User manual MAXI-COSI PRIORI XP

[. . . ] The seat belt must be threaded along the red markings on the Maxi-Cosi Priori XP. see the Installation section and/or the sticker on the side of the Maxi-Cosi Priori XP. â· WARNING: For the future use of the seat, it is important that you store the instruction manual in the space provided on the back of the Maxi-Cosi Priori XP. WARNING: Never use the Maxi-Cosi Priori XP on a seat equipped with a front airbag, as this can result in injury or death. [. . . ] Four positions of the Maxi-Cosi Priori XP The Maxi-Cosi Priori XP may be used in four positions: Lift the adjusting handle under the front of the seat up (03) and push or pull the seat forwards or backwards (04). Release the adjusting handle in the desired position and push until you hear a distinct click. Before installing the Maxi-Cosi Priori XP, pull the seat towards you as far as possible (sleeping position) (05). Installing the Maxi-Cosi Priori XP Please read the "Seat Belt" section before installing the Maxi-Cosi Priori XP. â· Place the Maxi-Cosi Priori XP on the car seat in the sleeping position (05). The belt tensioner should no longer be positioned between the red belt hooks (07). Make sure that the lap belt section of the seat belt is threaded between the red hooks and the belt tensioner (08). â· Fasten the seat belt in the belt buckle of the car (08) and check to ensure the car seat belt is not twisted. â· The lap belt should now run under the red seat belt hooks (09) and the shoulder belt should run from the car seat buckle directly diagonally upwards. Next, push the Maxi-Cosi Priori XP firmly into the car seat (11/2) whilst at the same time pulling the shoulder belt tight (11/3), so that the Maxi-Cosi Priori XP is securely in place. Now return the handle to its original position (click) making sure it rests against the base (12). The belt tensioner should now be positioned between both belt hooks on the lap belt (13). â· You can now adjust the shell of the Maxi-Cosi Priori XP into the desired position. If the cover on your seat has Velcro on the side seam on the back (28), you can leave the entire belt system in place in the shell. You only need to open the Velcro and then follow the instructions for removing the cover. Loosen the shoulder belts by pressing the release button and pulling the shoulder belts towards you (14). Position your child comfortably with his/her back against the shell (18) and make sure that there are no toys or other hard objects in the shell. â· Slide buckle tongue sections together and insert them into the buckle (19). Pull the shoulder belts tight (20/1) and pull the remaining slack out of the belt system by pulling the belts tight using the adjuster belt (20/2). The tighter the belts fit around your child, the better the protection. You should be able to fit only one finger between the belts and your child. â· The textured side of the belt pads must be placed on your child's shoulders. [. . . ] â· Check to make sure the Maxi-Cosi Priori XP is securely fastened with the seat belt and that the clamping handle is locked. â· Check to make sure the shoulder belts are at the proper height. â· Check to make sure your child is fastened securely and that the buckle is locked properly. If it is damaged, do not use the car seat under any circumstances and contact your supplier or importer (see address list on the back of the instruction manual). [. . . ]