User manual ROCKTRON SILVERDRAGON

[. . . ] For more information about other Rocktron products, please see your local dealer or one of our importers closest to you (listed on the Rocktron website - www. rocktron. com). Precautions Read all instructions contained in this manual. Clean with dry cloth Copyright © 2004 GHS Corporation All Rights Reserved. Precautions Continued. . . . Do not block any ventilation openings (if applicable). Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat. [. . . ] Turning the knob counter-clockwise will decrease the amount of treble. 5 Roar Control - This control is a "global" control and adjusts the overall bass frequencies. 7 Slayer Intensity Control - This control changes the "character" of the attack properties magnifying string attack. This control is only available when the Slayer mode is selected using the footswitch (see point 10)Turning the control clockwise will increase the amount of Intensity. Turning the control counterclockwise will decrease the amount of Intensity. 8 Slayer Breath Control - This control adjusts the symmetry off-set of the distortion. This control is only available when the Slayer mode is selected using the footswitch (see point 10). Turning the control clockwise increases the symmetry off-set of the distortion. Turning the control counter-clockwise decreases the symmetry off-set of the distortion. Descriptions Continued 9 Level Control - This control is a "global" control and adjusts the overall output of the pedal. Turning this control clockwise will increase the output level of the pedal. Turning this control counter-clockwise will decrease the output level of the pedal. . AC13V Input - Plug the included 13-Volt AC adapter to power the Silver Dragon. Input - Using a standard guitar cable with a 1/4" jack, plug your guitar into this jack. Output - Using a standard guitar cable with a 1/4" jack, plug into your amplifier. [. . . ] If you turn the Breath control full counter clockwise the distortion will be symmetrical. As you turn the Breath control clockwise the negative portion will begin to increase in size, this causes the negative portion to begin distorting before the positive portion thus creating asymmetrical distortion. This is what adds the "character" or "feel" in many expensive tube amplifiers. [. . . ]