User manual MAYTAG MAF9801
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual MAYTAG MAF9801. We hope that this MAYTAG MAF9801 user guide will be useful to you.
Manual abstract: user guide MAYTAG MAF9801
Detailed instructions for use are in the User's Guide.
[. . . ] Use & Care Guide Washing Machine MAYTAG MAF 9801
CONTENTS
READ FIRST 1 Before washing the first time 2 Safety instructions Page 3 4-5 programmes 11 Making own washing programmes Page 10 Consumption values - Pre-set washing 18 19-24
General. Child lock on Start/ Stop and Menu buttons.
4 Parts of the washing machine 5 Detergent compartment 6 Panel 7 LC Display INSTALLATION 7 7 8 8
General, Available settings and options, Create your own washing programmes, Interrupt input, Reset programme, Available types of programme, Menu system for altering pre-set programmes
CARE 12 Care and Cleaning 26-27
See instructions for installation.
WASHING 8 Before washing 9-11
Cleaning the coin trap and drain pump, Cleaning the detergent compartment, Cleaning the outside of the machine, Cleaning the inside of the machine to prevent problems with odour, Clean-out recess under the ridges. Wrong language on the display, Celsius or Fahrenheit, Reset programme
MISCELLANEOUS 14 Technical information 31 33 34 35
Washing, Washing step-by-step, Delayed start, Temporary spin drying or rinsing
Technical data. Standard tests.
15 Service and guarantee 16 Quick guide 17 Index
2
1 BEFORE WASHING THE FIRST TIME
CAUTION WITH CERTAIN MATERIALS CHECK HARDNESS OF THE WATER
Always check and adhere to recommended washing marking on the items concerned. [. . . ] Within 15 seconds of releasing the button, you must index forward with the Menu button to the new desired setting. In order to make an alteration, however, the part of the programme that you wish to alter must not have been activated yet. - Spin speed can be altered before the water is pumped out after the main wash. - Super rinse can be changed before pumping out the water after the main wash. - Anti-crease can be changed for the final spin.
The text on the lower edge of the display indicates that the programme is completed. Press the button, and a key will appear on the bottom edge of the display. The door will open after three seconds.
8
PROGRAMME COMPLETED
Turn off the main power switch . Close the washer door to prevent small children from crawling into the machine.
9
WHEN WASHING IS FINISHED
16
DELAYED START (1-24 HOURS)
TEMPORARY SPINNING OR RINSING
If Delayed start is set to 5 hours, for example, this means that the machine will start the programme 5 hours after you press the button. If you wish to delay the start of any programme temporarily, you should proceed as follows before pressing the button: 1. Index forward with the Menu button until Delayed start appears in the display. Delayed start is disconnected automatically at the end of the programme.
If you wish to run a temporary spin or rinse programme without altering P1 - P4 , you can do the following: 1. If you wish to have Spin or Rinse as one of the four pre-set programmes, see Chapter 11, Making your own washing programmes.
IMPORTANT
If you store a programme by mistake, you can reset it to its settings at the time of delivery; see Reset programme in Chapter 11, Making your own washing programmes.
17
10 CONSUMPTION VALUES - PRE-SET PROGRAMMES
The following conditions apply for the consumption values indicated below: Temperature of incoming water: 15ºC. Element power: 2000 W.
PROGRAMME
WASHING/ TEMPERATURE (1)
AMOUNT OF WASHING (2) 1/1 (6, 0 kg)
WATER CONSUMP- ENERGY CONSUMPTION (ca litre) 54 TION (ca kWh) 1, 14
PROGRAMME TIME (ca min. ) 130
P1 Normal P2 White/Coloured P3 Quick P4 Hand
Cotton, linen, 60 °C Cotton, linen, 40 °C Polyester, cotton/polyester, 40 °C Wool/Hand, IWS, Superwash, 30 °C
1/1 (6, 0 kg)
54
1, 05
90
1/2 (3, 0 kg)
22
0, 30
35
1/3 (2, 0 kg)
54
0, 30
40
(1) All programmes are set to the highest available spin speed. (2) The machine can handle a maximum load of 6, 0 kg.
18
11 MAKING OWN WASHING PROGRAMMES
GENERAL Change programme
We have preset P1 - P4 with the most common washing programmes. You can adjust the temperature and the spin speed temporarily, and you can run a spin or rinse programme temporarily without reading this Chapter; see Chapter 9, Washing. You can also create your own programmes to suit you and your washing needs even better. You can select a different type of programme, for example Heavy with pre-wash, Wool or Light. You can also alter settings such as temperature and spin speed and options such as Pre-soak, Delayed start and E2 Eco/Efficiency. Tables containing a description of all programme types, settings and options are included later in this Chapter.
In this Chapter we tell you how to replace one or other of the pre-set programmes with a programme of your own. By storing the programme, it will then be accessible simply by pressing a button every time you wish to use the washing machine.
Temporary programme
You can also make a temporary change of programme type, settings or options. The change is not stored in this case, but is deleted when you switch off the machine or when you select one of the pre-set programmes.
SETTINGS AND OPTIONS FOR THE FOUR PRE-SET PROGRAMMES AT THE TIME OF DELIVERY Programme information
type
Settings and options
ed sta rt (A) cy ficien level e oak Pre-s Anticreas °C rature
amme
Spin spe r/min ed
rinse
Progr
Delay
Super
E2 Ec o/Ef
Temp e
P1 P2 P3 P4
Normal White/Coloured Quick Hand (B)
60°C 40°C 40°C 30°C
1800 0 tim 1200 0 tim 800 800 0 tim 0 tim
Off Off Off Off
Off Off (B) (B)
Off Off Off Off
Off Off Off Off
(A) 0 hours means that the option is not activated. (C) This option is always on for this programme type and cannot be switched off.
High
water
Off Off Off (C)
WM5566-OPT
19
AVAILABLE SETTINGS AND OPTIONS
Setting/Option Programme types Description Available programmes are described in a separate table in this Chapter. [. . . ] flashes at the lower right corner of the If display it is an indication that you have attempted to start a programme with the door open. Close the door and try again.
WRONG LANGUAGE ON THE DISPLAY
If the language on the display becomes altered for any reason, it can be restored to the initial language again. The available languages are Dansk, Deutsch, English, Espanol, Français, Italiano, Nederlands, Norsk, Portugués, Suomi and Svenska. Proceed as follows to change the language: Turn the main switch, again. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE MAYTAG MAF9801
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual MAYTAG MAF9801 will begin.