User manual RAZER COPPERHEAD

[. . . ] Undoubtedly, the Razer CopperheadTM will be the new benchmark in competitive gaming and you're at the helm of this technological revolution. We know you're bustin' at your chops to put this baby through the rigors of gameplay. But before you do so, take some time to go through this Master Guide in order to unleash the maximum potential of your Razer Copperhead's capabilities. Com for the latest news, product and driver announcements to stay ahead of the game. [. . . ] independent X and Y-axis Settings You can preset independent X-axis (sensitivity movements side to side) and Y-axis (sensitivity movements up and down). When this feature is enabled you will see a new on-the-fly interface bar when enacted on their screen that allows further sensitivity adjustments. RESETTING TO FACTORY DEFAULT To reset the Razer CopperheadTM to factory default, press and hold the Profile Button for 20 seconds while the Razer CopperheadTM is connected to a powered on computer. However, using it other than that prescribed herein puts the user at risk of hazardous radiation exposure. In order to achieve maximum safety while using your mouse, we suggest that you adopt the following guidelines: 1. Avoid looking directly into the laser beam of your mouse or pointing the beam in any one else's eye. Note that the laser beam is NOT visible to the naked human eye and is set on an always on mode. Should you have trouble operating the mouse properly and troubleshooting does not work, unplug the device and contact the Razer hotline or go to www. Do not take apart the mouse (doing so will also void your warranty) and do not attempt to service it yourself or operate it under abnormal current loads. Operate your mouse only within the specified temperature range of 0°C(32°F) to 40°C(104°F). Should you operate it in a temperature that is beyond this range, unplug and switch off the device in order to let the temperature stabilize within the optimal temperature range. Here are some tips to ensure that you are comfortable while using your mouse. Research has shown that long periods of repetitive motion, improper positioning of your computer peripherals, incorrect body position, and poor habits may be associated with physical discomfort and injury to nerves, tendons, and muscles. Please follow these guidelines to ensure comfortable use of your mouse and avoid injury. Position your keyboard and monitor directly in front of you with your mouse next to it. Place your elbows next to your side, not too far away and your mouse within easy reach. Adjust the height of your chair and table so that the keyboard and mouse are at or below elbow height. Keep your feet well supported, posture straight and your shoulders relaxed. If you do the same tasks with your hands repeatedly, try not to bend, extend or twist your hands for long periods. Use a wrist support such as Razer's gel-filled eXactRestTM to support your wrist while gaming. Customize the buttons on your mouse to suit your style of gaming in order to minimize repetitive or awkward motions while gaming. Get up, step away from your desk and do exercises to stretch your arms, shoulders, neck and legs. [. . . ] The above limitations will not apply in case of personal injury where and to the extent that applicable laws require such liability. 227-7202-1 through 27-72044 (June 1995), or any successor regulations, this Software is provided to U. FCC DECLARATION OF CONFORMANCE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ]