User manual TOYOTA RS2000B
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual TOYOTA RS2000B. We hope that this TOYOTA RS2000B user guide will be useful to you.
You may also download the following manuals related to this product:
TOYOTA RS2000B (3790 ko)
TOYOTA RS2000B (3813 ko)
TOYOTA RS2000B (3774 ko)
Manual abstract: user guide TOYOTA RS2000B
Detailed instructions for use are in the User's Guide.
[. . . ] The types are shown on the model label as follows: MODEL/MODELE(MODEL NAME) SERIES/SERIE RS SERIES/SERIE RS2000 SERIES/SERIE RS2000A SERIES/SERIE RS2000B SERIES/SERIE
Model label
When calling for service, please note the MODEL and SERIES numbers that are inscribed on the back of your sewing machine.
MODEL number
SERIES number
1
CONTENTS
I. Before use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Important safety instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . How to change the power plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Application of each stitch pattern
Do not turn the pattern selection dial while operating the sewing machine. Doing so could cause an injury.
Attention
The number of stitch patterns may differ from model to model. The model number is located on the model label on the back of the sewing machine. (MODEL ***)
21 Stitch programs --- MODEL XXX21, XXX17, XXX04, 7140, SA45 18 Stitch programs --- MODEL XXX18, CB02, STF91 16 Stitch programs --- MODEL XXX16, CB01, 7120
Turn the handwheel towards yourself to raise the needle to the highest position. Stitch Applications Stitch programs 21 18 16 1/2/3/4 Buttonhole 15 Stretch fabric blind hem stitch 16 Thin fabric straight stitch 6/7/8 Straight stitch Zipper sewing 9/10/11 18 Fagoting -- 17 Straight stretch stitch (secure sewing) -- Decorative stitch Overcasting Stitch Applications Stitch programs 21 18 16
5
Zigzag sewing Applique Overcasting
12 Blind hem stitching
19 Overcasting Overlock 20 Smocking ---- ----
13
Mending stitch Thin fabric overcastting
14 Fagoting/Casing Decorative stitch
21 Decorative stitch Double overlock ----
20
Sewing preparations
9. Changing the presser foot
Before changing the presser foot, remove the power plug from the outlet. Turn the handwheel towards yourself to raise the needle.
Press the presser foot holder lever in the direction of the arrow to release the presser foot
21
Sewing preparations
Installation
Position the presser foot pin directly below the groove in the presser foot holder.
Lower the presser foot lever to set the presser foot.
22
Sewing preparations
10. Changing the needle
Before changing the needle, remove the power plug from the outlet. Turn the handwheel towards yourself to raise the end of the needle higher than the needle plate. Hold the needle in one hand, loosen the needle clamp screw with the accessory needle plate screw driver, and remove the needle. Face the flat surface of the needle to the rear and insert until it makes contact with the pin. Firmly tighten the needle clamp screw with the needle plate screw driver.
Correct needle selection
Note : If a faulty needle is used not only will it impair the sewing performance, but it could also damage the metal plate or hook, or break the needle. * If a stitch is missed or the thread breaks, first try replacing the needle.
23
Sewing preparations
11. Relationship between the needle, thread and fabric, and adjusting the sewing machine
The quality of the sewing finish will improve if the needle and thread are changed to match the type of fabric. Follow the directions in the table below.
Use a ball point needle for the sewing alignment of stretch fabric. Please purchase any needles not included as accessories, after checking they are specifi ed as home-use sewing machine needles. Refer to P. 30 [Adjusting thread tension] for how to adjust thread tension. The higher the thread number is, the thread gets thinner.
24
Sewing
III. Straight stitching and reverse sewing
Reverse sewing is performed at the beginning and end of sewing to prevent the thread from unraveling.
Do not pull the fabric excessively while sewing. Doing so could break the needle and cause an injury.
Straight stitch
1. Step on the foot controller to begin sewing.
End of sewing
After finishing sewing, turn handwheel towards yourself until the needle is in the highest position. Raise the presser foot and pull out the fabric to the rear.
25
Sewing
Thread cutter on the needle bar
* The thread cutter may differ from model to model. [. . . ] Note 2: Use the oil supplied with your machine or special oil for sewing machines. Hook installation
The hook is installed by reversing the removal procedures.
Replace the shuttle hook.
Align the projection of the shuttle hook cover with the depression of the hook, and install the shuttle hook cover.
Close the left and right stoppers to the inside. (in the direction of the arrow)
Hold the latch of the bobbin case and insert the bobbin case into the shuttle race. The bobbin case finger must slot into the groove.
48
Maintenance
3. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE TOYOTA RS2000B
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual TOYOTA RS2000B will begin.