Detailed instructions for use are in the User's Guide.
[. . . ] Instructions for use
WASHING MACHINE Contents
GB
English, 1
GB
DE
Deutsch, 13
SE
Svenska, 25
Installation, 2-3
Unpacking and levelling Electric and water connections The first wash cycle Technical data
Care and maintenance, 4 FI
Suomi, 37
DK ES
Dansk, 49
NO
Norsk, 61
Cutting off the water or electricity supply Cleaning the washing machine Caring for the door and drum of your appliance Cleaning the pump Checking the water inlet hose How to clean the detergent dispenser
UK
Українська, 73
Precautions and tips, 5
General safety Disposal
Description of the washing machine, 6-7
Control panel Display How to open and shut the drum
IWTE 61251
Running a wash cycle, 8 Wash cycles and options, 9
Table of wash cycles Wash options
Detergents and laundry, 10
Detergent dispenser drawer Preparing the laundry Special wash cycles Load balancing system
Troubleshooting, 11 Service, 12
1
Installation
GB
!Should the appliance be sold, transferred or moved, make sure the instruction manual accompanies the washing machine to inform the new owner as to its operation and features. Read these instructions carefully: they contain vital information on installation, use and safety. If it is placed on a fitted or loose carpet, adjust the feet in such a way as to allow enough room for ventilation beneath the washing machine. [. . . ] If the selected option is not compatible with another
option which has been selected previously, the indicator light corresponding to the first option selected will flash and only the second option will be activated; the indicator light corresponding to the enabled option will remain lit. The options may affect the recommended load value
and/or the duration of the cycle. The corresponding indicator light will become green, remaining lit in a fixed manner, and the door will be locked (the symbol will be on). To change a wash cycle while it is in progress, pause the washing machine using the START/PAUSE button (the START/ PAUSE indicator light will flash slowly in an orange colour); then select the desired cycle and press the START/PAUSE button again. To open the door while a cycle is in progress, press the START/PAUSE button; if the symbol is switched off the door may be opened. Press the START/PAUSE button again to restart the wash cycle from the point at which it was interrupted. This will be indicated by the text “END” on the display; when the symbol switches off (wait approximately 3 minutes) the door may be opened. If you wish to cancel a cycle which has already begun,
press and hold the button. If the selected option is not compatible with the
programmed wash cycle, the indicator light will flash
8
Wash cycles and options
Table of wash cycles
Residual dampness % Total water lt Wash cycles Max. 2 Pairs
6 6
-
-
-
36’ 16’
The length of cycle shown on the display or in this booklet is an estimation only and is calculated assuming standard working conditions. The actual duration can vary according to factors such as water temperature and pressure, the amount of detergent used, the amount and type of load inserted, load balancing and any wash options selected. 1) Test wash cycle in compliance with directive 1061/2010: set wash cycle with a temperature of 60°C. This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be used for garments which can be washed at 60°C. 2) Test wash cycle in compliance with directive 1061/2010: set wash cycle with a temperature of 40°C. This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be used for garments which can be washed at 40°C. For all Test Institutes: 2) Long wash cycle for cottons: set wash cycle with a temperature of 40°C. 3) Long wash cycle for synthetics: set wash cycle 4; with a temperature of 40°C. Wash options
Selecting this option enables you to suitably adjust drum rotation, temperature and water to a reduced load of lightly soiled cotton and synthetic fabrics (refer to the “Table of wash cycles”). ” enables you to wash in less time thereby saving water and electricity. We suggest using a liquid detergent suitably measured out to the load quantity. It cannot be used with the 1, 6, 7, 8, 9, 10, 11, 12, 13, 14, , , programmes. Extra rinse By selecting this option, the efficiency of the rinse is increased and optimal detergent removal is guaranteed. [. . . ] Anslut inloppsslangen till tvättmaskinen genom att skruva fast den till det avsedda vattenuttaget i den bakre delen uppe till höger (se figur). Genmontér panelet efter først at have sørget for, at krogene er indsat i åbningerne, inden panelet skubbes mod maskinen. 53
Beskrivelse af vaskemaskinen
DK
Betjeningspanel
Tast Tast
ON/OFF
TEMPERATUR
Taster med kontrollamper for valg af
Tast med kontrollampe for
FUNTION
START/PAUSE
DISPLAY
PROGRAMMER
Knappen
Tast
Tast
CENTRIFUGERING
FORSINKET START
Tast ON/OFF : Tryk kort på tasten for at tænde eller slukke maskinen. hvis kontrollampen START/PAUSE blinker grønt langsomt , betyder det , at maskinen er tændt. [. . . ]