User manual MAKITA LM430D
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual MAKITA LM430D. We hope that this MAKITA LM430D user guide will be useful to you.
![]() |
Manual abstract: user guide MAKITA LM430D
Detailed instructions for use are in the User's Guide.
[. . . ] ¢ The distance between the tool and bystanders must be at least 15 m. 13
⢠Never put your hands and feet near the blade under the mower. ¢ Remove the lock key before inspecting, adjusting, cleaning, servicing, leaving and storing the mower. 14
Cd Ni-MH Li-ion
⢠Only for EU countries Do not dispose of electric equipment or battery pack together with household waste material! [. . . ] Do not store the tool and battery cartridge in locations where the temperature may reach or exceed 50°C (122°F). Do not incinerate the battery cartridge even if it is severely damaged or is completely worn out. Battery converters (optional accessory)
WARNING: ⢠Before installing or removing the battery converters BCV01/BCV02, remove the lock key. 3, 4 & 5)
WARNING: ⢠When using the BCV01, never attach it to any part of your body. Attaching the BCV01 to any part of your body may cause a serious injury. Slide the battery converter BCV01 into the installation hole until it stops. Open out the battery cover on the mower and then slide all the way and click the product mounting adapter of the BCV01 into the battery port on the mower. Run the cord of the BCV01 through the slit in the battery cover and close the battery cover. NOTE: ⢠When using the battery converter BCV01 (optional accessory), hook the power cord to the designated holder on the mower. To remove the BCV01 from the mower, open out the battery cover and then press the hook on the battery mounting side of the BCV01. Always stop tool operation and charge the battery cartridge when you notice less tool power. Charge the battery cartridge with room temperature at 10°C â 40°C (50°F â 104°F). Charge the battery cartridge once in every six months if you do not use it for a long period of time. 6 & 7)
Open the battery cover and click in the BCV02 into the battery port on the mower. To remove the BCV02, press on the hook of the BCV02 and withdraw it with both hands. 8 & 9)
WARNING: ⢠Before inserting the battery cartridge in the tool, always check to see that the switch lever actuates properly and returns to the original position when released. Operating a tool with a switch that does not actuate properly can lead to loss of control and serious personal injury. NOTE: ⢠Trying to mow much grass at a time may not allow the motor to start due to the overload. ¢ The mower does not start without pressing the switch button even if the switch lever is squeezed. If you notice anything unusual with either of these switches, stop operation immediately and have them checked by your nearest Makita Authorized Service Center. Battery protection system
Lithium-ion batteries are equipped with a protection system. This system automatically cuts off power to the tool to extend battery life. [. . . ] ⢠Wear gloves when performing inspection or maintenance. CAUTION: ⢠Never use gasoline, benzine, thinner, alcohol or the like. Turn mower on its side and clean grass clippings that have accumulated on the underside of mower deck. Donât store the mower and charger in locations where the temperature may reach or exceed 40°C (104°F). [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE MAKITA LM430D
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual MAKITA LM430D will begin.