation of the appliance. [. . . ] This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be used for garments which can be washed at 60°C. 2) Test wash cycle in compliance with directive 1061/2010: set wash cycle with a temperature of 40°C. This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be used for garments which can be washed at 40°C. 3) At 60 °C the “Prewash” function cannot be selected. For all Test Institutes: 2) Long wash cycle for cottons: set wash cycle 4) Long wash cycle for synthetics: set wash cycle with a temperature of 40°C. Wash options Steam Hygiene This option enhances washing performance by generating steam during the wash cycle that eliminates any bacteria from fibres while treating them at the same time. Place the laundry in the drum, choose a compatible programme and select option “ “. The steam generated during washing machine operation may cause the porthole door to become hazy. It cannot be used in conjunction with , , , , , Extra rinse By selecting this option, the efficiency of the rinse is increased and optimal residual detergent removal is guaranteed. We recommend this option is used with a full load of washing, or when a large amount of detergent is required. Prewash If this function is selected, the pre-wash cycle will run; this is useful for removing stubborn stains. It cannot be used in conjunction with , , , , , , , , , (90°). Easy Iron By selecting this option, the wash and spin cycles will be modified in order to reduce the formation of creases. At the end of the cycle the washing machine drum will rotate slowly; the “Easy Iron” and START/PAUSE indicator lights will flash. To end the cycle press the START/PAUSE button or the “Easy Iron” button. It cannot be used in conjunction with , , , , , , , , , , , , (60°), . 7 Detergents and laundry EN Detergent The type and quantity of detergent required depend on the type of fabric you are washing (cotton, wool, silk, etc. ), as well as its colour, the washing temperature, the level of soiling and the hardness of the water in the area. Measuring out the detergent carefully will avoid wastage and help to protect the environment: although they are biodegradable, detergents still contain ingredients which alter the balance of nature. We recommend the following: • use powder detergents for white cotton garments and pre-washing. € use liquid detergents for delicate cotton garments and for all low-temperature wash cycles. The detergent should be poured into the relevant compartment - or the dispenser placed directly inside the drum - before the wash cycle begins. [. . . ] Before contacting the Technical Assistance Centre (see “Assistance”), make sure that the problem cannot be not solved easily using the following list. Possible causes / Solutions: • The appliance is not plugged into the socket fully, or not enough to make contact. • • • • The washing machine door remains locked. € If you have selected the function, at the end of the cycle the washing machine drum will rotate slowly; to end the cycle press the START/PAUSE button or the button. [. . . ]