User manual INTEL DESKTOP BOARD DX79SI
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual INTEL DESKTOP BOARD DX79SI. We hope that this INTEL DESKTOP BOARD DX79SI user guide will be useful to you.
Manual abstract: user guide INTEL DESKTOP BOARD DX79SI
Detailed instructions for use are in the User's Guide.
[. . . ] Intel Desktop Board DX79SI Product Guide
Order Number: G43991-001
Revision History
Revision -001 Revision History First release of the Intel Desktop Board DX79SI Product Guide Date October 2011
Disclaimer
INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL?S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER, AND INTEL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. Intel products are not intended for use in medical, life saving, or life sustaining applications. [. . . ] Installing Linked PCI Express Graphics Cards For more complete installation and configuration information refer to the documentation supplied by the graphics card manufacturer or visit their website.
47
Intel Desktop Board DX79SI Product Guide
Connecting SATA Cables
SATA cables support the Serial ATA protocol. Each cable can be used to connect one internal SATA drive to the Desktop Board. The blue connectors support SATA 6 Gb/s and lower transfer rates and the black connectors support SATA 3 Gb/s and lower transfer rates. Attach one end of the SATA cable to one of the SATA connectors on the board (Figure 21, A) and attach the other end of the cable to the SATA drive (Figure 21, B).
Figure 21. Connecting the Serial ATA Cables
48
Installing and Replacing Desktop Board Components
Connecting to the Internal Headers and Connectors
Before connecting cables to any of the internal headers or connectors, observe the precautions in ?Before You Begin?Figure 22 shows the location of the internal headers on Intel Desktop Board DX79SI.
Figure 22. Internal Headers
49
Intel Desktop Board DX79SI Product Guide
Front Panel Audio Header
Figure 22, A shows the location of the front panel audio header. Table 6 shows the pin assignments and signal names for the front panel audio header. Front Panel Audio Header Signal Names
Pin 1 3 5 7 9 Signal Name PORT 1L PORT 1R PORT 2R SENSE_SEND PORT 2L Pin 2 4 6 8 10 Signal Name GND PRESENCE# SENSE1_RETURN KEY (no pin) SENSE2_RETURN
S/PDIF Header
Figure 22, B shows the location of the S/PDIF header. Table 7 shows the pin assignments and signal names for the S/PDIF connector. S/PDIF Header Signal Names
Pin 1 2 3 Description Vcc S/PDIF Out Ground
Chassis Intrusion Header
Figure 22, C shows the location of the chassis intrusion header. This header can be connected to a mechanical switch on the chassis to detect if the chassis cover is removed. Table 8 shows the pin assignments and signal names for the chassis intrusion header. Chassis Intrusion Header Signal Names
Pin 1 2 Description Intruder Ground
50
Installing and Replacing Desktop Board Components
IEEE 1394a Header
Figure 22, D shows the location of the IEEE 1394a header. Table 9 shows the pin assignments and signal names for the IEEE 1394a header. IEEE 1394a Header Signal Names
Pin 1 3 5 7 9 Signal Name TPA1+ Ground TPA2+ +12 V Key (no pin) Pin 2 4 6 8 10 Signal Name TPA1Ground TPA2+12 V Ground
USB 3. 0 Connector
Figure 22, E shows the location of the USB 3. 0 connector. Table 10 shows the pin assignments and signal names for the USB 3. 0 connector. USB 3. 0 Connector
Pin 1 3 5 7 9 11 13 15 17 19 Signal Name Vbus IntA_P1_SSRX+ IntA_P1_SSTX?IntA_P2_SSRX+ Vbus Pin 2 4 6 8 10 12 14 16 18 20 Signal Name IntA_P1_SSRX?Key (no pin)
51
Intel Desktop Board DX79SI Product Guide
Consumer IR (CIR) Headers
The Desktop Board has two CIR headers: the input or receiver header (Figure 22, H) and the output or emitter header (Figure 22, F). The receiver header consists of a filtered translated infrared input compliant with Microsoft CIR specifications and a ?learning?The learning input is a high-pass input which the computer can use to ?learn? [. . . ] Le prsent appareil numerique nmet pas de bruits radiolectriques dpassant les limites applicables aux appareils numriques de la classe B prescrites dans le Rglement sur le broullage radiolectrique dict par le ministre des Communications du Canada.
Japan VCCI Statement
Japan Statement translation: This is a Class B product based on the standard of the Voluntary Control Council for Interference from Information Technology Equipment (VCCI). If this is used near a radio or television receiver in a domestic environment, it may cause radio interference. Install and use the equipment according to the instruction manual.
86
Regulatory Compliance
Korea Class B Statement
Korea Class B Statement translation: This equipment is for home use, and has acquired electromagnetic conformity registration, so it can be used not only in residential areas, but also other areas.
Ensure Electromagnetic Compatibility (EMC) Compliance
Before computer integration, make sure that the power supply and other modules or peripherals, as applicable, have passed Class B EMC testing and are marked accordingly. Pay close attention to the following when reading the installation instructions for the host chassis, power supply, and other modules: ? [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE INTEL DESKTOP BOARD DX79SI
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual INTEL DESKTOP BOARD DX79SI will begin.