User manual TYAN THUNDER K8SR
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual TYAN THUNDER K8SR. We hope that this TYAN THUNDER K8SR user guide will be useful to you.
Manual abstract: user guide TYAN THUNDER K8SR
Detailed instructions for use are in the User's Guide.
[. . . ] Thunder K8SR
Revision 1. 01
S2881
Copyright © TYAN Computer Corporation, 2001-2003. No part of this manual may be reproduced or translated without prior written consent from TYAN Computer Corp.
All registered and unregistered trademarks and company names contained in this manual are property of their respective owners including, but not limited to the following. AMD, Opteron, and combinations thereof are trademarks of AMD Corporation. Linux is a trademark of Linus Torvalds IBM, PC, AT, and PS/2 are trademarks of IBM Corporation. [. . . ] Use the Plus and Minus (+/-) keys to change the value of the selected option. Main Advanced PCI/PnP BIOS Setup Utility Boot Security Chipset Power Exit
PCI/PnP Setting Plug & Play OS PCI Latency Timer Allocate IRQ to PCI VGA Palette Snooping PCI IDE BusMaster Offboard PCI/ISA IDE Card IRQ3 IRQ4 IRQ5 IRQ7 IRQ9 IRQ10 IRQ11 IRQ14 IRQ15 DMA Channel_0 DMA Channel_1 DMA Channel_3 DMA Channel_5 DMA Channel_6 DMA Channel_7 Reserved Memory Size Feature Option Yes Plug & Play OS [No] [64] [Yes] [Disabled] [Disabled] [Auto] [Available] [Available] [Available] [Available] [Available] [Available] [Available] [Available] [Available] [Available] [Available] [Available] [Available] [Available] [Available] [Disabled]
Use [ENTER], [TAB] or [SHIFT_TAB] to select a field Use [+] or [-] to configure system time.
+/Tab F1 F10 ESC
Change Field Select Field Help Save and Exit Exit
Description The Yes setting allows the operating system to change the interrupt, I/O, and DMA settings. Set this option if the system is running Plug and
42
WWW. TYAN. COM
No
PCI Latency Timer
96 128 160 192 224 248 Yes
Allocate IRQ to PCI VGA
No Disabled
Palette Snooping
Enabled
Available IRQ3 ~ IRQ15 Reserved Available DMA0 ~ 7 Reserved Disabled Reserved Memory Size 16K ~64K Disabled C0000 ~ DC000
Reserved Memory Address
Play aware operating systems. Set No for operating systems that do not meet the Plug and Play specifications. This setting controls how many PCI clocks each PCI device can hold the bus before another PCI device takes over. When set to higher values, every PCI device can conduct transactions for a longer time and thus improve the effective PCI bandwidth. This is the default setting and should not be changed unless the VGA card manufacturer requires Palette Snooping to be Enabled. Allows user to reserve a specific IRQ for a legacy device (Note: most hardware devices & OS used do not support manual assigned ) Allows user to reserve a specific DMA for a legacy device Allows user to reserve a specific size in memory for a legacy device Allows user to reserve a specific address in memory for a legacy device
43
WWW. TYAN. COM
3. 04 BIOS Boot Menu You can display Boot Setup option by highlighting it using the Arrow ( / ) keys and pressing Enter. Main Advanced PCI/PnP BIOS Setup Utility Boot Security Chipset Power Exit
Boot Setting Boot Settings Configuration
Use [ENTER], [TAB] or [SHIFT_TAB] to select a field Use [+] or [-] to configure system time.
Boot Device Priority Removable Drives +/Tab F1 F10 ESC Change Field Select Field Help Save and Exit Exit
Boot Settings Configuration Sub-Menu Use this screen to select options for the Boot Settings Configuration. Use the Plus and Minus (+/-) keys to change the value of the selected option. Main Advanced BIOS Setup Utility PCI/PnP Boot Security Exit Chipset Power
Boot Settings Configuration Quick Boot Quiet Boot Quick Boot Add On ROM Display Mode Boot up Number-Lock PS/2 Mouse Support Typematic Rate System Keyboard Parity Check Boot To OS/2 Wait for "F1" If Error Hit "Del" Message Display Interrupt 19 Capture [Disabled] [Disabled] [Enabled] [Force BIOS] [On] [Enabled] [Fast] [Present] [Disabled] [No] [Enabled] [Enabled] [Disabled]
Use [ENTER], [TAB] or [SHIFT_TAB] to select a field Use [+] or [-] to configure system time.
+/Tab F1 F10 ESC
Change Field Select Field Help Save and Exit Exit
44
WWW. TYAN. COM
Feature Quick Boot Mode Quiet Boot Quick Boot Add On ROM Display Mode Boot up Number-Lock PS/2 Mouse Support Typematic Rate System Keyboard Parity Check Boot To OS/2 Wait for "F1" If Error Hit "Del" Message Display Interrupt 19 Capture
Option Enabled Disabled Disabled Enabled Force BIOS Keep Current On Off Enabled Disabled Fast Slow Presen Not-Present Disabled Enabled No Yes Enabled Disabled Enabled Disabled Disabled Enabled
Description This option allows user bypass BIOS self test during POST Enable this option to hide BIOS Post messages during POST Allows user to force BIOS/Option ROM of add on cards to be displayed during quiet boot Choose status of keyboard NUM LOCK key Allows user to choose status of PS/2 mouse support Choose the speed at which keys are repeated Allows user to disable all system keyboards Enables system parity check Set this option to yes only if booting to OS/2 Allows user to disable the "Press F1 to Continue" error message when error is detected Allows user to disable the "Press DEL to enter setup" message during POST Allows devices (such as network card) to capture INT19 for booting
45
WWW. TYAN. COM
3. 05 BIOS Security Menu The system can be configured so that all users must enter a password every time the system boots or when BIOS Setup is entered, using either the Supervisor password or User password. The Supervisor and User passwords activate two different levels of password security. If you select password support, you are prompted for a one to six character password. Main Advanced BIOS Setup Utility PCI/PnP Boot Security Exit Chipset Power
Security Setting Supervisor Password: User Password: Change Supervisor Password Change User Password Clear User Password Boot Sector Virus Protection [Disabled]
Use [ENTER], [TAB] or [SHIFT_TAB] to select a field Use [+] or [-] to configure system time.
+/Tab F1 F10 ESC
Change Field Select Field Help Save and Exit Exit
Feature Supervisor Password:
Option Not Installed Installed
User Password:
Not Installed Installed
Change Supervisor Password Change User Password Clear User Password 46
Description If the password has been set, Installed displays. Select this option to change Supervisor Password Select this option to change User Password Select this option to clear User Password
WWW. TYAN. COM
Boot Sector Virus Protection
Protects the first sector of the Hard Drive from being written
3. 06 BIOS Chipset Setting Menu This menu allows the user to customize functions of the AMD Chipsets. North Bridge configuration contains options for Memory & CPU settings. Additional configuration for the AMD8131 PCI-X Tunnel is available in the PCI-X Configuration Menu. Select a menu by highlighting it using the Arrow ( / ) keys and pressing Enter. Main Advanced BIOS Setup Utility PCI/PnP Boot Security Exit Chipset Power
Chipset Setting North Bridge Configuration South Bridge Configuration PCI-X Configuration
Use [ENTER], [TAB] or [SHIFT_TAB] to select a field Use [+] or [-] to configure system time. +/Tab F1 F10 ESC Change Field Select Field Help Save and Exit Exit
47
WWW. TYAN. COM
North Bridge Chipset Configuration Sub-Menu This menu gives options for customizing memory & Hypertransport settings. Select a menu by highlighting it using the Arrow ( / ) keys and pressing Enter. Main Advanced BIOS Setup Utility PCI/PnP Boot Security Exit Chipset Power
North Bridge Chipset Configuration Memory Configuration ECC Configuration IOMMU Configuration PCI-X Configuration
Use [ENTER], [TAB] or SHIFT_TAB] to select a field Use [+] or [-] to configure system time. [. . . ] Mini-PCI Standby mode: in this mode, the video and hard drives shut down; all other devices continue to operate normally. Without a proper UltraDMA controller, your system cannot take advantage of higher data transfer rates of the new UltraDMA/UltraATA hard drives. This one port type can function as a serial, parallel, mouse, keyboard or joystick port. It is fast enough to support 62
WWW. TYAN. COM
video transfer, and is capable of supporting up to 127 daisy-chained peripheral devices. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE TYAN THUNDER K8SR
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual TYAN THUNDER K8SR will begin.