Detailed instructions for use are in the User's Guide.
[. . . ] Tyan S1837
Thunderbolt
Motherboard User's Manual Revision 1. 10
Copyright © Tyan Computer Corporation, 1999. No part of this manual may be reproduced or translated without prior written consent from Tyan Computer Corp.
All registered and unregistered trademarks and company names contained in this manual are property of their respective companies including, but not limited to the following. S1837 Thunderbolt is a trademark of TYAN Computer Corporation.
Information contained in this publication has been carefully checked for accuracy and reliability. In no event will Tyan Computer be held liable for any direct or indirect, incidental or consequential damage, loss of use, loss of data, or other malady resulting from errors or inaccuracies of information contained in this manual. [. . . ] When enabled, the motherboard would provide a standby voltage to the keyboard. A: You will need go into the BIOS and enable the LAN Wake-Up for Onboard LAN (under the Power Management Setup) and the Keyboard Wake-Up Function (under the Peripheral Setup). When both functions are enabled, you can start up your system by hitting the Ctrl key and the F1 key at the same time. By default both the LAN Wake-Up and Keyboard Wake-Up functions are disabled.
S1837 Thunderbolt
53
This page is intentionally left blank.
http://www. tyan. com
54
chapter 3
BIOS
BIOS Configuration
The AMIBIOS Setup screen is shown below.
AMI BIOS EASY SETUP UTILITY Ver. 1. 16 (c)1998 American Megatrends, Inc. All Rights Reserved Advanced Security Exit System Date Fri Jan 1 1999 System Time 12:55:37 Floppy Drive A 1. 44 MB 3½ Floppy Drive B Not Installed Primary IDE Master Primary IDE Slave Secondary IDE Master Secondary IDE Slave Auto Auto Auto Auto Setup Help Month: Jan - Dec Day: 01 - 31 Year: 1901 - 2099
Main
Auto-Detect Hard Disks [ Enter ] Boot Sector Virus Protection Disabled
Previous Item Next Item Select Menu
ESC:Exit Enter:Select F5:Setup Defaults F6:Original Values F10:Save & Exit
S1837 Thunderbolt
55
Chapter 3
BIOS Configuration
You can select a Setup option by using the following keyboard keys:
Key Tab Enter Function Moves from one box to the next Opens highlighted selection
Arrow keys Changes selections within a box
The pages which follow contain explanations of the settings for the AMIBIOS Setup menus. Overall, the AMIBIOS Setup program is easy to use, and fairly intuitive. Note that the graphics in the manual are simpler than those that appear on your screen.
Main Setup
Select the AMIBIOS Setup options below by choosing Main Setup from the AMIBIOS Setup main menu. The Standard Setup menu screen is shown below.
AMI BIOS EASY SETUP UTILITY Ver. 1. 16 (c)1998 American Megatrends, Inc. All Rights Reserved Advanced Security Exit System Date Fri Jan 1 1999 System Time 12:55:37 Floppy Drive A 1. 44 MB 3½ Floppy Drive B Not Installed Primary IDE Master Primary IDE Slave Secondary IDE Master Secondary IDE Slave Auto Auto Auto Auto Setup Help Month: Jan - Dec Day: 01 - 31 Year: 1901 - 2099
Main
Auto-Detect Hard Disks [ Enter ] Boot Sector Virus Protection Disabled
Previous Item Next Item Select Menu
ESC:Exit Enter:Select F5:Setup Defaults F6:Original Values F10:Save & Exit
http://www. tyan. com
56
System Date/Time You can type the date and time in directly, or select the portion of the date or time that you want to modify and adjust it using the cursor keys. 1:00 PM is 13:00).
[ System Date Setting ] MM/DD/YY: Jan 1 1999 [ System Time Setting ] Current Time 12:00:00
Floppy Drive A: and B: Move the cursor to these fields via the arrow keys and select the floppy type. The settings are 360KB 5¼ inch, 1. 2 MB 5¼ inch, 720KB 3½ inch, 1. 44MB 3½ inch, or 2. 88MB 3½ inch. If you are not sure what type of floppy drive you have, consult the documentation that came with your drive.
OPTIONS Not Installed 360 KB 5¼ 1. 2 MB 5¼ 720 KB 3½ 1. 44MB 3½ 2. 88MB 3½
BIOS
Primary Master, Primary Slave, Secondary Master, Secondary Slave Select these options to configure the various drives. A screen with a list of drive parameters appears.
AMI BIOS EASY SETUP UTILITY Ver. 1. 16 (c)1998 American Megatrends, Inc. All Rights Reserved Main IDE Device Configuration AUTO Setup Help 1-46: Predefined types USER: Set Parameters by User AUTO: Set Parameters automatically CD-ROM: Use for ATAPI CD-ROM drives OR Double click [AUTO] to set all HDD parameters automatically
Cylinders Heads Write Precompensation Sectors Maximum Capacity LBA Mode Block Mode Fast Programmed I/O Modes 32 Bit Transfer Mode ON
ESC:Back Enter:Select :Select Items F5:Setup Defaults F6:Original Values
S1837 Thunderbolt
57
Chapter 3
BIOS Configuration
IDE Device Configuration: To have the BIOS autodetect the IDE drive, select Auto. Otherwise, you may choose one of the 46 drive types offered, or enter the parameters yourself (see Entering Drive Parameters on the next page). Consult the table below to see how to configure various drive types yourself.
Type
SC SI
How to Configure
Select Type. The SCSI drivers provided by the SCSI manufacturer should allow you to configure the SCSI drive. It is best to select Aut o to allow AMIBIOS to determine the PIO mode. If you select a PIO mode that is not supported by the IDE drive, the drive will not work properly. If you are absolutely certain that you know the drive's PIO mode, select PIO mode 0- 4, as appropriate. (MFM drives are older drivers which use an encoding scheme that produces slower data access and less storage room. ) Select Type. Select the drive type that exactly matches your drive's parameters. [. . . ] SDRAM (Synchronous Dynamic RAM) is so-called because it can keep two sets of memory addresses open simultaneously. By transferring data alternately from one set of addresses, and then the other, SDRAM cuts down on the delays associated with non-synchronous RAM, which must close one address bank before opening the next. The serial port is so called because it transmits the eight bits of a byte of data along one wire, and receives data on another single wire (that is, the data is transmitted in serial form, one bit after another). They must be installed in pairs, and do not have the carrying capacity or the speed of DIMMs. [. . . ]