User manual HOTPOINT LSFF 8M116 C EU

[. . . ] LSFF 8M116 EN English Konserwacja i obsługa, 44 Nieprawidłowe działanie i możliwe środki zaradcze, 45 Operating instructions DISHWASHER - Contents Operating instructions, 1 Precautions and advice, 2-3 Product Data, 10 Assistance, 12 Installation, 13-14 Description of the appliance, 15 Refined salt and rinse aid, 16 Loading the racks, 17-18 Detergent and dishwasher use, 19 Wash cycles, 20 Special wash cycles and options, 21 Care and maintenance, 22 Troubleshooting, 23 UA Українська Довідник користувача ПОСУДОМИЙНА МАШИНА - Зміст Довідник користувача, 1 Запобіжні з мет көрсету, 80 Ақаулықтарды жою, 81 1 EN Precautions and advice This appliance was designed and manufactured in compliance with international safety standards. The following information has been provided for safety reasons and should be read carefully. If the appliance is sold, given away or moved, make sure the manual is kept with the machine. Read the instructions carefully, as they include important information on safe installation, use and maintenance. [. . . ] They can be used in a vertical position when arranging dishes or in a horizontal position (lower) to load pans and salad bowls easily. Some models are equipped with Vertical Zone, special pull-out supports*in the rear of the rack that can be used to support frying pans and baking pans in a more vertical position, thus taking up less space. In order to use it, just get hold of the coloured grip and pull it upwards while rotating it forward. The supports can slide right and left to fit the size of the crockery. Wine glasses can be placed safely in the tip-up compartments by inserting the stem of each glass into the corresponding slot. To change the inclination, pull up the tip-up compartment, slide it slightly and position it as you wish. *Only available in selected models with different numbers and positions. 17 EN Tray* Adjusting the height of the upper rack The height of the upper rack can be adjusted: high position to place bulky crockery in the lower rack and low position to make the most of the tip-up compartments by creating more space upwards. The height of the upper rack should be adjusted WHEN THE RACK IS EMPTY. Some dishwasher models are fitted with a sliding tray which can be used to hold small crockery and cutlery. For optimum washing performance, avoid positioning bulky crockery directly below the tray. ) If the rack is equipped with a Lift-Up device* (see figure), lift it up by holding its sides. To restore the lower position, press the levers (A) at the sides of the rack and follow the rack down. € Parts in synthetic material which do not withstand high temperatures. The colours of glass decorations and aluminium/silver pieces can change and fade during the washing process. Tips: • Only use glasses and porcelain guaranteed by the manufacturer as dishwasher safe. € Collect glasses and cutlery from the dishwasher as soon as the wash cycle is over. *Only available in selected models with different numbers and positions. 18 Detergent and dishwasher use Measuring out the detergent Good washing results also depend on the correct amount of detergent being used. Exceeding the stated amount does not result in a more effective wash and increases environmental pollution. In the case of normally soiled items, use approximately either 25g (powder detergent) or 25ml (liquid detergent). If the crockery is only lightly soiled or if it has been rinsed with water before being placed in the dishwasher, reduce the amount of detergent used accordingly. [. . . ] After cleaning the filters, re-place the filter assembly and fix it in position correctly; this is essential for maintaining the efficient operation of the dishwasher. Leaving the machine unused for extended periods If the water hoses are new or have not been used for an extended period of time, let the water run to make sure it is clear and free of impurities before performing the necessary connections. If this precaution is not taken, the water inlet could become blocked and damage the dishwasher. - Unscrew the end of the water inlet hose, remove the filter and clean it carefully under running water. [. . . ]