User manual TYAN THUNDER K8SE

[. . . ] Thunder K8SE /// Version 1. 02 S2892 Copyright Copyright © TYAN Computer Corporation, 2004-2005. No part of this manual may be reproduced or translated without prior written consent from TYAN Computer Corp. Trademark All registered and unregistered trademarks and company names contained in this manual are property of their respective owners including, but not limited to the following. TYAN, Taro and Thunder K8SE are trademarks of TYAN Computer Corporation. AMD, Opteron, and combinations thereof are trademarks of AMD Corporation. [. . . ] View the system voltage value 51 http://www. tyan. com Fan Control and Monitor You can use this screen to select options for the Hardware Monitor settings. Use the <Plus> and <Minus> keys to change the value of the selected option. PhoenixBIOS Setup Utility Advanced Fan Control and Monitor Auto FAN Power Control CPU 1 Fan Speed CPU 2 Fan Speed System Fan1 Speed System Fan2 Speed System Fan3 Speed System Fan4 Speed [Disabled] Item Specific Help F1: Help õ¡ô : Select Item -/+: Change Values F9: Setup Defaults Esc: Exit ¡ö ¡÷ : Select Menu Enter: Select Sub-Menu F10: Save and Exit Feature Auto FAN Power Control Option Disabled Enabled Description Configure FAN power duty cycle control. 52 http://www. tyan. com System Voltage Monitor All items on this menu are shown only which cannot be modified. PhoenixBIOS Setup Utility Advanced Fan Control and Monitor CPU 1 Vcore (V) +3. 3V VBat (V) H1 DDR VTT 1. 3V H1 DDR 2. 5V VDD HT0 RUN VDD 3. 3V 5V 12V Item Specific Help F1: Help õ¡ô : Select Item -/+: Change Values F9: Setup Defaults Esc: Exit ¡ö ¡÷ : Select Menu Enter: Select Sub-Menu F10: Save and Exit 53 http://www. tyan. com 3. 6. 8 ­ Console Redirection Sub-Menu You can use this screen to select options for the Console Redirection settings. Use the <Plus> and <Minus> keys to change the value of the selected option. PhoenixBIOS Setup Utility Advanced Console Redirection Com Port Address Baud Rate Console Type Flow Control Console connection Continue C. R. after POST [Disabled] [19. 2K] [PC ANSL] [CTS/RTS] [Direct] [off] Item Specific Help F1: Help õ¡ô : Select Item -/+: Change Values F9: Setup Defaults Esc: Exit ¡ö ¡÷ : Select Menu Enter: Select Sub-Menu F10: Save and Exit Feature Com Port Address Baud Rate Console Type Option Disabled Onboard COMA Onboard COMB 19. 2K 300 1200 2400 9600 38. 4K 57. 6K PC ANSL VT100 VT100 8bit VT100+ 54 Description Select the Com Port address. Enable the specified baud rate. Enable the specified console type. http://www. tyan. com Flow Control PC-ANSI 7bit VT-UTF8 CTS/RTS XON/XOFF None Direct Enable flow control. Indicate whether the console is connected directly to the system or a modem is used to connect. Enable Console Redirection after OS has loaded. Console connection Via modem Continue C. R. after POST Off On 3. 7 - BIOS Memory Menu This menu has options for memory speed & latency. Use the <Plus> and <Minus> keys to change the value of the selected option. Main Advanced PhoenixBIOS Setup Utility Memory Security Boot [XXXX KB] [XXXX KB] [Enabled] [Write Back] [Write Back] [Write Back] [Write Back] [Write Back] [Write Back] [Disabled] [Disabled] [Disabled] [Disabled] [Disabled] [Disabled] Power Exit Cache Ram System Memory: Extended Memory: Memory Cache: Cache System BIOS area: Cache Video BIOS area: Cache Base 0-512k: Cache Base 512k-640k: Cache Extended Memory Area: Cache A000 ­ AFFF: Cache B000 ­ BFFF Cache C800 ­ CBFF: Cache CC00 ­ CFFF: Cache D000 ­ D3FF: Cache D400 ­ D7FF: Item Specific Help F1: Help õ¡ô : Select Item -/+: Change Values F9: Setup Defaults Esc: Exit ¡ö ¡÷ : Select Menu Enter: Select Sub-Menu F10: Save and Exit 55 http://www. tyan. com Feature Memory Cache Cache System BIOS area Cache Video BIOS area Cache Base 0-512k Cache Base 512k-640k Cache Extended Memory Area Option Enabled Disabled Write Back Write Through Write Protect uncached Write Back Write Through Write Protect uncached Write Back Write Through Write Protect uncached Write Back Write Through Write Protect uncached Write Back Write Through Write Protect uncached Disabled USHC Write Through Write Protect Write Back Description Set the state of memory cache. Control caching of system BIOS area. Control caching of video BIOS area. Control caching of 512k base memory. Control caching of 512k 640k base memory. Control caching of system memory above one megabyte. Cache A000-AFFF Cache D400-D7FF Control caching of the memory blocks. 56 http://www. tyan. com 3. 8 - Security Menu This menu has options for the Security options. Use the <Plus> and <Minus> keys to change the value of the selected option. Main Advanced PhoenixBIOS Setup Utility Memory Security Boot Power Exit Supervisor Password Is: User Password Is: Set Supervisor Password Set User Password Password on boot: Fixed disk boot sector: Diskette access: [Enter] [Enter] [Disabled] [Normal] [Supervisor] Item Specific Help F1: Help õ¡ô : Select Item -/+: Change Values F9: Setup Defaults Esc: Exit ¡ö ¡÷ : Select Menu Enter: Select Sub-Menu F10: Save and Exit Feature Password on boot Fixed disk boot sector Diskette access Option Disabled Enabled Normal Write Protect User Supervisor Description Enable password entry on boot. Control access to diskette drives. 57 http://www. tyan. com 3. 9 - BIOS Boot Menu This menu has options for the Boot Device Priority. Use the <Plus> and <Minus> keys to change the value of the selected option. Main Advanced PhoenixBIOS Setup Utility Memory Security Boot [Enabled] [Enabled] [Disabled] [Just zero it] Power Exit QuickBoot Mode: Boot-time Diagnostic Screen Summary screen Extended Memory Testing Boot Device Priority Item Specific Help F1: Help õ¡ô : Select Item -/+: Change Values F9: Setup Defaults Esc: Exit ¡ö ¡÷ : Select Menu Enter: Select Sub-Menu F10: Save and Exit Feature QuickBoot Mode Boot-time Diagnostic Screen Summary screen Option Enabled Disabled Enabled Disabled Disabled Enabled Just zero it None Menu Item Extended Memory Testing Boot Device Priority Description Allow the system to skip certain tests while booting. Determine which type of tests will be performed on extended memory (above 1M). Select the search order for the types of boot devices. 58 http://www. tyan. com 3. 9. 1 - Boot Device Priority You can use this screen to select options for the Boot Device Priority settings. Follow the "Item Specific Help" on the right side to select, move or enable the item. PhoenixBIOS Setup Utility Boot Boot Device Priority +Removable Devices +Hard Drive CD-ROM Drive Item Specific Help F1: Help õ¡ô : Select Item -/+: Change Values F9: Setup Defaults Esc: Exit ¡ö ¡÷ : Select Menu Enter: Select Sub-Menu F10: Save and Exit The boot menu will list all bootable devices. Use <Enter> to expand or collapses devices with a `+' or `-`. Use <+> or <-> to arrange the priorities of all bootable devices. 59 http://www. tyan. com 3. 10 - Power Menu This menu has options for the Power management. Use the <Plus> and <Minus> keys to change the value of the selected option. Main Advanced PhoenixBIOS Setup Utility Memory Security Boot [Disabled] [No] [Last State] Power Exit Spread Spectrum Chassis Intrusion Detect Power Loss Control Item Specific Help F1: Help õ¡ô : Select Item -/+: Change Values F9: Setup Defaults Esc: Exit ¡ö ¡÷ : Select Menu Enter: Select Sub-Menu F10: Save and Exit Feature Spread Spectrum Chassis Intrusion Detect Power Loss Control Option Disabled Enabled No Yes Stay Off Power On Description Enable or disable Spread Spectrum. Control power loss. 60 http://www. tyan. com 3. 11 - BIOS Exit Menu This menu has options for the Exit Priority. Use the <Plus> and <Minus> keys to change the value of the selected option. Main Advanced PhoenixBIOS Setup Utility Memory Security Boot [Enter] [Enter] [Enter] [Enter] [Enter] Power Exit Exit Saving Charges Exit Discarding Changes Load Setup Defaults Discard Changes Save Changes Item Specific Help F1: Help õ¡ô : Select Item -/+: Change Values F9: Setup Defaults Esc: Exit ¡ö ¡÷ : Select Menu Enter: Select Sub-Menu F10: Save and Exit Exit Saving Changes Use this option to exit setup utility and re-boot. Exit Discarding Changes Use this option to exit setup utility and re-boot. Discard Changes Use this option to restore all new setup values that you have made but not saved in CMOS. [. . . ] The CPU is lightly placed in an open ZIF socket, and a lever is pulled down. This shifts the processor over and down, guiding it into the board and locking it into place. 72 http://www. tyan. com Technical Support If a problem arises with your system, you should turn to your dealer for help first. Your system has most likely been configured by them, and they should have the best idea of what hardware and software your system contains. Furthermore, if you purchased your system from a dealer near you, you can bring your system to them to have it serviced instead of attempting to do so yourself (which can have expensive consequences). [. . . ]