User manual NORTEL NORSTAR
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual NORTEL NORSTAR. We hope that this NORTEL NORSTAR user guide will be useful to you.
Manual abstract: user guide NORTEL NORSTAR
Detailed instructions for use are in the User's Guide.
[. . . ] To disconnect one party: Press the line or intercom button of the caller you want to disconnect, then press . Press the line or intercom button of the remaining caller to resume your conversation. To independently hold two calls: Press the line or intercom button of the first caller, then press . To re-establish the conference, retrieve one call from hold, press <, then retrieve the second call from hold.
Contrast adjustment
Adjust the contrast of your display. [. . . ] Press to set your choice.
Dialing modes
Choose one of three methods of dialing. (Standard Dial is always available, even when another dialing mode is selected. ) Automatic Dial: Dial the number without choosing a line button first. Pre-Dial: Dial the number, then press a line button to place the call. Edit the number by pressing before placing the call.
Do Not Disturb Group Listening Hold
fi
Cancel fi
When you are not on a call, to prevent all incoming calls, except priority calls, from ringing at your telephone. When you are on a call, block an incoming priority call.
,
Cancel ,
Use both the handset and speaker while you are on a call. To avoid electronic feedback, keep the handset away from the speaker during the call, and press to hang up.
Temporarily suspend a call. To retrieve a held call, press the button next to the flashing indicator. (Press on the NORSTAR telephone. ) Exclusive Hold
or Temporarily suspend a call and prevent other telephones from picking it up.
Language Choice
fi, /
Select English as the language for the telephone display.
fi,
Select French as the language for the telephone display.
fi, <
Select Spanish as the language for the telephone display.
Last Number Redial Line pools
fi
Automatically redial the last external telephone number that you dialed.
fl>
With a line pool, telephones can share several lines for making calls. (See your system coordinator for a list. )
Line Redirection
>
Cancel >
Send calls arriving on an external line to another telephone outside your Norstar system. See your system coordinator. ) This feature is not available on the NORSTAR telephone.
Link Long Tones
/
Generate a Link signal to access a PBX or other host exchange.
,
Generate a tone for as long as you hold down a button. Ringing service
/
Cancel /
Turn on one of six schedules for alternative ringing/call answering arrangements from a designated control telephone. Restriction services
Cancel
Turn on one of six schedules for alternative restrictions on particular lines or telephones from a designated control telephone. Routing services
<
Cancel <
Turn on one of six schedules for alternative routing on particular lines or telephones from a designated control telephone. You are required to enter the System Coordinator password.
Speed Dial
,
Dial an external telephone number using a two-digit code. There are two types of speed dial codes: system (01 to 70) and personal (71 to 94). System speed dial codes can be used from any Norstar telephone in the system. Enter the two-digit code for the number (01 to 70 for system speed dial, 71 to 94 for User Speed Dial).
Page 7
To program User Speed Dial numbers: 1. Specify the external line by pressing a line button, a line pool button, or the intercom button. If you don't specify the line, the system automatically chooses a line for the call. You cannot program User Speed Dial numbers while someone else is programming your Norstar system.
System Answer Test a telephone Time
</
Turn System Answer on or off. [. . . ] You cannot program User Speed Dial numbers while someone else is programming your Norstar system.
System Answer Test a telephone Time
</
Turn System Answer on or off. You must enter the System Coordinator or Basic password.
, fi
Test the telephone display, buttons, speaker, handset or headset (if available) and power supply. See the System Coordinator Guide for further instructions.
, <
Briefly display the time and date while you are on a call.
, fl
Time & date
Cancel , fl
Replace message or call information on the display with the time and date.
~
Enter a password provided by your system coordinator to change the time and date on all sets with a display in your Norstar system.
Transfer
,
Send a call to another telephone within your Norstar system, or to an external telephone. You may not be able to transfer a call on an external line to an external telephone, depending on the capabilities of the lines. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE NORTEL NORSTAR
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual NORTEL NORSTAR will begin.