Detailed instructions for use are in the User's Guide.
[. . . ] magicolor 4650EN/4650DN User's Guide
®
A00F-9561-00A 1800853-001A
Thank You
Thank you for purchasing a magicolor 4650EN/4650DN. Your magicolor 4650EN/4650DN is specially designed for optimal performance in Windows, Macintosh and Linux environments.
Trademarks
KONICA MINOLTA and the KONICA MINOLTA logo are trademarks or registered trademarks of KONICA MINOLTA HOLDINGS, INC. magicolor and PageScope are trademarks or registered trademarks of KONICA MINOLTA BUSINESS TECHNOLOGIES, INC.
All other trademarks and registered trademarks are the property of their respective owners.
Copyright Notice
Copyright © 2007 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC. , Marunouchi Center Building, 1-6-1 Marunouchi, Chiyoda-ku, Tokyo, 100-0005, Japan. This document may not be copied, in whole or part, nor transferred to any other media or language, without written permission of KONICA MINOLTA BUSINESS TECHNOLOGIES, INC.
Notice
KONICA MINOLTA BUSINESS TECHNOLOGIES, INC. [. . . ] Settings
THICK 2
-8-7
When printing on THICK 2 using manual duplex pass, correct the secondary image transfer current. Settings
POSTCARD
-8-7
When printing on POSTCARD using manual duplex pass, correct the secondary image transfer current. Settings
ENVELOPE
-8-7
When printing on ENVELOPE using manual duplex pass, correct the secondary image transfer current. Settings
LABEL
-8-7
When printing on LABEL using manual duplex pass, correct the secondary image transfer current.
GLOSSY Settings -8-7 1 When printing on GLOSSY 1
using manual duplex pass, correct the secondary image transfer current.
92
Configuration Menu Overview
GLOSSY Settings -8-7 2 When printing on GLOSSY 2
using manual duplex pass, correct the secondary image transfer current.
IMG ADJ THICK
CYAN
Settings
-5-0-5
When printing on thick paper, adjust the cyan in the image.
MAGENTA Settings
-5-0-5
When printing on thick paper, adjust the magenta in the image.
YELLOW Settings
-5-0-5
When printing on thick paper, adjust the yellow in the image.
BLACK
Settings
-5-0-5
When printing on thick paper, adjust the black in the image.
IMG ADJ BLACK SUPPLIES REPLACE
Settings
-2-0-2
When printing in grayscale, adjust the black in the image.
TRANS. Settings YES/NO BELT Reset the service life counter for the
transfer belt unit.
TRANS. Settings YES/NO ROLLER Reset the service life counter for the
transfer roller.
FUSER UNIT
Settings
YES/NO
Reset the service life counter for the fuser unit.
Configuration Menu Overview
93
QUICK SETTING
UPDATE SETTING
Setup
EXECUTE / CANCEL
Select whether or not to update the printer settings from the definitions file on the USB memory device. If CANCEL is selected, the settings are not updated.
BACKUP SETTING
Backup
EXECUTE / CANCEL
Select whether or not to save the printer settings information on a USB memory device. If EXECUTE is selected, the printer settings are saved on a USB memory device. If CANCEL is selected, the settings are not saved.
SERVICE MENU
With this menu, the service representative can adjust the printer and perform maintenance operations. This menu cannot be used by the user.
94
Configuration Menu Overview
Camera Direct
Camera Direct
If a digital camera with PictBridge (1. 0 or later) is connected to the printer through the Camera Direct Print port, images stored on the digital camera can be printed directly from the printer. For details on using the digital camera, refer to your digital cameras manual. - DPOF AUTOPRINT image print - Cropping print - Borderless - Print quality (printer setup) - Paper type (printer setup) - DPOF cable disconnect recovery
Printing Directly from a Digital Camera
1
From the printer's Camera Direct Menu, specify settings for Paper Source, Layout, Paper Margin and Image Quality. The Media Type setting that is used is the default printer setting that is selected. If these settings can be specified from the digital camera, they do not need to be specified from the control panel. These settings are overridden by settings configured within the digital camera. For details on control panel settings, refer to "CAMERA DIRECT" on page 65. Connect the USB cable to the digital camera and to the KONICA MINOLTA Digital Camera Direct Print Port. A USB cable is not included with the printer and must be purchased separatelly, if not supplied with your digital camera. From the digital camera, specify the image that you wish to print and the desired number of copies. Start printing from the digital camera.
2
3 4
96
Camera Direct
Memory Direct
Memory Direct
PDF, XPS, JPEG and TIFF files saved on USB memory devices can be printed by plugging the USB memory device into the printer. Memory direct can be used only if the optional hard disk kit or a CompactFlash card is installed. In order to perform collated printing with memory direct, the optional hard disk kit or a CompactFlash card of 1 GB or more must be installed. [. . . ] In addition, always handle circuit boards by the edges only.
1
Turn off the printer and disconnect the power cord and interface cables.
Hard Disk Kit
223
2
Using a screwdriver, remove the screw. Then, slide the rear cover to the right and remove it.
3
Using a screwdriver, loosen the seven screws. (Do not remove them from the printer. )
4
Slide the panel slightly to the right and lift it off the printer.
224
Hard Disk Kit
5
Plug the cable on the hard disk kit into the connector on the controller board.
6
Insert the three mounting pins on the hard disk kit into the holes in the controller board to mount the hard disk kit onto the controller board.
7 8 9
Reinstall the panel and tighten the seven screws. Reconnect all interface cables.
Hard Disk Kit
225
10
Reconnect the power cord, and turn on the printer.
11
Declare the Hard Disk in the Windows printer driver (Properties/Configure tab).
226
Hard Disk Kit
CompactFlash
If you install a CompactFlash card, the followings can be performed:
Collate printing Fonts forms download User Authentication/Account Track Direct printing (including the use of PageScope Direct Print) Only CompactFlash cards with a capacity of 256 MB, 512 MB, 1 GB, 2 GB or 4 GB can be used. [. . . ]