User manual KLIPSCH SF1BK
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual KLIPSCH SF1BK. We hope that this KLIPSCH SF1BK user guide will be useful to you.
Manual abstract: user guide KLIPSCH SF1BK
Detailed instructions for use are in the User's Guide.
[. . . ] KLIPSCH · www. klipsch. com
Make sure you return your warranty card so that we may keep you up-to-date on new Klipsch products and promotions. As always, if you have any questions, contact your local authorized Klipsch dealer.
For your records:
Model
Serial Number
Date Purchased
Dealer Name
193110 15M1199
SP-1, SF-2, SF-1, SB-3, SB-2, SC-1, & SS-1 LOUDSPEAKERS
Owner's Manual & Warranty
CAUTION: RISK OF ELECTRIC SHOCK!To reduce the risk of electric shock and fire, do not remove the cover or back plate of this device. The international symbol of a lightning bolt inside a triangle is intended to caution you to uninsulated "dangerous voltage" within the device's enclosure. [. . . ] If the template is not available, space the mounting screws 4 9/16" apart on a vertical line. · Check the vertical orientation of the marked hole locations with a torpedo level before drilling. · Use a #10 or #12 (21/2 - 3"long) pan head wood screw to mount into the wall stud. · Check the fit of the screw head in the keyhole fitting before installation as screw head sizes do vary. · Drill the proper size pilot holes at the marked positions and install the screws into the wall stud. Leave the back surface of the screw head protruding about 1/4-inch from the wall surface. This will facilitate hooking the keyhole bracket over the screw head with the rubber feet installed. The clearance between the wall and the screw head may need to be adjusted to achieve a proper fit. If a stud is not available, use the proper type and weight rating of drywall or masonry anchor appropriate for the wall construction. Please consult your dealer, custom installer or a building contractor in this situation.
!!
· Do not use the keyhole mounting brackets for ceiling installations!
How to Connect the Synergy Series Speakers
AC POWER / SP-1 ONLY
Since your SP-1 has an internal subwoofer power amplifier, it must be plugged into a nearby AC wall outlet. The SP-1 should be unplugged from the AC power with the power switch in the OFF position during hook up and installation. To eliminate a tripping hazard, all connections should be unplugged from the back panel of the speaker if it is being moved. Avoid extremely long extension cords of small gauge since they can impair the performance of the subwoofer amplifier and present a potential fire hazard. If the SP-1 will not be used for an extended period of time, unplug the power cord from the AC power outlet. Note: 230 volt models are not supplied with an AC power cord, but are equipped with an IEC-type power cord socket. Since your Klipsch SP-1 has built-in electronics, do not place it near sources of heat or moisture. Take care to route the power cord so that it will not be cut, damaged or pinched.
SPEAKER WIRE CONNECTIONS
Switch your electronics OFF when making all connections!When making any type of speaker wire connection be sure to observe proper polarity (+ to + and - to -). Most speaker wire is insulated, two-conductor, stranded construction and is color-coded or has some distinguishing feature differentiating the two conductors. Speaker wire connectors on most loudspeakers and amplifiers are also color-coded. It does not matter which conductor is connected to the positive or negative terminals of your equipment as long as you are consistent. [. . . ] All front channel models feature video shielding and a "floating" grille design that gives the speakers a handsome, contemporary style with minimal sonic interference. Flush mounted components and narrow front profiles are combined with time-aligned drivers and simple, minimum phase filter networks to provide truly extraordinary soundstaging. The rear soundfield, in a full surround system configuration, is provided by the Klipsch SS-1 Wide Dispersion Surround TechnologyTM speakers. These speakers contain an array of three drivers that flood the back of the listening room with high quality direct and reflected sound, providing both pinpoint rear channel imaging and ambient envelopment.
Speaker Placement
SYNERGY MAIN SPEAKERS
Both speakers should be placed on the same wall facing the listening area. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE KLIPSCH SF1BK
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual KLIPSCH SF1BK will begin.