User manual TYAN THUNDER I7525

[. . . ] Thunder i7525 (S2676) User's Manual Thunder i7525 /// Revision 1. 01 S2676 Copyright © TYAN Computer Corporation, 2004-2005. No part of this manual may be reproduced or translated without prior written consent from TYAN Computer Corp. All registered and unregistered trademarks and company names contained in this manual are property of their respective owners including, but not limited to the following. TYAN, Thunder i7525 and (S2676) are trademarks of TYAN Computer Corporation. [. . . ] Set the mode for the parallel port. Mode: Base I/O Address: ECP EPP Bi-directional Output only 378 41 http://www. tyan. com Set the base I/O address Thunder i7525 (S2676) Interrupt: DMA channel: 278 3BC IRQ5 IRQ7 DMA1 DMA3 for the parallel port. Set the DMA channel for the parallel port. 4. 3. 14 Advanced Submenu PCI Configuration ?? PCI PCI PCI PCI PCI PCI Express x16: Device, Slot #1 Device, Slot #2 Device, Slot #3 Device, Slot #4 Device, Slot #5 [Auto] PCI/PNP IRQ Exclusion Setup Item PCI Express x16 Selections (Default values are in bold) Auto Disabled Enabled Item Specific Help Configures the Express x16 Slot: PCI [Auto] BIOS configures the slot. Configuration of the 42 http://www. tyan. com PCI Device, Slot #1 PCI Device, Slot #2 PCI Device, Slot #3 - Thunder i7525 (S2676) PCI Device, Slot #4 PCI Device, Slot #5 PCI/PNP Exclusion IRQ - Specific PCI device. Reserve specific IRQs for use by legacy devices. 4. 3. 15 Advanced PCI Configuration Submenu PCI Device, Slot #x Option ROM Scan: Latency Timer: [Enabled] [Default] Setup Item Option ROM Scan: Latency Timer: Selections (Default values are in bold) Enabled Disabled Default 0020h 0040h 0060h 0080h 00A0h 00C0h 00E0h PCI Configuration Item Specific Help Initialize device expansion ROM. Minimum guaranteed time slice allotted for bus master in units of PCI bus clocks. 4. 3. 16 Advanced Exclusion Submenu PCI/PNP IRQ IRQ3: IRQ4: IRQ5: IRQ7: IRQ10: 43 http://www. tyan. com [Available] [Available] [Available] [Available] [Available] Thunder i7525 (S2676) IRQ11: [Available] Setup Item IRQ3 Selections (Default values are in bold) Available Reserved Available Reserved Available Reserved Available Reserved Available Reserved Available Reserved Item Specific Help Reserves the specified IRQ for use by legacy devices. Reserves the specified IRQ for use by legacy devices. IRQ4 IRQ5 IRQ7 IRQ10 IRQ11 4. 4 ­ Security Menu Setup Password User Password Set Setup Password: Set User Password: Password on boot: Start from Floppy: Start from IDE CD-ROM: Setup Prompt: Fixed disk boot sector: Write on Flexible Disks: BIOS Write Protect: 44 http://www. tyan. com Not Installed Not Installed [Enter] [Enter] [Disabled] [Enabled] [Enabled] [Enabled] [Normal] [Disabled] [Disabled] Thunder i7525 (S2676) Cabinet Monitoring: Trusted Platform Module: [Disabled] [Disabled] Setup Item Setup Password User Password Set Setup Password: Selections (Default values are in bold) `Installed' or `Not Installed' `Installed' or `Not Installed' Enter Item Specific Help Setup Password controls access to the setup utility. Use at least 4 characters for the password; otherwise the system can be tampered easily. Use at least 4 characters for the password; otherwise the system can be tampered easily. Display setup entry prompt on boot; disabled Set User Password: Enter Password on boot: Start from Floppy: Disabled Enabled Enabled Disabled Start from ROM: IDE CD- Enabled Disabled Setup Prompt: Enabled Disabled 45 http://www. tyan. com Thunder i7525 (S2676) Fixed disk boot sector: Normal Write Protect Unlocked Locked Write Disks: on Flexible doesn´t prevent setup entry. Allows to enable the Trusted Platform Module (TPM). BIOS Write Protect: Disabled Enabled Disabled Enabled Disabled Enabled Cabinet Monitoring: Trusted Module: Platform 4. 5 ­ Power Menu APM Interface: APM Power Saving: Standby Timeout: Suspend Timeout: APM Resume Timer: APM Resume Time: Power-on via LAN: Power-off via Keyboard: Power Failure Recovery: [Enabled] [Customized] [15 min] [Disabled] [Disabled] [00:00:00] [Enabled] [Disabled] [Last State] Setup Item Selections (Default Item Specific Help 46 http://www. tyan. com Thunder i7525 (S2676) APM Interface: values are in bold) Enabled Disabled APM Power Saving: Disabled Customized Maximum Savings Minimum Savings Enable/Disable Advanced Power Management (APM) BIOS-interface for non-ACPI operating systems. [Customized] User-defined management. Power Power power [Maximum Power Saving] Minimum power consumption. <Tab>, <Shift-Tab> or <Enter> selects input Standby Timeout: Suspend Timeout: APM Resume Timer: Disabled 2 min 5 min 10 min 15 min 30 min Disabled 2 min 15 min 30 min 1h 2h Disabled Enabled APM Resume Time: 00:00:00 . . . 23:59:59 47 http://www. tyan. com Thunder i7525 (S2676) Power-on via LAN: Enabled Disabled via Disabled Enabled Last State Stay Off Power On Power-off Keyboard: Power Recovery: Failure fields. Allows the system to be switched off via power button on the keyboard. [Last State] Switch to the state the system was in before power failure. 4. 6 ­ Boot Menu Halt on POST Errors: Fast Boot: Quiet Boot: Boot Menu: ?Boot Device Priority [Enabled] [Enabled] [Enabled] [Enabled] Setup Item Halt on POST Errors: Selections (Default values are in bold) Enabled Disabled Item Specific Help Pauses and displays setup entry or resume boot prompt if error occurs at boot. Allows the system to Fast Boot: Enabled 48 http://www. tyan. com Thunder i7525 (S2676) Disabled Quiet Boot: Boot Menu: Enabled Disabled Enabled Disabled Boot Device Priority - skip certain tests while booting. Before loading the OS press <F12> and select an alternate boot device from a menu. Select which order the BIOS should use between devices when trying to boot. 4. 6. 1 Boot Submenu Boot Device Priority + Removable Devices + Hard Drives + CD-ROM Drives Network Boot Setup Item - Selections (Default values are in bold) - Item Specific Help Keys used to view or configure devices: <Enter> expands or collapses devices. <Ctrl+Enter> expands all <Shift+1> enables or disables a device. <n> Move a removable 49 http://www. tyan. com Thunder i7525 (S2676) device between Hard Disk or Removable Disk 4. 7 ­ Exit Menu Save Changes & Exit Discard Changes & Exit Get Default Values Load Previous Values Setup Item Save Changes & Exit Selections (Default values are in bold) - Item Specific Help Exit System Setup and save your changes to CMOS. [. . . ] Program P6 class write combining Update keyboard LED & typematic rate 1. Boot attempt (INT 19h) 83h: 84h: 85h: 87h: 89h: 8Bh: 8Dh: 8Fh: 93h: 94h: 95h: 96h: FFh: 64 http://www. tyan. com Thunder i7525 (S2676) Compliance Information Technical Support If a problem arises with your system, you should first turn to your dealer for direct support. Your system has most likely been configured or designed by them and they should have the best idea of what hardware and software your system contains. Furthermore, if you purchased your system from a dealer near you, take the system to them directly to have it serviced instead of attempting to do so yourself (which can have expensive consequences). [. . . ]