Detailed instructions for use are in the User's Guide.
[. . . ] TOSHIBA
U S E R ' S M A N UA L
71 4 0 C T / 7 2 0 0 C T
Model
R
Copyright
© 1999 by Toshiba Corporation. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of Toshiba. No patent liability is assumed, with respect to the use of the information contained herein. Portégé 7140CT/7200CT Portable Personal Computer User's Manual First edition December 1999
Disclaimer
This manual has been validated and reviewed for accuracy. [. . . ] The SYSTEM SETUP screen is displayed when you execute the file TSETUP. EXE, which is stored in the Windows subdirectory on your hard disk. If the supervisor password is set and you log onto the computer with the user password, you cannot access the TSETUP program.
User's Manual
Setup and Password Security 7-1
Executing TSETUP
1. The TSETUP screen is divided into two pages SYSTEM SETUP (1/2) and SYSTEM SETUP (2/2).
MEMORY Total PASSWORD Not Registered BATTERY Battery Save Mode SYSTEM SETUP (1/2) ACPI BIOS version = x. xx DISPLAY Power On Display = Auto-Selected = 65536 KB LCD Display Stretch = Disabled TV Config. = Full Power OTHERS Power-up Mode = Boot CPU Cache = Enabled Level 2 Cache = Enabled Processor Serial Number = Disabled Auto Power On = Disabled Alarm Volume = High System Beep = Enabled
PERIPHERAL Pointing Devices = Auto-Selected Ext Keyboard "Fn" = Disabled USB Legacy Emulation = Disabled Parallel Port Mode = ECP Hard Disk Mode = Enhanced IDE (Normal) BOOT PRIORITY Boot Priority = FDD®HDD®CD-ROM®LAN Power On Boot Select = Enabled
CONFIGURATION Device Config. I/O PORTS Serial Built-in Modem Parallel PCI BUS PCI BUS
SYSTEM SETUP (2/2) ACPI BIOS version = x. xx PC CARD Controller Mode = Auto-Selected = All Devices = COM1(3F8H/IRQ4) = COM2(2F8H/IRQ3) = LPT1(378H/IRQ7/CH3) DRIVES I/O HDD = Primary IDE(1F0H/IRQ14) Dock = Secondary IDE(170H/IRQ15) FLOPPY DISK I/O Floppy Disk = (3F2H/IRQ6/CH2)
= IRQ11
The system setup screen
: Select items pages Space, BkSp : Change values PgDn, PgUp : Change
Esc : Exit without saving Home : Set default values End : Save changes and Exit
The TV Config. and Dock items appears only when an optional DVD Dock II is connected in the computer. The Panel Power On/Off item appears only when the computer is in Resume mode.
7-2 Setup and Password Security
User's Manual
Changing values in the TSETUP menu
1. On either page, you can go directly to a specific group by pressing the first letter (highlighted) of the group's name. For example, press B to go to the Battery group.
Accepting changes and exiting SYSTEM SETUP
1. If the changed item does not require the system to reboot, the following message is displayed: Are you sure?(Y/N) If the changed item requires the system to reboot, the following message is displayed: Are you sure?TSETUP asks you to confirm that you don't want to save your changes.
Default configuration
When you access TSETUP, the current configuration is displayed. When you execute the default setting, the following settings are not changed: · Hard Disk Mode · Password · Write Policy
User's Manual
Setup and Password Security 7-3
TSETUP options
The SYSTEM SETUP screen is divided into functionally related groups. Most functions described in this section can also be changed using Toshiba's Hardware Setup or Power Saver Utility in Windows. The I/O port, IRQ and DMA channel are set in Windows 95/98 Device Manager. First page of TSETUP
Memory
This group displays the system's total memory.
Password
This option allows you to set or reset the user password for power on and instant security. The user password has not been registered.
If the supervisor password has been registered, it must be entered to access this and other TSETUP functions. For details on setting the password, refer to the Password security section later in this chapter.
Battery
These options let you set battery save functions for optimum performance or battery power conservation.
7-4 Setup and Password Security
User's Manual
Battery Save Mode
This option is used to select Full Power, Low Power or User Setting of the BATTERY SAVE OPTIONS. (Default)
BATTERY SAVE OPTIONS Processing Speed CPU Sleep Mode Display Auto Off HDD Auto Off System Auto Off LCD Brightness = = = = = = High Enabled 30Min. Disabled Bright (W/Battery power) or Super-Bright (W/External power) = Performance
Cooling Method
Low Power
The following shows low power settings:
BATTERY SAVE OPTIONS Processing Speed CPU Sleep Mode Display Auto Off HDD Auto Off System Auto Off LCD Brightness = = = = = = Low Enabled 03Min. Semi-Bright* (W/Battery power) or Bright (W/External power) = Quiet
Cooling Method
In boot mode, System Auto Off is not displayed. User Setting This option, allows you to set the battery save parameters on the sub-window, BATTERY SAVE OPTIONS. [. . . ] window: A portion of the screen that can display its own application or document. write protection: A method for protecting a diskette (floppy disk) from accidental erasure.
Glossary 14
User's Manual
Index
Battery Pack installing, 6-10 Battery packs additional, 8-7 Boot mode, 3-11. See Power-up modes
A
AC adaptor connecting, 3-5 AC adaptor, 1-3, 2-12 15 VDC port, 2-5 additional, 1-10, 8-7 AccuPoint II, 2-8, A-5 problems, 9-11 Alarm volume, 5-5 ASCII characters, 5-8, G-1 Auto power on, 1-7 Automatic power off, 1-6
C
Cache memory CPU cache, 1-2 Certification, A-9 Certification agencies, B-1 Cleaning the computer, 4-5 Computer cleaning, 4-5 moving, 4-5 Conventions, xiv Cooling, 1-8 CPU Cache, 7-10
B
Back side, 2-5 Battery. See also Battery pack charging, 6-5 charging notice, 6-6 charging time, 6-5 extending life, 6-8 indicator, 6-2 lock, 2-6 main, 6-3 monitoring capacity, 6-6 problems, 9-6 real time clock, 6-4 release, 2-6 RTC battery, 1-2 safety precautions, 6-4 save mode, 1-7. [. . . ]