User manual LIFT-MASTER AUXILARY LIMIT SWITCH

[. . . ] AUXILIARY LIMIT SWITCH Mini Switches MODEL: FDO APPLICATION REQUIREMENTS: This modification is available to models FDO A & B Operators. [. . . ] PREPARATION: Unpack kit to verify the parts listed below are included. Refer to installation instructions on reverse side for component mounting instructions. PACKING LIST K90-9210F1 PART NUMBER 82-PX08-10T 75-16800 96-WH24-68 DESCRIPTION SCREW, #8-32 x 5/8" SELF TAP BRACKET ASSEMBLY, FDO OPEN OR CLOSE WIRE, WHITE 24" 1/4" FORK x 3/16 FASTON QUANTITY 4 1 3 PACKING LIST K90-9210F2 PART NUMBER 82-PX08-10T 75-16801 96-WH24-18 96-BL24-18 DESCRIPTION SCREW, #8-32 x 5/8" SELF TAP BRACKET ASSEMBLY, FDO OPEN/CLOSE WIRE, WHITE 24" 1/4" FORK x 3/16 FASTON WIRE, BLUE 24" 1/4" FORK x 3/16 FASTON QUANTITY 4 1 3 3 INSTALLATION INSTRUCTIONS COMPONENT MOUNTING: 1. Locate the new auxiliary limit switch bracket assembly with the limit switch attached. Fasten the limit switch bracket down to the box using the three #8-32 x 5/8" long self tapping screws supplied (refer to component mounting illustration). Connect the wires from the auxiliary limit switch to the 10 pole terminal block (Refer to figure 2 and 3). NOTE: If electrical box does not have required slots, holes must be added. [. . . ] FIGURE 1: Open or Closed Auxiliary Switch AUXILIARY OPEN LIMIT SWITCH WARNING TO AVOID SERIOUS PERSONAL INJURY OR DEATH FROM ELECTROCUTION, DISCONNECT ELECTRIC POWER TO OPERATOR BEFORE INSTALLING. W FIGURE 2: Open and Closed Auxiliary Switch CAUTION AUXILIARY OPEN/ CLOSE LIMIT SWITCH AUXILIARY CLOSE LIMIT SWITCH TERMINAL BLOCK, 10 POLE TERMINAL BLOCK, 10 POLE COMPONENT MOUNTING NOTE: Components not shown in electrical box for ease of viewing. AUXILIARY LIMIT BRACKET ASSEMBLY (3) #8-32 X 5/8" LONG PAN HEAD SCREWS FIGURE 3 DRILL HOLE . 177 DIA. [. . . ]