User manual MINOURA RS-1200

[. . . ] RS-1200 instructions manual Thank you for purchasing the Minoura RS-1200 bicycle repair stand. [. . . ] Support Arm Seat-tube Support Hook Down-tube Support HOW TO ASSEMBLE RS-1200 1 Install the step-bar tubes to the frame and the leg. A) 2 Install the down-tube support arm to the main frame, then screw the knob bolt to the hole on the arm bracket. BB Support Front Wheel Support Stay Arm Angle Adjust Knob 3 Open the seat-tube stay and insert the seat-tube support hook and plug in the end-cap. Frame Leg HOW TO MOUNT YOUR BIKE ON RS-1200 ! Use RS-1200 ONLY on a flat and stable floor in order to prevent accidents. Step-bar (Fig. A) 1 Open the seat-tube support arm fully and set the left side crank arm towards the front wheel. . Place the BB shell onto the BB support, lean the bike backward until the seat-tube touches the hook, then adjust the downtube support arm angle by turning the knob bolt. 2 TIPS If the brake or shifter cable is routed under or beside the down-tube and is pinched between the frame and the bracket, use the supplied adapter. [. . . ] B) MINOURA JAPAN 1197-1 Godo, Anpachi, Gifu 503-2305 JAPAN Phone: +81-584-27-3131 / Fax: +81-584-27-7505 Email: minoura@minoura. jp / http://www. minoura. jp [. . . ]