User manual LUX N24

[. . . ] Everybody using the water purifier should be familiar with how to operate it and its safety features The manual should be kept and stay with the water purifier. If it is ever moved or changes owners, the user of the appliance should be able to read about the various functions and safety instructions. Vielen Dank, daß Sie unseren Wasseraufbereiter gewählt haben. Wir hoffen, daß Sie viele Jahre Freude an dem Gerät haben werden. [. . . ] One major advantage of reverse osmosis is that no chemicals are used during treatment. -5- Product description ON FILTER SERVICE CONTROL PANEL 8 6 9 10 1 2 3 4 7 5 6 2 3 11 7 12 1 2 3 4 5 6 Bracket for reject water hose Reject water hose Feed water hose Hose clip Angle bracket for pure water hose Pure water hose 7 8 9 10 11 12 Connection to the indicator light on the faucet Pure water faucet Indicator light Button Adapter for feed water hose Filter spanner -6- Using the water purifier When the water purifier has been installed and flushed according to the instructions, it is ready to be used. The water purifier has an electronic control system which makes it easy to use. Remember the following: q q Change the filter when filter replacement is indicated on the control panel (2 - 3 times/year). Clean the purifier when the flow has reduced by 50%. Production of pure water To start pure water production: q Press the button on the faucet once. The water purifier produces pure water until the button is pressed again. A. A q Indication The indicator lights on the control panel and the faucet indicate status and water quality. B: ON (green) FILTER (flashing yellow) FILTER (yellow) The purifier is connected. Emergency stop because filter replacement has not been carried out. B SERVICE (flashing yellow) Warning of deterioration in water quality. SERVICE (yellow) Emergency stop due to deterioration in water quality. ON FILTER SERVICE The indicator light on the faucet indicates the following, see fig. Control panel attracting your attention. It can take up to 120 seconds before good water quality is indicated on the pure water faucet. The water purifier is most efficient when producing pure water for longer periods, e. g. be supplied with a new filter, see «Replacing the filter». be flushed in order to wash out the preserving agent, in accordance with «Flushing». Don't forget to insert a new filter in the water purifier. q q - 11 - Maintenance Cleaning the grid The grid blocks larger particles and is situated in the feed water connection. If the flow is reduced or the purifier makes a noise, the grid may be blocked. Using pliers or similar, grip and pull out the grid in accordance with fig. Open the shut-off valve at the feed water and check that there is no leakage. G 5. 6. 7. The grid is now clean and the water purifier is ready to be used. Regular care of the water purifier Listed below are things you need to remember in the regular care of your water purifier. The points are listed according to how often they need to be performed: q Every day, check that the indicator lights are not indicating that something has to be attended. Once a month, check that all the connections are in place and watertight. After replacing a filter, stand the filter so that most of the water runs out over a few minutes. The filter can be discarded with normal household rubbish, as it does not contain any environmentally hazardous substances. q q Depending primarily on the hardness of the feed water and its content of micro-organisms, the water purifier should be descaled when the flow is reduced and disinfected if the water smells or tastes bad. [. . . ] 3. - 16 - Installation Water connection Feed connection: The water purifier is connected to cold water (2 - 40 °C) via the feed water hose. The connection should be supplied with an easily accessible shut-off valve, see fig. If the connection is with new pipes or pipes that have not been in use for an extended period, the water should be allowed to run for a while before the hose is connected in order to flush out sand and rust. Check that the black washer is in position in the connection on the feed water hose's straight end. [. . . ]