User manual HOTPOINT LFT 116 A/HA.R
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual HOTPOINT LFT 116 A/HA.R. We hope that this HOTPOINT LFT 116 A/HA.R user guide will be useful to you.
You may also download the following manuals related to this product:
HOTPOINT LFT 116 A/HA.R (3376 ko)
HOTPOINT LFT 116 A/HA.R (3376 ko)
HOTPOINT LFT 116 A/HA.R (3376 ko)
HOTPOINT LFT 116 A/HA.R (3376 ko)
HOTPOINT LFT 116 A/HA.R (3376 ko)
Manual abstract: user guide HOTPOINT LFT 116 A/HA.R
Detailed instructions for use are in the User's Guide.
[. . . ]
Operating instructions
DISHWASHER EN
English, 13
Contents
Installation, 14-15
Positioning and levelling Connecting the water and electricity supplies Advice regarding the first wash cycle Technical data
Description of the appliance, 16
Overall view Control panel
Loading the racks, 17
LFT 216 LFT 116
Lower rack Cutlery basket Upper rack
Start-up and use, 18
Starting the dishwasher Measuring out the detergent Wash options
Wash cycles, 19
Table of wash cycles
Rinse aid and refined salt, 20
Measuring out the rinse aid Measuring out the refined salt
Care and maintenance, 21
Shutting off the water and electricity supplies Cleaning the dishwasher Preventing unpleasant odours Cleaning the sprayer arms Cleaning the water inlet filter Cleaning the filters Leaving the machine unused for extended periods
Precautions and advice, 22
General safety Disposal Saving energy and respecting the environment
Troubleshooting, 23 Assistance, 24
Before calling for Assistance
Installation
EN
Keep this instruction manual in a safe place for future reference. If the appliance is sold, given away or moved, please ensure the manual is kept with the machine, so that the new owner may benefit from the advice contained within it. Please read this instruction manual carefully: it contains important information regarding the safe installation, use and maintenance of the appliance. If the appliance must be moved at any time, keep it in an upright position; if absolutely necessary, it may be tilted onto its back. [. . . ] If using a multi-functional product it is not necessary to add rinse aid; however, we recommend that you add salt, especially if you live in an area where the water is hard or very hard. If you do not add salt or rinse aid, the LOW SALT* and LOW RINSE AID* indicator lights remain lit. 1 9 level 1 2 3 4 5*
Rinse aid makes it easier for the crockery to dry, as water runs off surfaces more readily and therefore does not leave streaks or marks. The rinse aid dispenser should be filled: Â When the LOW RINSE AID* indicator light on the control panel is illuminated; 1. Open the dispenser by turning the lid (G) in an anticlockwise direction. Pour in the rinse aid, making sure it does not overflow from the dispenser. Measuring out the rinse aid
For values between 0°f and 10°f, we do not recommend the use of salt. * this setting may cause a slight increase in the duration of the cycle. (°dH = hardness measured in German degrees - °f = hardness measured in French degrees - mmol/l = millimoles per litre)
Adjusting the amount of rinse aid
If you are not completely satisfied with the drying results, you may adjust the quantity of rinse aid used. Use a screwdriver to turn the dosage adjuster (F) to one of the 6 pre-set positions (the default position is set to 4): Â If there are streaks on the crockery, set the adjustment device to a lower number (1-3). Â If drops of water remain on the crockery or if there are limescale marks present after the cycle has finished, set the adjuster to a higher number (4-6). Setting the water hardness
Every dishwasher is equipped with a water softener which, by using refined salt designed especially for this type of appliance, supplies water without limescale which is then used to wash the crockery. This dishwasher offers a setting which helps to reduce pollution and optimises washing performance in accordance with the water hardness level in your area. This information can be obtained from the organisation which supplies your household with water. - Open the door and switch on the machine by pressing the ON/OFF button. - Press the P button and hold for approximately 5 seconds; two short beeps will sound and the indicator light corresponding to the set degree of hardness will flash slowly on the control panel (the water softening system is set to number 3). - Press the P button repeatedly until the desired hardness
In order to achieve the best possible results using a wash cycle, make sure that the dispenser is never empty. Refined salt removes limescale from the water, thus avoiding the formation of deposits on crockery. The salt dispenser is located in the lower part of the dishwasher (see Description) and should be filled: Â When the green float* cannot be seen by simply looking at the cap of the salt dispenser. Â When the LOW SALT* indicator light on the control panel is illuminated; 1. Position the funnel* (see figure) and fill the salt container right up to its edge (this should hold approximately 1 kg); it is not unusual for a little water to leak out. Remove the funnel* and wipe any salt residue away from the opening; rinse the cap under running water and then screw it on, the head facing downwards so as to let the water flow out of the four cracks which are arranged in a star shape on the lower part of the cap. [. . . ] Possible causes / Solutions:
⢠The pl ug has not b een i nserted i nto t he el ectrical socket pr operly, or ther e is no power i n t he house. ¢ The dis hes are r at tling against eac h ot her or against t he s prayer arms. ¢ An exc essive amou nt of foam has been produced: the det ergent has not been meas ured out cor rectly or it is not suit abl e f or use i n dishwashers (see Start -up and use). ¢ The level of t he r efined sal t is low or the dos age setti ng is not suited to t he har dness of t he wat er (see Rins e ai d and salt). [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE HOTPOINT LFT 116 A/HA.R
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual HOTPOINT LFT 116 A/HA.R will begin.