User manual SUNBEAM SNV11CBRB
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SUNBEAM SNV11CBRB. We hope that this SUNBEAM SNV11CBRB user guide will be useful to you.
Manual abstract: user guide SUNBEAM SNV11CBRB
Detailed instructions for use are in the User's Guide.
[. . . ] [. . . ] Do not vacuum areas which contain moisture or water and inflammable matter, needles, pins, razor blades, matches, cigarette-ends, etc. , since they may damage the cleaner or dust bag, or cause a fire. When rewinding the cord, hold the plug body before pressing the cord rewind button to prevent whipping. This product includes a cable which, if damages, must be replaced by a repair shop authorized by the manufacturer since special tools are required.
· · · · ·
3
DESCRIPTION AND OPERATION
HOSE CONNECTION
Connecting the hose: insert hose firmly into the hose inlet. You will hear it click into place.
Disconnecting the hose: press the button and pull the hose out of the vacuum cleaner.
SUCTION CONTROL
The suction control at the hand grip enables you to control suction power.
PIPE CONNECTION
Connecting the nozzle: holding the tubes and handle, insert the narrowed section into the wide section.
WIDE SUCTION NOZZLE
Use the vacuum head for cleaning both carpeted and uncarpeted floor.
4
DESCRIPTION AND OPERATION
ON/OFF SWITCH
Press the ON/OFF switch to power on or off.
CORD REWIND BUTTON
Press the cord rewind button to rewind the power cord.
DUST METER
Change the dust bag when the dust meter displays RED.
CREVICE NOZZLE
Attach crevice nozzle to the end of the hose for detail cleaning.
5
DESCRIPTION AND OPERATION
STORAGE
Hook the vacuum head to the body using the built-in clip to store the cleaner.
PRACTICAL PARKING
Hook the vacuum head to the body using the built-in clip when you temporarily stop vacuuming.
6
CLEANING THE FILTER
1
2
Turn off the cleaner.
Open the cover.
3
4
Remove the filter.
Shake the dust out of the filter.
5
6
Replace the filter.
Close the cover.
7
CHANGING THE DUST BAG
1
Turn off the cleaner and open the cover.
2
Hold the cover while removing the dust bag from the dust bag holder.
3
Insert the new dust bag into the dust bag holder properly, as shown in the picture.
Note: If no dust bag has been placed into the dust bag holder, the cover can not be closed.
8
USING THE VACUUM IN THE SHOULDER MODE
1
2
Assemble the clips.
Vacuum.
BEFORE ASKING FOR SERVICE
Before asking for service, please check each item below if you have trouble with your cleaner.
PROBLEM Suction power is weak.
CHECK POINT Dust bag Pipe or hose Power cord ON/OFF switch
MEASURE If dirt bag is dirty, replace it. [. . . ] [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SUNBEAM SNV11CBRB
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SUNBEAM SNV11CBRB will begin.