User manual KTM 65 SX
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual KTM 65 SX. We hope that this KTM 65 SX user guide will be useful to you.
You may also download the following manuals related to this product:
KTM 65 SX (2606 ko)
KTM 65 SX (2636 ko)
KTM 65 SX (2650 ko)
KTM 65 SX 2000 (3357 ko)
KTM 65 SX 2000 (3349 ko)
KTM 65 SX 2000 (3346 ko)
KTM 65 SX 2001 (4057 ko)
KTM 65 SX 2001 (4049 ko)
KTM 65 SX 2001 (4044 ko)
KTM 65 SX 2003 (3583 ko)
KTM 65 SX 2003 (3573 ko)
KTM 65 SX 2003 (3579 ko)
KTM 65 SX 2004 (3797 ko)
KTM 65 SX 2004 (3784 ko)
KTM 65 SX 2004 (3780 ko)
KTM 65 SX 2005 (5251 ko)
KTM 65 SX 2005 (5233 ko)
KTM 65 SX 2005 (5248 ko)
KTM 65 SX 2006 (4482 ko)
KTM 65 SX 2006 (4463 ko)
KTM 65 SX 2006 (4469 ko)
KTM 65 SX 2007 (4467 ko)
KTM 65 SX 2007 (4448 ko)
KTM 65 SX 2007 (4451 ko)
KTM 65 SX 2008 (4499 ko)
KTM 65 SX 2008 (4480 ko)
KTM 65 SX 2008 (4482 ko)
KTM 65 SX 2009 (2444 ko)
KTM 65 SX 2009 (2466 ko)
KTM 65 SX 2009 (2476 ko)
Manual abstract: user guide KTM 65 SX
Detailed instructions for use are in the User's Guide.
[. . . ] 3211345en
DEAR KTM CUSTOMER
DEAR KTM CUSTOMER
1
Congratulations on your decision to purchase a KTM motorcycle. You are now the owner of a state-of-the-art sports motorcycle that will give you and your child enormous pleasure if you service and maintain it accordingly. We wish you great pleasure riding the vehicle!
Enter the serial numbers of your vehicle below. 9)
The owner's manual corresponded to the latest state of this series at the time of printing. [. . . ] If the handlebar is bent or straightened it will cause material fatigue, and the handlebar can break. Always replace handlebar.
1 0 2 0
Remove the four screws . Remove the handlebar and lay it to one side.
Info
Protect the motorcycle and its attachments from damage by covering them. Guideline Screw, handlebar support M10 40 Nm (29. 5 lbf ft) Loctite® 243TM
Position the handlebar.
Info
0 2
Make sure cables and wiring are positioned correctly. Guideline Screw, handlebar clamp M8 20 Nm (14. 8 lbf ft)
Info
Make sure the gap width is even.
Checking the play in the throttle cable
9. 32
Move the handlebar to the straight-ahead position. It must be possible to raise the outer casing of the throttle cable away from the adjusting screw by distance without encountering a resistance. 0. 2 in)
If the throttle cable play does not meet specifications: Adjust the play in the throttle cable.
x(
p. Check the throttle grip for smooth operation.
Adjusting the play in the throttle cable
9. 33
x
Move the handlebar to the straight-ahead position. Turn the adjusting screw so that there is play at the outer casing of the throttle cable. Check the throttle grip for smooth operation.
700453-01
MAINTENANCE WORK ON CHASSIS AND ENGINE
Checking chain dirt
9. 34
32
Check the chain for coarse dirt accumulation. 32)
400678-01
Cleaning the chain
9. 35
Warning
Danger of accidentsOil or grease on the tires reduces their grip. Remove oil and grease with a suitable cleaning material.
Warning
Danger of accidentsReduced braking efficiency due to oil or grease on the brake discs. Always keep the brake discs free of oil and grease, and clean them with brake cleaner when necessary.
Warning
Environmental hazardHazardous substances cause environmental damage. Oil, grease, filters, fuel, cleaners, brake fluid, etc. , should be disposed of as stipulated in applicable regulations.
Info
The service life of the chain depends largely on its maintenance. 70) Offroad chain spray (
Checking the chain tension
9. 36
Warning
Danger of accidentsDanger caused by incorrect chain tension. If the chain is over tensioned, the components of the secondary power train (chain, engine sprocket, rear sprocket, bearings in transmission and rear wheel) are under additional load. Apart from premature wear, in extreme cases the chain may snap or the countershaft of the transmission can break. On the other hand, if the chain is loose, it may jump off the engine sprocket or the rear sprocket, causing the rear wheel to lock or damage the engine. 20)
Push the chain at the end of the chain sliding component upward to measure the chain tension .
Info
The upper chain section must be taut. Because chain wear is not always even, repeat this measurement at different chain positions. 34)
»
If the chain tension does not meet specifications: Adjusting chain tension - after checking. (
MAINTENANCE WORK ON CHASSIS AND ENGINE
Checking the chain tension - installing rear wheel
9. 37
33
Warning
Danger of accidentsDanger caused by incorrect chain tension. [. . . ] Supplier Motorex® Racing Fork Oil
Hydraulic fluid (15)
According to ISO VG (15) Guideline Use only hydraulic fluid that complies with the specified standards (see specifications on the container) and that possesses the corresponding properties. Supplier Motorex® Hydraulic Fluid 75
SUBSTANCES
Shock absorber oil (SAE 2. 5) (50180342S1)
According to SAE ( p. 72) (SAE 2. 5) Guideline Use only oils that comply with the specified standards (see specifications on the container) and that possess the corresponding properties.
69
Super unleaded gasoline, mixed with 2-stroke engine oil
According to DIN EN 228 JASO FC ( 1:60 p. 72) 2-stroke engine oil Super unleaded (ROZ 95 / RON 95 / PON 91) Mixture ratio
AUXILIARY SUBSTANCES
Air filter cleaner
Specification KTM recommends Motorex® products. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE KTM 65 SX
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual KTM 65 SX will begin.