User manual HOTPOINT FH 103 0 IX/HA

[. . . ] Reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Cleaning and user maintenance shall not be made by children without supervision. Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven door glass since they can scratch the surface, which may result in shattering of the glass. WARNING: Ensure that the appliance is switched off before replacing the lamp to avoid the possibility of electric shock. [. . . ] When the oven is off, the “residual heat” bar on the display lights up to indicate high temperatures inside the oven cavity. The individual segments of the bar switch off one by one as the temperature inside the oven falls. Demo mode The oven can operate in the DEMO mode: all heating elements are deactivated, and the controls remain operative. To activate DEMO mode, press and release icon , then icons “ ” and . A “ ” simultaneously for 6 seconds, and then press and release icon buzzer sounds and the TEMPERATURE display shows “dEon”. To deactivate DEMO mode, when the oven is off press and hold icon and icon “ ” simultaneously for 3 seconds. A buzzer sounds and the “dEoF” message disappears from the display. Restoring the factory settings The oven factory settings can be restored to reset all selections made by the user (clock and customised durations). To carry out a reset, switch off the oven, then press and hold the button corresponding to the first manual icon simultaneously for 6 seconds. Cooking mode (top left) and the Once the restore procedure is complete, a buzzer will sound. The first time icon is pressed, the oven will behave as if it is being switched on the for the first time. Standby This product complies with the requirements of the latest European Directive on the limitation of power consumption of the standby mode. If no buttons are pressed for 30 minutes and the control panel/door lock has not been activated, the appliance automatically reverts to standby mode. standby mode is indicated by the high luminosity “Clock button” light. As soon as interaction with the machine resumes, the system’s operating mode is restored. Every time the oven is switched on, it suggests the first manual cooking mode. All cooking modes have a default cooking temperature which may be adjusted manually to a value between 30°C and 250°C as desired (300°C for GRILL mode). Any temperature adjustments will be stored in the appliance memory and suggested again the next time this mode is used. If the selected temperature is lower than the temperature inside the oven, the text “Hot” appears on the TEMPERATURE display. Since the heat remains constant 24 To operate the rotisserie function (see diagram) proceed as follows: 1. Place the rotisserie support in position 3 and insert the spit in the hole provided on the back panel of the oven. The temperature and cooking duration are pre-set values, guaranteeing a perfect result every time - automatically. [. . . ] To save a substantial amount of energy, simply switch off the oven 5 to 10 minutes before the end of your planned cooking time and use the heat the oven continues to generate. € Keep gaskets clean and tidy to prevent any door energy losses • If you have a timed tariff electricity contract, the “delay cooking” option will make it easier to save money by moving operation to cheaper time periods. This product complies with the requirements of the latest European Directive on the limitation of power consumption of the standby mode. Maintenance and care Switching the appliance off Cleaning the appliance • Slight differences in colour on the front of the oven are due to the different materials used, i. [. . . ]