User manual TYAN TEMPEST I5000VS

[. . . ] Tempest i5000VS /// Version 1. 1 S5372 Copyright Copyright © TYAN Computer Corporation, 2006. No part of this manual may be reproduced or translated without prior written consent from TYAN Computer Corp. Trademark All registered and unregistered trademarks and company names contained in this manual are property of their respective owners including, but not limited to the following. Intel, Blackford-VS, and combinations thereof are trademarks of Intel Corporation. Phoenix, Phoenix-AwardBIOS are trademarks of Phoenix Technologies. Notice Information contained in this document is furnished by TYAN Computer Corporation and has been reviewed for accuracy and reliability prior to printing. [. . . ] Interleave / Sequential / Mirror Branch 0 Rank Sparing This option is used to enable/disable Branch 0 rank/DIMM sparing feature. Enabled / Disabled Enhanced x8 Detection This feature is used to enable/disable enhanced x8 DRAM UC error detection. Enabled / Disabled Force ITK Config Clocking This feature is used to enable/disable FBD configuration for ITK test suite. Enabled / Disabled WatchDog Mode This feature allows you to enable the watchdog function. POST: Watchdog timer counting, start at Power on, stop at OS Boot OS: Start at OS Boot Power on: Start at power on Disabled / POST / OS / Power on Watchdog Timer This feature allows you to enable watchdog timer. 2 Mins / 4 Mins / 6 Mins / 8 Mins /10 Mins Enable Multimedia Timer This feature is used to enable/disable Multimedia Timer support. Yes / No Parallel ATA This feature is used to enable the PATA function. Enabled / Disabled Serial ATA This feature is used to enable the SATA function. Enabled / Disabled 46 Native Mode Operation This feature is used to choose Native Mode for ATA. Auto / Serial ATA SATA Controller Mode Option This feature is used to select SATA controller mode. In "compatible mode", SATA and PATA drives are auto-detected and placed in Legacy mode. In "Enhanced (non-AHCI) mode", SATA and PATA drives are auto-detected and placed in Native IDE mode. Compatible / Enhanced (non-AHCI) 3. 3. 1. 1 ICH USB Control Sub-Menu These items are used to control the various ICH USB devices. Main PhoenixBIOS Setup Utility Advanced Security Power ICH USB Control [Enabled] [Enabled] [Enabled] [Enabled] Boot Exit Item Specific Help USB ­ Device 29, All Function: USB ­ Device 29, F1, F2 and F3: USB ­ Device 29, F2 and F3: USB ­ Device 29, Function 7: F1 Help Esc Exit ¡ö ¡ôõ ¡÷ Select Item Select Menu -/+ Change Values Enter Select Sub-Menu F9 Setup Defaults F10 Previous Values USB Device 29, All Function Enable or Disable all USB devices by setting item to the desired value. Enabled / Disabled USB Device 29, F1, F2 and F3 Enable or Disable these 3 USB functions by setting item to the desired value. Enabled / Disabled USB Device 29, F2 and F3 Enable or Disable these 2 USB functions by setting item to the desired value. Enabled / Disabled USB Device 29, Function 7: Control USB 2. 0 functionality through this Setup Item. Enabled / Disabled 47 3. 3. 1. 2 Slot PCI-E (x4 Port) Sub-Menu These items are used for PCI Express Root Port #1 control options. PhoenixBIOS Setup Utility Advanced Security Power Slot PCI-E (x4 Port) Sub-Menu [Auto] = Yes = x0 = No Main Boot Exit Item Specific Help PCI-E Port 1 Port #1 Enabled Port #1 Width Port #1 Slot Card Detech F1 Help Esc Exit ¡ö ¡ôõ ¡÷ Select Item Select Menu -/+ Change Values Enter Select Sub-Menu F9 Setup Defaults F10 Previous Values PCI-E Port 1 This feature is used to enable/disabled the PCI-E root port. 3. 3. 1. 3 Slot PCI-E (x8 Port) Sub-Menu These items are used for PCI Express Port control options. PhoenixBIOS Setup Utility Advanced Security Power Slot PCI-E (x8 Port) Sub-Menu = Yes = x0 = No Main Boot Exit Item Specific Help Port #2 Enabled Port #2 Width Port #2 Slot Card Detech F1 Help Esc Exit ¡ö ¡ôõ ¡÷ Select Item Select Menu -/+ Change Values Enter Select Sub-Menu F9 Setup Defaults F10 Previous Values 48 3. 3. 1. 4 A Lan Control Sub-Menu These items allow you to control the LAN devices. PhoenixBIOS Setup Utility Advanced Security Power LAN Control Sub-Menu [Enabled] [Disabled] [Enabled] [Disabled] [Enabled] [Disabled] Main Boot Exit Item Specific Help LAN1 (Gilgal) Option ROM Scan: LAN2 (Gilgal) Option ROM Scan: LAN3 (82551) Option ROM Scan: F1 Help Esc Exit ¡ö ¡ôõ ¡÷ Select Item Select Menu -/+ Change Values Enter Select Sub-Menu F9 Setup Defaults F10 Previous Values LAN1 (Gigal)/LAN2 (Gigal)/LAN3 (82551) This feature is used to enable/disable the integrated LAN interface. Enabled / Disabled Option ROM Scan This option allows you to initialize the device expansion ROM. Disabled / Enabled 49 3. 3. 2 Advanced Processor Options This section allows you to fine-tune the processor options. PhoenixBIOS Setup Utility Advanced Security Power Advanced Processor Options [Enabled] [Enabled] [Enabled [Disabled] [Disabled] [Enabled] Main Boot Exit Item Specific Help Hyperthreading: C1 Enhanced Mode No Execute Mode Mem Protection Set Max Ext CPUID = 3 Discrete MTRR Allocation Intel EIST support F1 Help Esc Exit ¡ö ¡ôõ ¡÷ Select Item Select Menu -/+ Change Values Enter Select Sub-Menu F9 Setup Defaults F10 Previous Values Hyperthreading Enable this only if you have an Intel Hyper Threading processor. Hyper-Threading Technology enables multi-threaded software applications to execute threads in parallel. Hyper-Threading Technology provides thread-levelparallelism (TLP) on each processor resulting in increased utilization of processor execution resources. [. . . ] Striping: see RAID 72 UltraDMA-33/66/100: a fast version of the old DMA channel. Without proper UltraDMA controller, your system cannot take advantage of higher data transfer rates of the new UltraDMA/UltraATA hard drives. This one port type can function as a serial, parallel, mouse, keyboard or joystick port. It is fast enough to support video transfer, and is capable of supporting up to 127 daisy-chained peripheral devices. [. . . ]